MaxBotix Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MB7383-130
Näytä Yksityiskohdat DataSheets

MB7383-130 Product Overview

Introduction

The MB7383-130 is a versatile ultrasonic sensor designed for a wide range of applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Ultrasonic Sensor
  • Use: Distance measurement and object detection
  • Characteristics: High accuracy, compact size, wide operating range
  • Package: Sealed housing for outdoor use
  • Essence: Utilizes ultrasonic waves to measure distance
  • Packaging/Quantity: Available in single units or bulk packaging

Specifications

  • Operating Range: 30 cm to 500 cm
  • Resolution: 1 cm
  • Operating Voltage: 3.0V to 5.5V
  • Output: Analog voltage signal
  • Operating Frequency: 42 kHz
  • Temperature Compensation: Yes
  • Protection Rating: IP67

Detailed Pin Configuration

  • Pin 1 (Vcc): Power supply input
  • Pin 2 (GND): Ground connection
  • Pin 3 (AN): Analog output signal

Functional Features

  • High Accuracy: Provides precise distance measurements
  • Wide Operating Range: Suitable for various distance measurement applications
  • Temperature Compensation: Ensures reliable performance in different environmental conditions
  • Sealed Housing: Designed for outdoor use, offering protection against dust and water ingress

Advantages and Disadvantages

Advantages

  • Accurate distance measurement
  • Versatile application possibilities
  • Reliable performance in diverse environments

Disadvantages

  • Limited to non-contact applications
  • Analog output may require additional processing for some applications

Working Principles

The MB7383-130 operates on the principle of emitting ultrasonic pulses and measuring the time taken for the echoes to return. By calculating the time difference, it accurately determines the distance to the target object.

Detailed Application Field Plans

The MB7383-130 finds extensive use in various fields, including: - Robotics: for obstacle avoidance and navigation - Industrial automation: for object detection and positioning - Automotive: for parking assistance and collision avoidance systems - Agriculture: for crop monitoring and yield estimation

Detailed and Complete Alternative Models

  • MB7360: Similar operating range with digital output
  • MB1242: Longer range with higher resolution
  • MB1000: Shorter range with compact design

In conclusion, the MB7383-130 ultrasonic sensor offers high accuracy, wide operating range, and reliable performance, making it suitable for diverse applications across different industries.

[Word Count: 411]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MB7383-130 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the operating range of the MB7383-130 ultrasonic sensor?

    • The operating range of the MB7383-130 ultrasonic sensor is 20 cm to 765 cm.

  2. What is the beam pattern of the MB7383-130 ultrasonic sensor?

    • The MB7383-130 has a narrow detection beam pattern, making it suitable for precise distance measurements.

  3. Can the MB7383-130 be used in outdoor environments?

    • Yes, the MB7383-130 is designed to perform reliably in both indoor and outdoor environments.

  4. What output does the MB7383-130 provide?

    • The MB7383-130 provides analog voltage output proportional to the distance measured.

  5. Is the MB7383-130 resistant to interference from other ultrasonic sensors?

    • Yes, the MB7383-130 is equipped with filtering to minimize interference from other ultrasonic sensors.

  6. What are the typical applications for the MB7383-130?

    • Typical applications for the MB7383-130 include robotics, industrial automation, level sensing, and distance measurement in various technical solutions.

  7. Does the MB7383-130 require calibration before use?

    • The MB7383-130 comes pre-calibrated and typically does not require additional calibration before use.

  8. Can the MB7383-130 detect multiple objects simultaneously?

    • The MB7383-130 is capable of detecting multiple objects, but it may require advanced signal processing for accurate measurements in such scenarios.

  9. What power supply voltage does the MB7383-130 require?

    • The MB7383-130 operates on a supply voltage of 3.0V to 5.5V DC.

  10. Is the MB7383-130 easy to integrate into existing systems?

    • Yes, the MB7383-130 features a compact design and simple interface, making it relatively easy to integrate into various technical solutions.