MAX4895EETE+T
Product Overview
- Category: Integrated Circuit (IC)
- Use: MAX4895EETE+T is a low-power, high-speed, slew-rate-limited RS-485/RS-422 transceiver for full-duplex communication.
- Characteristics: It features a wide 3V to 5.5V supply voltage range, low current consumption, and high data rates, making it suitable for industrial control systems, building automation, and point-of-sale terminals.
- Package: The MAX4895EETE+T comes in a 16-pin TQFN package.
- Essence: This transceiver provides reliable communication in noisy environments while consuming minimal power.
- Packaging/Quantity: Available in tape and reel packaging with a quantity of 2500 units per reel.
Specifications
- Supply Voltage Range: 3V to 5.5V
- Data Rate: Up to 25Mbps
- Operating Temperature Range: -40°C to +85°C
- Quiescent Current: 300µA (typical)
Detailed Pin Configuration
- A
- B
- GND
- RO
- RE
- DE
- DI
- VCC
- GND
- Y
- Z
- GND
- GND
- GND
- GND
- GND
Functional Features
- Slew-Rate Limited Driver for Reduced EMI
- Short-Circuit Protection
- Hot-Swap Capability
- Low Quiescent Current
Advantages
- Wide Supply Voltage Range
- High Data Rate
- Low Power Consumption
- Robust Communication in Noisy Environments
Disadvantages
- Limited to Full-Duplex Communication
- Requires External Biasing Resistors
Working Principles
The MAX4895EETE+T uses slew-rate limiting to reduce electromagnetic interference (EMI) and provide robust communication in noisy industrial environments. It employs short-circuit protection and hot-swap capability to ensure system reliability.
Detailed Application Field Plans
This transceiver is ideal for use in industrial control systems, building automation, and point-of-sale terminals where reliable communication over long cable runs in noisy environments is essential. Its low power consumption makes it suitable for battery-powered applications.
Detailed and Complete Alternative Models
- MAX487EESA+: Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceiver
- SN65HVD485E: RS-485 Transceiver with 3.3-V to 5-V Supply Voltage Range
Word count: 366
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX4895EETE+T :n soveltamiseen teknisissä ratkaisuissa
What is the MAX4895EETE+T?
- The MAX4895EETE+T is a high-speed, low-power, quad-channel RS-485/RS-422 transceiver.
What is the operating voltage range of MAX4895EETE+T?
- The operating voltage range of MAX4895EETE+T is from 3V to 5.5V.
What is the data rate supported by MAX4895EETE+T?
- MAX4895EETE+T supports data rates up to 25Mbps, making it suitable for high-speed communication applications.
What are the typical applications of MAX4895EETE+T?
- Typical applications of MAX4895EETE+T include industrial automation, process control, motor control, and instrumentation.
Does MAX4895EETE+T support half-duplex and full-duplex communication?
- Yes, MAX4895EETE+T supports both half-duplex and full-duplex communication modes.
What is the thermal shutdown feature in MAX4895EETE+T?
- MAX4895EETE+T includes a thermal shutdown feature to protect the device during fault conditions.
Is MAX4895EETE+T ESD protected?
- Yes, MAX4895EETE+T provides ±15kV human-body model (HBM) ESD protection on the bus pins.
What is the package type of MAX4895EETE+T?
- MAX4895EETE+T is available in a 16-pin TQFN package, which is suitable for space-constrained applications.
Can MAX4895EETE+T be used in harsh industrial environments?
- Yes, MAX4895EETE+T is designed to operate in harsh industrial environments with its robust features and wide temperature range.
What are the key advantages of using MAX4895EETE+T in technical solutions?
- The key advantages of using MAX4895EETE+T include high speed, low power consumption, robustness, and compatibility with various communication protocols.