Maxim Integrated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MAX9240AGTM/V+T
Näytä Yksityiskohdat DataSheets

MAX9240AGTM/V+T

Introduction

The MAX9240AGTM/V+T is a high-speed, low-power quad deserializer designed for automotive applications. This device belongs to the category of integrated circuits and is commonly used in automotive camera systems for transmitting video data over a single coaxial cable. The MAX9240AGTM/V+T offers several characteristics such as high-speed data transmission, low power consumption, small package size, and robustness suitable for automotive environments.

Basic Information Overview

  • Category: Integrated Circuits
  • Use: Automotive Camera Systems
  • Characteristics: High-speed data transmission, Low power consumption, Small package size, Robustness for automotive environments
  • Package: 56-Pin TQFN (7mm x 7mm)
  • Essence: Quad Deserializer
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Data Rate: Up to 1Gbps per channel
  • Operating Voltage: 1.71V to 2.625V
  • Operating Temperature Range: -40°C to +105°C
  • Power Consumption: 100mW per channel
  • Input/Output Interface: LVDS

Detailed Pin Configuration

The MAX9240AGTM/V+T features a 56-pin TQFN package with the following pin configuration: 1. VIN1P / VIN1N 2. VIN2P / VIN2N 3. VIN3P / VIN3N 4. VIN4P / VIN4N 5. GND 6. VCC 7. MODE 8. SCL 9. SDA 10. ...

(Continues with detailed pin descriptions for all 56 pins)

Functional Features

  • Quad-channel deserializer
  • Programmable I2C interface for configuration
  • Spread spectrum tolerance
  • Coax cable equalization
  • Short-to-battery and short-to-ground protection

Advantages and Disadvantages

Advantages

  • High-speed data transmission
  • Low power consumption
  • Robustness for automotive environments
  • Programmable interface for flexible configuration

Disadvantages

  • Higher cost compared to lower-speed alternatives
  • Requires LVDS interface support in the system

Working Principles

The MAX9240AGTM/V+T receives high-speed serialized video data from up to four cameras over a single coaxial cable. It then deserializes this data and outputs it in parallel format for further processing by the host system. The device incorporates equalization and spread spectrum tolerance to ensure reliable data transmission in noisy automotive environments.

Detailed Application Field Plans

The MAX9240AGTM/V+T is primarily used in automotive camera systems for applications such as surround-view parking assistance, blind-spot detection, and rear-view cameras. Its high-speed data transmission capability and robustness make it suitable for demanding automotive environments.

Detailed and Complete Alternative Models

  • MAX9271: Single-channel deserializer
  • MAX9286: Quad-channel deserializer with HDCP support
  • DS90UB913A-Q1: Quad-channel FPD-Link III deserializer

In conclusion, the MAX9240AGTM/V+T is a high-speed, low-power quad deserializer designed for automotive camera systems. Its robustness, high-speed data transmission, and programmable interface make it an ideal choice for demanding automotive applications.

(Word count: 550)

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX9240AGTM/V+T :n soveltamiseen teknisissä ratkaisuissa

  1. Question: What is the maximum data rate supported by MAX9240AGTM/V+T?
    Answer: The MAX9240AGTM/V+T supports a maximum data rate of 1Gbps.

  2. Question: Can MAX9240AGTM/V+T be used in automotive camera applications?
    Answer: Yes, MAX9240AGTM/V+T is suitable for automotive camera applications due to its robust EMI performance and high bandwidth.

  3. Question: What is the typical power consumption of MAX9240AGTM/V+T?
    Answer: The typical power consumption of MAX9240AGTM/V+T is 100mW per channel.

  4. Question: Does MAX9240AGTM/V+T support long cable runs in automotive systems?
    Answer: Yes, MAX9240AGTM/V+T is designed to support long cable runs, making it ideal for automotive systems.

  5. Question: What is the operating voltage range of MAX9240AGTM/V+T?
    Answer: MAX9240AGTM/V+T operates within a voltage range of 3.3V to 1.8V.

  6. Question: Can MAX9240AGTM/V+T be used in multi-camera systems?
    Answer: Yes, MAX9240AGTM/V+T can be used in multi-camera systems, providing synchronized data transmission.

  7. Question: What is the temperature range for MAX9240AGTM/V+T?
    Answer: MAX9240AGTM/V+T has a temperature range of -40°C to +105°C, making it suitable for harsh environments.

  8. Question: Does MAX9240AGTM/V+T support spread spectrum clocking?
    Answer: Yes, MAX9240AGTM/V+T supports spread spectrum clocking for reduced EMI.

  9. Question: Is MAX9240AGTM/V+T compatible with MIPI CSI-2 interface?
    Answer: Yes, MAX9240AGTM/V+T is compatible with MIPI CSI-2 interface, enabling seamless integration with existing systems.

  10. Question: Can MAX9240AGTM/V+T be used in industrial vision systems?
    Answer: Yes, MAX9240AGTM/V+T is well-suited for industrial vision systems, offering high-speed data transmission and reliability.