MAX4828ELT+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Level Translator
• Characteristics: High-speed, Low-power, Wide voltage range
• Package: 6-pin Thin SOT23
• Essence: Translates logic-level signals between different voltage domains
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• Logic Input Voltage Range: 1.65V to VCC
• Logic Output Voltage Range: 1.65V to VCC
• Maximum Data Rate: 100 Mbps
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX4828ELT+T has the following pin configuration:

```

---

| | --| VCC GND |-- Pin 1: Ground (GND) --| A B |-- Pin 2: Logic Input A --| Y Z |-- Pin 3: Logic Output Y --| OE VCC |-- Pin 4: Output Enable (OE) --| B A |-- Pin 5: Logic Input B |___________| ```

Functional Features

• Bi-directional voltage level translation
• Supports bidirectional data flow
• Low power consumption
• High-speed operation
• Wide voltage range compatibility
• Output enable control for easy interfacing

Advantages and Disadvantages

Advantages: - Allows seamless communication between devices operating at different voltage levels - Supports high-speed data transmission - Low power consumption enhances battery life in portable applications - Small package size enables space-constrained designs

Disadvantages: - Limited to a maximum data rate of 100 Mbps - Not suitable for applications requiring voltage translation beyond the specified range

Working Principles

The MAX4828ELT+T is a voltage level translator IC that enables seamless communication between devices operating at different voltage domains. It features bidirectional translation, allowing data to flow in both directions. The device operates within a wide voltage range, making it compatible with various logic families.

The logic inputs (A and B) accept signals from one voltage domain, while the logic outputs (Y and Z) provide translated signals for another voltage domain. The output enable (OE) pin controls the direction of data flow. When OE is low, the device is enabled, and data can be transmitted bidirectionally. When OE is high, the device is disabled, and the outputs are in a high-impedance state.

Detailed Application Field Plans

The MAX4828ELT+T finds applications in various fields where voltage level translation is required. Some potential application areas include:

1. Microcontroller Interfaces: The IC facilitates communication between microcontrollers operating at different voltage levels, enabling seamless integration of multiple devices in a system.

2. Sensor Networks: In sensor networks, where sensors may operate at different voltage levels, the MAX4828ELT+T ensures compatibility and efficient data exchange between sensors and control units.

3. Industrial Automation: The IC can be used in industrial automation systems to interface between different logic families, ensuring reliable communication between various components.

4. Consumer Electronics: The device is suitable for consumer electronics applications, such as smartphones, tablets, and wearable devices, where different subsystems may operate at different voltage levels.

Detailed and Complete Alternative Models

1. TXB0108PWR: 8-bit Bidirectional Voltage-Level Translator
2. SN74LVC4245APWR: Octal Bus Transceiver with Voltage-Level Translation
3. PCA9306DCUR: Dual Bidirectional I2C-Bus and SMBus Voltage-Level Translator

These alternative models offer similar functionality and can be considered as alternatives to the MAX4828ELT+T based on specific application requirements.

In conclusion, the MAX4828ELT+T is a versatile voltage level translator IC that enables seamless communication between devices operating at different voltage domains. With its high-speed operation, low power consumption, and wide voltage range compatibility, it finds applications in various fields, including microcontroller interfaces, sensor networks, industrial automation, and consumer electronics.