Maxim Integrated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MAX8903GETI+T
Näytä Yksityiskohdat DataSheets

MAX8903GETI+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 24-Pin TQFN
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Maximum Output Current: 1.5A
  • Quiescent Current: 30µA
  • Switching Frequency: 2MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX8903GETI+T has a total of 24 pins. The pin configuration is as follows:

  1. EN (Enable)
  2. VIN (Input Voltage)
  3. GND (Ground)
  4. LX (Switch Node)
  5. BST (Boost Capacitor Connection)
  6. FB (Feedback Voltage)
  7. SS (Soft-Start)
  8. PGND (Power Ground)
  9. VOUT (Output Voltage)
  10. AGND (Analog Ground)
  11. COMP (Compensation)
  12. SS/TRK (Soft-Start/Tracking)
  13. PGOOD (Power Good Indicator)
  14. VDD (Digital Supply Voltage)
  15. CLK (Clock)
  16. SD (Shutdown)
  17. INTVCC (Internal Voltage)
  18. VREF (Reference Voltage)
  19. ISET (Current Limit Set)
  20. SYNC (Synchronization)
  21. MODE (Mode Selection)
  22. FREQ (Frequency Selection)
  23. VBIAS (Bias Voltage)
  24. VCC (Supply Voltage)

Functional Features

  • High efficiency voltage regulator for portable devices
  • Low power consumption for extended battery life
  • Integrated soft-start and tracking functions
  • Power good indicator for system monitoring
  • Synchronization capability for noise reduction
  • Multiple mode selection options for flexibility

Advantages and Disadvantages

Advantages: - High efficiency results in longer battery life - Low quiescent current reduces power consumption - Integrated features simplify design and reduce external components - Wide input and output voltage ranges provide versatility

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The MAX8903GETI+T is a voltage regulator IC that efficiently converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.6V and 3.6V. It achieves high efficiency by utilizing a synchronous buck-boost topology and operates at a switching frequency of 2MHz.

The IC incorporates various control and protection features such as soft-start, tracking, and power good indicator. These features ensure stable and reliable power delivery to the load while minimizing startup transients and providing system monitoring capabilities.

Detailed Application Field Plans

The MAX8903GETI+T is widely used in portable electronic devices such as smartphones, tablets, and wearable devices. Its compact package and low power consumption make it suitable for space-constrained and battery-powered applications. The voltage regulator provides a stable power supply to the device's core components, ensuring proper functionality and performance.

Detailed and Complete Alternative Models

  1. MAX8902AETI+: Similar specifications and features, but with a different pin configuration.
  2. MAX8904GETI+: Higher maximum output current of 2A, suitable for higher power applications.
  3. MAX8905AETI+: Lower quiescent current of 10µA, further reducing power consumption.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 410 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX8903GETI+T :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MAX8903GETI+T in technical solutions:

  1. Q: What is the MAX8903GETI+T? A: The MAX8903GETI+T is a highly integrated power management IC (PMIC) designed for use in portable devices.

  2. Q: What are the key features of the MAX8903GETI+T? A: The key features include multiple voltage regulators, battery charger, power switches, and a fuel gauge interface.

  3. Q: Can the MAX8903GETI+T support multiple voltage outputs? A: Yes, it can support up to six different voltage outputs, making it suitable for various components in a system.

  4. Q: Does the MAX8903GETI+T have built-in protection features? A: Yes, it includes overvoltage protection, undervoltage lockout, thermal shutdown, and short-circuit protection.

  5. Q: Can the MAX8903GETI+T charge different types of batteries? A: Yes, it supports charging lithium-ion (Li+) and lithium-polymer (Li-Po) batteries with programmable charging parameters.

  6. Q: Is the MAX8903GETI+T compatible with low-power sleep modes? A: Yes, it has a low quiescent current mode that allows efficient operation during sleep or standby states.

  7. Q: How does the MAX8903GETI+T handle power sequencing? A: It provides flexible power-up and power-down sequencing options to ensure proper operation of system components.

  8. Q: Can the MAX8903GETI+T communicate with a microcontroller or host processor? A: Yes, it offers an I2C interface for communication, allowing control and monitoring of various functions.

  9. Q: What is the maximum input voltage supported by the MAX8903GETI+T? A: The maximum input voltage is 6.5V, making it suitable for a wide range of power sources.

  10. Q: Is the MAX8903GETI+T RoHS compliant? A: Yes, it is designed to meet the requirements of the Restriction of Hazardous Substances (RoHS) directive.

Please note that these answers are general and may vary depending on the specific application and implementation of the MAX8903GETI+T in a technical solution.