Maxim Integrated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MAX34451ETNA1+T
Näytä Yksityiskohdat DataSheets

MAX34451ETNA1+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 56-Pin TQFN
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 2A
  • Switching Frequency: 100kHz to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX34451ETNA1+T has a total of 56 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. VCC: Supply Voltage
  4. EN: Enable Pin
  5. FB: Feedback Pin
  6. COMP: Compensation Pin
  7. SS/TR: Soft-Start/Tracking Pin
  8. PGND: Power Ground
  9. AGND: Analog Ground
  10. BST: Bootstrap Pin
  11. SW: Switch Node
  12. LX: Inductor Connection
  13. VOUT: Output Voltage

(Note: The remaining pins are not listed for brevity.)

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency design minimizes power loss.
  • Low power consumption in standby mode.
  • Adjustable output voltage provides flexibility.
  • Overcurrent and overtemperature protection ensures safe operation.

Advantages and Disadvantages

Advantages: - Wide input voltage range enables compatibility with various power sources. - High efficiency reduces energy waste and prolongs battery life. - Compact package size saves board space. - Comprehensive protection features enhance system reliability.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Higher cost compared to traditional linear regulators.

Working Principles

The MAX34451ETNA1+T is a voltage regulator IC that utilizes a switching topology to efficiently convert the input voltage to a regulated output voltage. It employs a pulse-width modulation (PWM) control scheme to adjust the duty cycle of the internal power switch, allowing precise regulation of the output voltage. The feedback loop continuously monitors the output voltage and adjusts the duty cycle accordingly to maintain the desired voltage level.

Detailed Application Field Plans

The MAX34451ETNA1+T is well-suited for various applications, including but not limited to:

  1. Industrial Automation: Power management in factory automation systems.
  2. Automotive Electronics: Voltage regulation in automotive infotainment systems.
  3. Telecommunications: Power supply for network equipment and base stations.
  4. Renewable Energy: Voltage conversion in solar power systems.
  5. Consumer Electronics: Efficient power management in portable devices.

Detailed and Complete Alternative Models

  1. MAX34452ETNA1+T: Similar specifications with additional fault protection features.
  2. MAX34453ETNA1+T: Higher maximum output current capability.
  3. MAX34454ETNA1+T: Lower input voltage range for specific applications.

(Note: The list above includes only a few alternative models. Please refer to the manufacturer's datasheet for a complete list.)

This entry provides an overview of the MAX34451ETNA1+T voltage regulator IC. It covers its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX34451ETNA1+T :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MAX34451ETNA1+T in technical solutions:

Q1: What is the MAX34451ETNA1+T? A1: The MAX34451ETNA1+T is a specific model of integrated circuit (IC) designed for power monitoring and management applications.

Q2: What are the key features of the MAX34451ETNA1+T? A2: Some key features include high-accuracy power measurement, multiple voltage and current inputs, digital communication interfaces, and built-in protection features.

Q3: What are the typical applications of the MAX34451ETNA1+T? A3: The MAX34451ETNA1+T is commonly used in various technical solutions such as server power supplies, industrial automation systems, energy management systems, and battery charging circuits.

Q4: How does the MAX34451ETNA1+T measure power accurately? A4: The IC uses a combination of voltage and current sensing techniques along with advanced algorithms to provide accurate power measurements.

Q5: Can the MAX34451ETNA1+T monitor multiple power sources simultaneously? A5: Yes, the IC has multiple voltage and current inputs, allowing it to monitor and measure power from different sources concurrently.

Q6: Does the MAX34451ETNA1+T support digital communication interfaces? A6: Yes, the IC supports popular digital communication protocols such as I2C and SMBus, enabling easy integration with microcontrollers or other digital systems.

Q7: What kind of protection features does the MAX34451ETNA1+T offer? A7: The IC includes built-in protection features like overvoltage protection, undervoltage lockout, and thermal shutdown to ensure safe operation in various conditions.

Q8: Can the MAX34451ETNA1+T be used in battery charging circuits? A8: Yes, the IC is suitable for battery charging applications as it can accurately measure power and monitor charging parameters.

Q9: Is the MAX34451ETNA1+T compatible with low-power systems? A9: Yes, the IC has a low-power mode that reduces its power consumption, making it suitable for energy-efficient designs.

Q10: Where can I find more information about the MAX34451ETNA1+T? A10: You can refer to the datasheet and application notes provided by the manufacturer or visit their official website for detailed information on the IC's specifications and usage guidelines.