Maxim Integrated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MAX9248GCM/V+
Näytä Yksityiskohdat DataSheets

MAX9248GCM/V+ - English Editing Encyclopedia Entry

Product Overview

Category

The MAX9248GCM/V+ belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in automotive applications for high-speed video data transmission.

Characteristics

  • High-speed data transmission
  • Low power consumption
  • Robust and reliable performance
  • Compact package size

Package

The MAX9248GCM/V+ is available in a small form factor package, typically a 48-pin LQFP (Quad Flat Package).

Essence

The essence of the MAX9248GCM/V+ lies in its ability to transmit high-quality video data efficiently and reliably in automotive systems.

Packaging/Quantity

The MAX9248GCM/V+ is usually packaged in reels or tubes, with a typical quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 3.3V
  • Data Rate: Up to 1.5 Gbps
  • Operating Temperature Range: -40°C to +125°C
  • Input/Output Interface: LVDS (Low-Voltage Differential Signaling)
  • Package Type: 48-pin LQFP

Detailed Pin Configuration

The MAX9248GCM/V+ has a total of 48 pins. The pin configuration is as follows:

  1. VCC
  2. GND
  3. NC
  4. NC
  5. NC
  6. NC
  7. NC
  8. NC
  9. NC
  10. NC
  11. NC
  12. NC
  13. NC
  14. NC
  15. NC
  16. NC
  17. NC
  18. NC
  19. NC
  20. NC
  21. NC
  22. NC
  23. NC
  24. NC
  25. NC
  26. NC
  27. NC
  28. NC
  29. NC
  30. NC
  31. NC
  32. NC
  33. NC
  34. NC
  35. NC
  36. NC
  37. NC
  38. NC
  39. NC
  40. NC
  41. NC
  42. NC
  43. NC
  44. NC
  45. NC
  46. NC
  47. NC
  48. NC

Functional Features

The MAX9248GCM/V+ offers the following functional features:

  • High-speed LVDS data transmission
  • Built-in error detection and correction mechanisms
  • Support for multiple video channels
  • Low power consumption for automotive applications
  • Robust EMI (Electromagnetic Interference) performance

Advantages and Disadvantages

Advantages

  • High-speed data transmission capability
  • Reliable performance in automotive environments
  • Compact package size for space-constrained applications
  • Low power consumption for energy efficiency

Disadvantages

  • Limited pin configuration options
  • Relatively high cost compared to some alternative models

Working Principles

The MAX9248GCM/V+ operates based on the principles of LVDS signaling. It receives video data from a source and transmits it at high speeds using differential signaling techniques. The IC incorporates error detection and correction mechanisms to ensure reliable data transmission.

Detailed Application Field Plans

The MAX9248GCM/V+ is primarily designed for use in automotive applications, including but not limited to:

  1. In-vehicle infotainment systems
  2. Advanced driver assistance systems (ADAS)
  3. Rearview cameras
  4. Surround-view systems
  5. Automotive displays

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the MAX9248GCM/V+ include:

  1. MAX9272GTM/V+: Similar functionality with additional features such as HDCP encryption support.
  2. DS90UB954-Q1: A comparable IC with enhanced EMI performance and wider operating temperature range.
  3. LT8918H: Offers similar high-speed data transmission capabilities with additional support for HDMI interfaces.

In conclusion, the MAX9248GCM/V+ is a high-performance integrated circuit designed for automotive video data transmission applications. Its compact size, low power consumption, and robust performance make it an ideal choice for various automotive systems.

Word Count: 530

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX9248GCM/V+ :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum data rate supported by MAX9248GCM/V+?
    - The maximum data rate supported by MAX9248GCM/V+ is 3.12Gbps.

  2. Can MAX9248GCM/V+ be used in automotive applications?
    - Yes, MAX9248GCM/V+ is designed for automotive applications and is AEC-Q100 qualified.

  3. What is the typical power supply voltage range for MAX9248GCM/V+?
    - The typical power supply voltage range for MAX9248GCM/V+ is 3.3V to 5V.

  4. Does MAX9248GCM/V+ support spread spectrum clocking?
    - Yes, MAX9248GCM/V+ supports spread spectrum clocking for reduced EMI.

  5. What is the operating temperature range of MAX9248GCM/V+?
    - The operating temperature range of MAX9248GCM/V+ is -40°C to +105°C.

  6. Can MAX9248GCM/V+ be used for high-speed serial data transmission?
    - Yes, MAX9248GCM/V+ is suitable for high-speed serial data transmission up to 3.12Gbps.

  7. Does MAX9248GCM/V+ support HDCP content protection?
    - No, MAX9248GCM/V+ does not support HDCP content protection.

  8. What is the recommended interface for connecting MAX9248GCM/V+ to a microcontroller?
    - The recommended interface for connecting MAX9248GCM/V+ to a microcontroller is LVDS.

  9. Is MAX9248GCM/V+ compatible with other Maxim Integrated products for camera and display applications?
    - Yes, MAX9248GCM/V+ is compatible with other Maxim Integrated products for camera and display applications.

  10. Can MAX9248GCM/V+ be used in multi-camera systems?
    - Yes, MAX9248GCM/V+ can be used in multi-camera systems with appropriate interfacing and synchronization.