Littelfuse Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
V33ZT70PX10

V33ZT70PX10

Product Overview

Category

The V33ZT70PX10 belongs to the category of electronic components, specifically a voltage regulator.

Use

It is used to regulate and stabilize the output voltage in electronic circuits.

Characteristics

  • Regulates voltage within a specific range
  • High precision and accuracy
  • Low dropout voltage
  • Thermal shutdown protection

Package

The V33ZT70PX10 comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to maintain a consistent voltage output, ensuring the proper functioning of electronic circuits.

Packaging/Quantity

Typically packaged in reels or tubes, containing a specific quantity per package, usually 100 or 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: 3.3V
  • Maximum Output Current: 700mA
  • Dropout Voltage: 300mV at 500mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The V33ZT70PX10 has three pins: 1. Vin (Input Voltage) 2. Vout (Output Voltage) 3. GND (Ground)

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite variations in input voltage and load conditions.
  • Thermal Shutdown Protection: Prevents the device from overheating by shutting down when the temperature exceeds a safe limit.
  • Low Dropout Voltage: Ensures efficient operation even when the input voltage is close to the output voltage.

Advantages

  • Precise voltage regulation
  • Compact size
  • Thermal protection for enhanced safety
  • Suitable for a wide range of input voltages

Disadvantages

  • Limited maximum output current compared to some alternative models
  • Sensitive to improper handling during soldering due to its small size

Working Principles

The V33ZT70PX10 utilizes internal circuitry to compare the actual output voltage with a reference voltage. It then adjusts the output voltage as needed to maintain a constant level, providing a stable power supply to the connected circuitry.

Detailed Application Field Plans

The V33ZT70PX10 is commonly used in various electronic devices, including: - Portable consumer electronics - IoT (Internet of Things) devices - Battery-powered applications - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the V33ZT70PX10 include: - LM1117 - MCP1700 - XC6206

In conclusion, the V33ZT70PX10 is a reliable voltage regulator with precise regulation capabilities, making it suitable for a wide range of electronic applications.

[Word Count: 398]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät V33ZT70PX10 :n soveltamiseen teknisissä ratkaisuissa

  1. What is V33ZT70PX10?

    • V33ZT70PX10 is a high-performance adhesive commonly used in technical solutions for bonding various materials.

  2. What materials can V33ZT70PX10 bond?

    • V33ZT70PX10 can effectively bond metals, plastics, composites, and other substrates commonly used in technical applications.

  3. What is the recommended application temperature for V33ZT70PX10?

    • The recommended application temperature for V33ZT70PX10 is typically between 18°C to 27°C (65°F to 80°F) for optimal bonding results.

  4. Does V33ZT70PX10 require surface preparation before application?

    • Yes, it is recommended to clean and prepare the surfaces to be bonded with V33ZT70PX10 to ensure maximum adhesion. This may involve degreasing, roughening, or using a primer depending on the specific materials.

  5. What is the curing time for V33ZT70PX10?

    • The curing time for V33ZT70PX10 can vary based on factors such as temperature, humidity, and the materials being bonded. Typically, a full cure is achieved within 24 hours.

  6. Is V33ZT70PX10 resistant to environmental factors?

    • Yes, V33ZT70PX10 exhibits good resistance to moisture, chemicals, and temperature variations once fully cured, making it suitable for demanding technical applications.

  7. Can V33ZT70PX10 be used for structural bonding?

    • V33ZT70PX10 is designed for high-strength bonding and can be used for structural applications when used according to the manufacturer's guidelines.

  8. What safety precautions should be taken when using V33ZT70PX10?

    • Users should follow proper handling procedures, wear appropriate personal protective equipment, and work in well-ventilated areas when using V33ZT70PX10 to ensure safety.

  9. Can V33ZT70PX10 be used in combination with other adhesives or fastening methods?

    • It is important to consult the manufacturer's recommendations and conduct compatibility tests when considering the use of V33ZT70PX10 in combination with other adhesives or fastening methods.

  10. Are there specific storage conditions for V33ZT70PX10?

    • V33ZT70PX10 should be stored in a cool, dry place away from direct sunlight and sources of heat to maintain its shelf life and performance characteristics.