Linear Technology/Analog Devices
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
LTC4358IDE#PBF
Näytä Yksityiskohdat DataSheets

LTC4358IDE#PBF

Product Overview

Category: Integrated Circuits (ICs)

Use: The LTC4358IDE#PBF is a power management IC designed to protect and control the power supply in various electronic systems. It is commonly used in applications where power source redundancy, load sharing, and protection against reverse voltage are required.

Characteristics: - Reverse Voltage Protection: The LTC4358IDE#PBF provides reverse voltage protection by preventing current flow from the output to the input when a reverse voltage condition occurs. - Load Sharing: It allows multiple power sources to be connected in parallel, enabling load sharing between them. - Overvoltage Protection: The IC monitors the input voltage and protects the system from overvoltage conditions. - Fault Detection: It detects faults such as overcurrent, overtemperature, and undervoltage conditions, providing enhanced system reliability. - Fast Switching: The LTC4358IDE#PBF features fast switching capability, ensuring seamless transition between power sources.

Package: The LTC4358IDE#PBF comes in a small 16-pin DFN (Dual Flat No-Lead) package, which offers compactness and ease of integration into various electronic systems.

Essence: The essence of LTC4358IDE#PBF lies in its ability to provide reliable power management solutions by offering reverse voltage protection, load sharing, and fault detection capabilities.

Packaging/Quantity: The LTC4358IDE#PBF is typically available in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.9V to 18V
  • Operating Temperature Range: -40°C to 85°C
  • Maximum Continuous Current: 4A
  • Reverse Voltage Protection Threshold: -40V
  • Fault Detection Thresholds: Adjustable through external resistors
  • Switching Frequency: 400kHz

Pin Configuration

The LTC4358IDE#PBF features the following pin configuration:

  1. GATE1: Gate control for MOSFET 1
  2. GATE2: Gate control for MOSFET 2
  3. VCC: Power supply input
  4. VIN: Input voltage
  5. GND: Ground
  6. FB: Feedback pin for fault detection threshold adjustment
  7. FLT: Fault indicator output
  8. OV: Overvoltage indicator output
  9. UV: Undervoltage indicator output
  10. OC: Overcurrent indicator output
  11. SS: Soft-start capacitor connection
  12. REF: Reference voltage output
  13. NC: No connect
  14. NC: No connect
  15. NC: No connect
  16. NC: No connect

Functional Features

  • Reverse Voltage Protection: The LTC4358IDE#PBF prevents reverse current flow when a reverse voltage condition is detected, protecting the system from potential damage.
  • Load Sharing: It enables multiple power sources to be connected in parallel, allowing load sharing and increasing overall system reliability.
  • Fault Detection: The IC monitors various fault conditions such as overcurrent, overtemperature, and undervoltage, providing timely fault indication for system protection.
  • Fast Switching: The LTC4358IDE#PBF ensures fast switching between power sources, minimizing downtime during power source transitions.

Advantages and Disadvantages

Advantages: - Efficient reverse voltage protection - Load sharing capability for enhanced system reliability - Comprehensive fault detection mechanism - Fast switching between power sources

Disadvantages: - Limited maximum continuous current (4A) - Requires external resistors for fault detection threshold adjustment

Working Principles

The LTC4358IDE#PBF operates by monitoring the input voltage and controlling the gate voltages of two MOSFETs connected in series. It ensures that the output voltage is always higher than the input voltage, providing reverse voltage protection. The IC also monitors various fault conditions and provides fault indication outputs for system protection.

Detailed Application Field Plans

The LTC4358IDE#PBF finds applications in a wide range of electronic systems, including: 1. Power supply redundancy systems 2. Battery backup systems 3. Industrial automation equipment 4. Telecommunications infrastructure 5. Automotive electronics 6. Server and data center power management

Detailed and Complete Alternative Models

  1. LTC4357: Similar to LTC4358IDE#PBF but with a different pin configuration.
  2. LTC4359: Offers additional features such as adjustable current limit and thermal shutdown.
  3. LTC4360: Provides reverse voltage protection and overvoltage protection in a single package.

These alternative models offer similar functionality to the LTC4358IDE#PBF and can be considered based on specific application requirements.

Word count: 615 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät LTC4358IDE#PBF :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of LTC4358IDE#PBF in technical solutions:

  1. Q: What is LTC4358IDE#PBF? A: LTC4358IDE#PBF is a high-performance ideal diode-OR controller IC designed for power supply redundancy applications.

  2. Q: What is the purpose of LTC4358IDE#PBF? A: The purpose of LTC4358IDE#PBF is to provide seamless power source switching and protection against reverse voltage, overcurrent, and overvoltage conditions.

  3. Q: How does LTC4358IDE#PBF achieve power source switching? A: LTC4358IDE#PBF uses MOSFETs as ideal diodes to control the power path between two input sources, ensuring that only one source is active at a time.

  4. Q: Can LTC4358IDE#PBF handle high currents? A: Yes, LTC4358IDE#PBF can handle high currents up to several amps, depending on the external MOSFETs used.

  5. Q: Does LTC4358IDE#PBF require any external components? A: Yes, LTC4358IDE#PBF requires external MOSFETs, sense resistors, and capacitors for proper operation.

  6. Q: What protections does LTC4358IDE#PBF offer? A: LTC4358IDE#PBF provides reverse voltage protection, overcurrent protection, and overvoltage protection to safeguard the system.

  7. Q: Can LTC4358IDE#PBF be used in automotive applications? A: Yes, LTC4358IDE#PBF is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

  8. Q: Is LTC4358IDE#PBF compatible with different input voltage levels? A: Yes, LTC4358IDE#PBF can be used with a wide range of input voltage levels, typically from 2.5V to 18V.

  9. Q: Can LTC4358IDE#PBF be used in parallel for higher current applications? A: Yes, multiple LTC4358IDE#PBF ICs can be used in parallel to handle higher current requirements.

  10. Q: Where can I find more information about LTC4358IDE#PBF and its application notes? A: You can find detailed information, datasheets, and application notes on the manufacturer's website or by contacting their technical support team.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the official documentation and consult with technical experts for accurate information.