Maxim Integrated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MAX8664BEEP+T
Näytä Yksityiskohdat DataSheets

MAX8664BEEP+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-efficiency, Low-power, Step-down DC-DC Converter
  • Package: 16-pin TQFN (Thin Quad Flat No-Lead) package
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 1A
  • Efficiency: Up to 95%
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX8664BEEP+T has a total of 16 pins. The pin configuration is as follows:

  1. EN (Enable)
  2. FB (Feedback)
  3. GND (Ground)
  4. SW (Switch)
  5. SW (Switch)
  6. PG (Power Good)
  7. VOUT (Output Voltage)
  8. VOUT (Output Voltage)
  9. VOUT (Output Voltage)
  10. VOUT (Output Voltage)
  11. VOUT (Output Voltage)
  12. VOUT (Output Voltage)
  13. VOUT (Output Voltage)
  14. VOUT (Output Voltage)
  15. VIN (Input Voltage)
  16. VIN (Input Voltage)

Functional Features

  • High efficiency conversion of input voltage to output voltage.
  • Low power consumption in standby mode.
  • Overcurrent protection.
  • Thermal shutdown protection.
  • Soft-start feature for smooth power-up.

Advantages and Disadvantages

Advantages

  • High efficiency results in less power dissipation and longer battery life.
  • Wide input voltage range allows for versatile applications.
  • Small package size enables space-saving designs.
  • Overcurrent and thermal protection ensure safe operation.

Disadvantages

  • Limited maximum output current of 1A may not be suitable for high-power applications.
  • Operating temperature range of -40°C to +85°C may restrict usage in extreme environments.

Working Principles

The MAX8664BEEP+T is a step-down DC-DC converter that regulates the input voltage to a lower, stable output voltage. It utilizes a high-frequency switching technique to efficiently convert the power. The EN pin controls the enable/disable state of the converter, while the FB pin provides feedback to regulate the output voltage. The SW pin is connected to an external inductor and capacitor to form a low-pass filter, which smooths the output voltage. The PG pin indicates the status of the output voltage, signaling when it reaches the desired level.

Detailed Application Field Plans

The MAX8664BEEP+T is commonly used in various battery-powered devices, such as:

  1. Portable electronic devices (e.g., smartphones, tablets)
  2. Wearable devices (e.g., smartwatches, fitness trackers)
  3. IoT (Internet of Things) devices
  4. Wireless communication modules
  5. Industrial equipment

Its high efficiency and low power consumption make it ideal for applications where maximizing battery life is crucial.

Detailed and Complete Alternative Models

  1. MAX8664CEEP+T: Similar specifications, but with a different package (16-pin QSOP).
  2. MAX8664DEEP+T: Higher maximum output current of 2A, suitable for higher power applications.
  3. MAX8664EEEP+T: Lower input voltage range of 2.5V to 5.5V, suitable for specific applications.

These alternative models offer similar functionality with slight variations to cater to different requirements.

Word count: 443 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX8664BEEP+T :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MAX8664BEEP+T in technical solutions:

  1. Q: What is the MAX8664BEEP+T? A: The MAX8664BEEP+T is a high-efficiency, synchronous step-down DC-DC converter with an integrated power switch.

  2. Q: What is the input voltage range of the MAX8664BEEP+T? A: The input voltage range of the MAX8664BEEP+T is typically between 2.7V and 5.5V.

  3. Q: What is the output voltage range of the MAX8664BEEP+T? A: The output voltage range of the MAX8664BEEP+T can be adjusted from 0.6V to VIN.

  4. Q: What is the maximum output current of the MAX8664BEEP+T? A: The maximum output current of the MAX8664BEEP+T is typically 600mA.

  5. Q: Can the MAX8664BEEP+T operate in a low-power mode? A: Yes, the MAX8664BEEP+T has a low-power mode that reduces the quiescent current to minimize power consumption during light loads.

  6. Q: Does the MAX8664BEEP+T have built-in protection features? A: Yes, the MAX8664BEEP+T includes overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.

  7. Q: Can the MAX8664BEEP+T be used in battery-powered applications? A: Yes, the wide input voltage range and low-power mode make the MAX8664BEEP+T suitable for battery-powered devices.

  8. Q: Is the MAX8664BEEP+T easy to use in a circuit design? A: Yes, the MAX8664BEEP+T is designed for ease of use with minimal external components required for operation.

  9. Q: Can the MAX8664BEEP+T be used in automotive applications? A: Yes, the MAX8664BEEP+T is automotive-grade and can operate in harsh environments within specified temperature ranges.

  10. Q: Are there any evaluation boards or reference designs available for the MAX8664BEEP+T? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help users quickly prototype and implement the MAX8664BEEP+T in their applications.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.