Maxim Integrated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
DS1844S-010+T&R
Näytä Yksityiskohdat DataSheets

DS1844S-010+T&R

Product Overview

Category

The DS1844S-010+T&R belongs to the category of electronic components.

Use

This product is commonly used in various electronic devices and circuits for controlling and adjusting resistance values.

Characteristics

  • Precision: The DS1844S-010+T&R offers high precision in resistance adjustment, ensuring accurate control.
  • Digital Control: It can be digitally controlled through a microcontroller or other digital interfaces.
  • Non-Volatile Memory: The DS1844S-010+T&R retains its resistance value even when power is removed, allowing for consistent settings upon power-up.
  • Low Power Consumption: This component operates with low power consumption, making it suitable for battery-powered applications.

Package

The DS1844S-010+T&R comes in a compact surface-mount package, which facilitates easy integration onto circuit boards.

Essence

The essence of the DS1844S-010+T&R lies in its ability to provide precise resistance adjustment in electronic systems, enhancing their functionality and performance.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of DS1844S-010+T&R units. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Resistance Range: 0Ω to 10kΩ
  • Resolution: 256 steps
  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Interface: Serial (I2C)

Detailed Pin Configuration

The DS1844S-010+T&R features the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground connection
  3. SDA: Serial data line for communication
  4. SCL: Serial clock line for communication
  5. A0: Address selection bit 0 (for I2C communication)
  6. A1: Address selection bit 1 (for I2C communication)
  7. W: Write protection pin

Functional Features

  • Resistance Adjustment: The DS1844S-010+T&R allows precise resistance adjustment through digital control, enabling fine-tuning of electronic circuits.
  • Non-Volatile Memory: The component retains its resistance value even when power is removed, ensuring consistent settings upon power-up.
  • Multiple Address Selection: With address selection pins, multiple DS1844S-010+T&R devices can be used on the same bus, expanding the range of applications.

Advantages and Disadvantages

Advantages

  • High precision in resistance adjustment
  • Digital control for accurate and convenient adjustments
  • Non-volatile memory ensures consistent settings
  • Low power consumption for energy-efficient operation

Disadvantages

  • Limited resistance range compared to some other components
  • Requires a microcontroller or digital interface for control

Working Principles

The DS1844S-010+T&R utilizes a combination of digital control and integrated resistive elements to achieve precise resistance adjustment. When a specific resistance value is desired, the digital control interface communicates with the component, which adjusts the resistance accordingly. The non-volatile memory ensures that the set resistance value is retained even when power is removed.

Detailed Application Field Plans

The DS1844S-010+T&R finds applications in various fields, including:

  1. Audio Equipment: Precise resistance adjustment is crucial in audio systems for volume control and tone shaping.
  2. Industrial Automation: This component can be used in industrial automation systems for calibration and fine-tuning of control circuits.
  3. Medical Devices: In medical equipment, the DS1844S-010+T&R enables accurate resistance adjustment for precise measurements and control.
  4. Automotive Electronics: The component can be utilized in automotive electronics for controlling various parameters, such as lighting intensity and motor speed.

Detailed and Complete Alternative Models

  1. DS1804S-010+T&R: Similar to the DS1844S-010+T&R, this model offers precise resistance adjustment with a slightly different pin configuration.
  2. MCP4017T-103E/OT: This alternative model provides similar functionality and characteristics, including digital control and non-volatile memory.

Please note that the above list is not exhaustive, and there may be other alternative models available in the market.

Word count: 603 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät DS1844S-010+T&R :n soveltamiseen teknisissä ratkaisuissa

  1. Question: What is the DS1844S-010+T&R?
    Answer: The DS1844S-010+T&R is a digital potentiometer IC (integrated circuit) that can be used in various technical solutions.

  2. Question: What is the purpose of using the DS1844S-010+T&R in technical solutions?
    Answer: The DS1844S-010+T&R can be used to adjust resistance digitally, making it useful for applications where precise control over resistance is required.

  3. Question: What are some common technical solutions where the DS1844S-010+T&R can be applied?
    Answer: Some common applications include audio equipment, instrumentation, industrial control systems, and electronic testing equipment.

  4. Question: How does the DS1844S-010+T&R work?
    Answer: The DS1844S-010+T&R works by utilizing digital signals to control the resistance value. It has an internal resistor network that can be adjusted digitally.

  5. Question: What is the voltage range supported by the DS1844S-010+T&R?
    Answer: The DS1844S-010+T&R supports a voltage range of 2.7V to 5.5V.

  6. Question: Can the DS1844S-010+T&R be controlled using a microcontroller?
    Answer: Yes, the DS1844S-010+T&R can be easily controlled using a microcontroller through its digital interface.

  7. Question: Is the DS1844S-010+T&R suitable for high-precision applications?
    Answer: Yes, the DS1844S-010+T&R offers high resolution and low temperature coefficient, making it suitable for high-precision applications.

  8. Question: Can multiple DS1844S-010+T&R ICs be cascaded together?
    Answer: Yes, multiple DS1844S-010+T&R ICs can be cascaded together to achieve higher resistance values or control multiple channels.

  9. Question: Does the DS1844S-010+T&R have non-volatile memory?
    Answer: Yes, the DS1844S-010+T&R has non-volatile memory, which means it retains its settings even when power is removed.

  10. Question: What is the temperature range in which the DS1844S-010+T&R operates?
    Answer: The DS1844S-010+T&R operates within a temperature range of -40°C to +85°C.