Macronix
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MX25L6406EMBI-12G
Näytä Yksityiskohdat DataSheets

MX25L6406EMBI-12G

Product Overview

Category

The MX25L6406EMBI-12G belongs to the category of non-volatile memory products.

Use

This product is primarily used for storing and retrieving data in electronic devices.

Characteristics

  • Non-volatile: The MX25L6406EMBI-12G retains stored data even when power is removed.
  • High capacity: This product has a storage capacity of 64 megabits (8 megabytes).
  • Fast access time: The MX25L6406EMBI-12G offers quick read and write operations.
  • Low power consumption: It is designed to consume minimal power during operation.

Package

The MX25L6406EMBI-12G is available in a compact, surface-mount package.

Essence

This product is an essential component for data storage in various electronic devices.

Packaging/Quantity

The MX25L6406EMBI-12G is typically packaged in reels and is available in large quantities.

Specifications

  • Memory capacity: 64 megabits (8 megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating voltage: 2.7V - 3.6V
  • Operating temperature range: -40°C to +85°C
  • Erase/Program cycles: 100,000 cycles (minimum)

Detailed Pin Configuration

The MX25L6406EMBI-12G has the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. VCC (Power supply)
  8. Ground (GND)

Functional Features

  • High-speed data transfer: The MX25L6406EMBI-12G supports fast data transfer rates.
  • Sector erase and program: It allows for efficient erasing and programming of specific memory sectors.
  • Write protection: The write protect pin (/WP) can be used to prevent accidental data modification.
  • Hold function: The hold pin (/HOLD) allows the device to pause ongoing operations without losing data.

Advantages and Disadvantages

Advantages

  • Large storage capacity
  • Fast access time
  • Low power consumption
  • Compact package size
  • High-speed data transfer

Disadvantages

  • Limited erase/program cycles (100,000 cycles)

Working Principles

The MX25L6406EMBI-12G utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells that retain information even when power is removed. The device can be accessed and manipulated through specific commands sent via the SPI interface.

Detailed Application Field Plans

The MX25L6406EMBI-12G is widely used in various electronic devices, including but not limited to: - Consumer electronics (e.g., smartphones, tablets) - Automotive systems (e.g., infotainment systems, instrument clusters) - Industrial equipment (e.g., control systems, data loggers) - Communication devices (e.g., routers, modems)

Detailed and Complete Alternative Models

  1. MX25L3206EMBI-12G: 32 megabits (4 megabytes) capacity
  2. MX25L12835FZNI-10G: 128 megabits (16 megabytes) capacity, different package type
  3. MX25L25673GM2I-10G: 256 megabits (32 megabytes) capacity, higher operating temperature range

These alternative models offer different capacities and features to suit specific application requirements.

Word count: 411

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MX25L6406EMBI-12G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MX25L6406EMBI-12G in technical solutions:

  1. Q: What is MX25L6406EMBI-12G? A: MX25L6406EMBI-12G is a serial flash memory chip manufactured by Macronix. It has a capacity of 64 megabits (8 megabytes) and operates at a voltage range of 2.7V to 3.6V.

  2. Q: What are some typical applications for MX25L6406EMBI-12G? A: MX25L6406EMBI-12G is commonly used in various electronic devices such as routers, set-top boxes, digital cameras, printers, and other consumer electronics that require non-volatile storage.

  3. Q: What is the interface used to communicate with MX25L6406EMBI-12G? A: MX25L6406EMBI-12G uses a Serial Peripheral Interface (SPI) for communication. It supports both single and dual SPI modes.

  4. Q: What is the maximum data transfer rate supported by MX25L6406EMBI-12G? A: MX25L6406EMBI-12G supports a maximum clock frequency of 104 MHz, which translates to a maximum data transfer rate of 52 megabytes per second.

  5. Q: Can MX25L6406EMBI-12G be easily integrated into existing designs? A: Yes, MX25L6406EMBI-12G is designed to be pin-compatible with other popular flash memory chips, making it relatively easy to replace or upgrade existing designs.

  6. Q: Does MX25L6406EMBI-12G support hardware write protection? A: Yes, MX25L6406EMBI-12G provides hardware write protection through a Write Protect (WP#) pin. When WP# is pulled low, write operations to the memory are disabled.

  7. Q: What is the typical endurance of MX25L6406EMBI-12G? A: MX25L6406EMBI-12G has a typical endurance of 100,000 program/erase cycles per sector. This means that each sector can be written and erased up to 100,000 times before it may start to degrade.

  8. Q: Can MX25L6406EMBI-12G operate in extreme temperature conditions? A: Yes, MX25L6406EMBI-12G is designed to operate in a wide temperature range, typically from -40°C to +85°C, making it suitable for applications in harsh environments.

  9. Q: Does MX25L6406EMBI-12G support software protection features? A: Yes, MX25L6406EMBI-12G provides software protection features such as block lock protection and individual sector protection, allowing specific areas of the memory to be locked or protected from accidental erasure or modification.

  10. Q: Is MX25L6406EMBI-12G RoHS compliant? A: Yes, MX25L6406EMBI-12G is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring that it meets environmental standards and regulations.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.