Maxim Integrated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MAX4744ELB+TG104

MAX4744ELB+TG104

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: Low-power, precision, rail-to-rail output
  • Package: 6-WLP (Wafer Level Package)
  • Essence: Operational amplifier
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Supply Voltage: 1.8V to 5.5V
  • Input Offset Voltage: ±0.5mV (maximum)
  • Gain Bandwidth Product: 2MHz
  • Slew Rate: 1V/µs
  • Quiescent Current: 20µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX4744ELB+TG104 has a total of six pins:

  1. OUT: Output pin
  2. IN+: Non-inverting input pin
  3. IN-: Inverting input pin
  4. V+: Positive supply voltage pin
  5. V-: Negative supply voltage pin
  6. NC: No connection pin

Functional Features

  • Rail-to-rail output swing
  • Low quiescent current
  • Low input offset voltage
  • Wide supply voltage range
  • Unity-gain stable
  • ESD protection on all pins

Advantages and Disadvantages

Advantages

  • Wide operating temperature range
  • Low power consumption
  • High precision
  • Small package size
  • ESD protection for enhanced durability

Disadvantages

  • Limited gain bandwidth product
  • Moderate slew rate

Working Principles

The MAX4744ELB+TG104 is an operational amplifier designed for low-power applications. It operates from a wide supply voltage range of 1.8V to 5.5V, making it suitable for battery-powered devices. The amplifier features rail-to-rail output swing, allowing it to drive signals close to the supply rails.

The low quiescent current of 20µA ensures minimal power consumption, making it ideal for portable and energy-efficient applications. The input offset voltage is kept low at ±0.5mV, ensuring high precision in signal amplification.

Detailed Application Field Plans

The MAX4744ELB+TG104 is commonly used in various applications, including:

  1. Portable audio devices
  2. Sensor signal conditioning
  3. Battery-powered instrumentation
  4. Industrial control systems
  5. Medical equipment
  6. Automotive electronics

Its low-power characteristics, precision, and rail-to-rail output make it suitable for these applications where space, power efficiency, and accuracy are crucial.

Detailed and Complete Alternative Models

  • MAX44246: Low-power, precision operational amplifier with rail-to-rail output
  • MAX4239: Precision, low-noise operational amplifier with rail-to-rail output
  • MAX9620: Low-power, precision operational amplifier with wide supply voltage range

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 334 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX4744ELB+TG104 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MAX4744ELB+TG104 in technical solutions:

  1. Q: What is MAX4744ELB+TG104? A: MAX4744ELB+TG104 is a specific model of operational amplifier (op-amp) manufactured by Maxim Integrated. It is designed for various technical applications.

  2. Q: What are the key features of MAX4744ELB+TG104? A: Some key features of MAX4744ELB+TG104 include low input offset voltage, rail-to-rail input/output capability, low quiescent current, and wide supply voltage range.

  3. Q: What are the typical applications of MAX4744ELB+TG104? A: MAX4744ELB+TG104 can be used in various applications such as sensor signal conditioning, battery-powered systems, portable devices, and audio amplification.

  4. Q: What is the maximum supply voltage supported by MAX4744ELB+TG104? A: MAX4744ELB+TG104 supports a maximum supply voltage of +5.5V.

  5. Q: Can MAX4744ELB+TG104 operate with a single power supply? A: Yes, MAX4744ELB+TG104 can operate with a single power supply, typically ranging from +2.7V to +5.5V.

  6. Q: What is the input offset voltage of MAX4744ELB+TG104? A: The input offset voltage of MAX4744ELB+TG104 is typically around 500µV.

  7. Q: Does MAX4744ELB+TG104 support rail-to-rail input/output operation? A: Yes, MAX4744ELB+TG104 supports rail-to-rail input/output operation, allowing it to handle signals close to the supply rails.

  8. Q: What is the quiescent current consumption of MAX4744ELB+TG104? A: The quiescent current consumption of MAX4744ELB+TG104 is typically around 1µA.

  9. Q: Can MAX4744ELB+TG104 be used in low-power applications? A: Yes, MAX4744ELB+TG104's low quiescent current makes it suitable for low-power applications where power efficiency is important.

  10. Q: Is MAX4744ELB+TG104 available in a surface-mount package? A: Yes, MAX4744ELB+TG104 is available in a surface-mount package, specifically the TG104 package option.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.