Maxim Integrated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MAX6225BESA+
Näytä Yksityiskohdat DataSheets

MAX6225BESA+ - English Editing Encyclopedia Entry

Product Overview

Category

MAX6225BESA+ belongs to the category of voltage references.

Use

It is primarily used as a precision voltage reference in various electronic circuits.

Characteristics

  • High accuracy and stability
  • Low temperature coefficient
  • Low output noise
  • Wide operating temperature range

Package

The MAX6225BESA+ comes in a small surface-mount SOIC package.

Essence

This voltage reference is designed to provide a stable and accurate voltage output for use in analog and digital applications.

Packaging/Quantity

The MAX6225BESA+ is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Output Voltage: 2.5V
  • Initial Accuracy: ±0.02%
  • Temperature Coefficient: 10ppm/°C
  • Supply Voltage Range: 4.5V to 36V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6225BESA+ has the following pin configuration:

  1. VOUT: Output Voltage
  2. GND: Ground
  3. TRIM: Trim Input
  4. NC: No Connection
  5. IN+: Positive Supply Voltage
  6. IN-: Negative Supply Voltage

Functional Features

  • High precision and stability ensure accurate voltage output.
  • Low temperature coefficient minimizes voltage variations with temperature changes.
  • Low output noise ensures clean and reliable voltage reference.
  • Wide operating temperature range allows for use in various environments.

Advantages

  • Excellent accuracy and stability make it suitable for precision applications.
  • Low temperature coefficient ensures minimal voltage drift over temperature.
  • Low output noise makes it ideal for sensitive analog circuits.
  • Wide operating temperature range enables usage in extreme conditions.

Disadvantages

  • Limited output voltage options (only 2.5V in this case).
  • Relatively higher cost compared to standard voltage references.
  • Requires external trimming for precise voltage adjustment.

Working Principles

The MAX6225BESA+ utilizes a bandgap reference circuit to generate a stable and accurate voltage output. It compensates for temperature variations by employing a feedback mechanism that adjusts the voltage reference accordingly.

Detailed Application Field Plans

The MAX6225BESA+ finds applications in various fields, including:

  1. Precision measurement instruments
  2. Data acquisition systems
  3. Industrial control systems
  4. Medical equipment
  5. Communication devices

Detailed and Complete Alternative Models

  1. LT6654: Precision Voltage Reference with Adjustable Output
  2. REF102: Low-Drift, Low-Noise Precision Voltage Reference
  3. LM4040: Precision Micropower Shunt Voltage Reference
  4. ADR4550: Ultralow Noise XFET Voltage Reference

These alternative models offer similar functionality and can be considered as alternatives to the MAX6225BESA+.

In conclusion, the MAX6225BESA+ is a high-precision voltage reference with excellent stability and accuracy. Its low temperature coefficient and wide operating temperature range make it suitable for various applications. However, it has limited output voltage options and requires external trimming for precise adjustment. Alternative models are available for consideration based on specific requirements.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX6225BESA+ :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MAX6225BESA+ in technical solutions:

  1. Q: What is the MAX6225BESA+? A: The MAX6225BESA+ is a precision voltage reference IC manufactured by Maxim Integrated. It provides a stable and accurate voltage reference for various technical applications.

  2. Q: What is the voltage output range of the MAX6225BESA+? A: The MAX6225BESA+ has a voltage output range of 2.5V to 5.0V, which can be adjusted using external resistors.

  3. Q: What is the typical accuracy of the MAX6225BESA+? A: The typical accuracy of the MAX6225BESA+ is ±0.02% of the output voltage.

  4. Q: Can the MAX6225BESA+ operate from a single power supply? A: Yes, the MAX6225BESA+ can operate from a single power supply ranging from 4.5V to 12.6V.

  5. Q: What is the temperature coefficient of the MAX6225BESA+? A: The temperature coefficient of the MAX6225BESA+ is typically 5ppm/°C.

  6. Q: Is the MAX6225BESA+ suitable for low-power applications? A: Yes, the MAX6225BESA+ is designed for low-power operation, consuming only 60µA of current.

  7. Q: Can the MAX6225BESA+ drive capacitive loads? A: Yes, the MAX6225BESA+ can drive capacitive loads up to 100pF without any additional buffering.

  8. Q: Does the MAX6225BESA+ have built-in protection features? A: Yes, the MAX6225BESA+ includes built-in reverse-battery protection and current limiting.

  9. Q: What is the package type of the MAX6225BESA+? A: The MAX6225BESA+ is available in an 8-pin SOIC (Small Outline Integrated Circuit) package.

  10. Q: What are some common applications of the MAX6225BESA+? A: The MAX6225BESA+ is commonly used as a voltage reference in precision measurement instruments, data acquisition systems, industrial control systems, and other technical solutions requiring accurate voltage references.

Please note that these answers are general and may vary depending on specific use cases and requirements.