Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MAX9718HEBL+TG45

MAX9718HEBL+TG45

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Audio Amplifier
  • Characteristics: High Efficiency, Low Noise, Small Package Size
  • Package: HEBL+TG45
  • Essence: Power Amplification
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 28V
  • Output Power: 2.8W (into 4Ω load) at 5V supply voltage
  • Total Harmonic Distortion + Noise (THD+N): 0.1% (typical)
  • Shutdown Current: 0.01μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX9718HEBL+TG45 has the following pin configuration:

  1. VDD - Power Supply
  2. GND - Ground
  3. SHDN - Shutdown Control
  4. IN+ - Positive Input
  5. IN- - Negative Input
  6. OUT - Amplified Output

Functional Features

  • High Efficiency: The MAX9718HEBL+TG45 utilizes a Class D amplifier architecture, resulting in high efficiency and low power consumption.
  • Low Noise: The integrated circuit incorporates advanced noise reduction techniques, ensuring minimal audio distortion and interference.
  • Small Package Size: The HEBL+TG45 package is compact, making it suitable for space-constrained applications.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Low noise ensures high-quality audio output. - Small package size allows for easy integration into various devices.

Disadvantages: - Limited output power compared to larger amplifiers. - Requires an external power supply.

Working Principles

The MAX9718HEBL+TG45 is a Class D audio amplifier that operates by rapidly switching the output stage between two states: on and off. This switching action minimizes power dissipation, resulting in high efficiency. The input audio signal is modulated onto a carrier waveform, which is then amplified and filtered to produce the final audio output.

Detailed Application Field Plans

The MAX9718HEBL+TG45 is suitable for various audio amplification applications, including but not limited to: - Portable speakers - Headphone amplifiers - Automotive audio systems - Home theater systems - Gaming consoles

Detailed and Complete Alternative Models

  1. MAX9717HEBL+TG45: Similar to MAX9718HEBL+TG45, but with lower output power.
  2. MAX9720HEBL+TG45: Higher output power version of MAX9718HEBL+TG45.
  3. MAX98357AETE+T: Class D audio amplifier with integrated digital audio interface.

Note: This is not an exhaustive list, and there are several alternative models available from different manufacturers.

Word count: 273

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX9718HEBL+TG45 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MAX9718HEBL+TG45 in technical solutions:

  1. Q: What is the MAX9718HEBL+TG45? A: The MAX9718HEBL+TG45 is a high-efficiency, mono Class D audio amplifier IC.

  2. Q: What is the maximum output power of the MAX9718HEBL+TG45? A: The MAX9718HEBL+TG45 can deliver up to 12W of continuous output power into an 8-ohm load.

  3. Q: What is the input voltage range for the MAX9718HEBL+TG45? A: The MAX9718HEBL+TG45 has an input voltage range of 2.7V to 5.5V.

  4. Q: Can the MAX9718HEBL+TG45 be used in battery-powered applications? A: Yes, the low operating voltage range makes it suitable for battery-powered applications.

  5. Q: Does the MAX9718HEBL+TG45 require external components for operation? A: Yes, it requires a few external components such as capacitors, resistors, and an inductor.

  6. Q: What is the efficiency of the MAX9718HEBL+TG45? A: The MAX9718HEBL+TG45 has a high efficiency of up to 87% at full power.

  7. Q: Can the MAX9718HEBL+TG45 drive speakers with different impedance ratings? A: Yes, the MAX9718HEBL+TG45 can drive speakers with impedance ranging from 4 ohms to 8 ohms.

  8. Q: Does the MAX9718HEBL+TG45 have built-in thermal protection? A: Yes, it has built-in thermal shutdown protection to prevent overheating.

  9. Q: Can the MAX9718HEBL+TG45 be used in automotive audio systems? A: Yes, it is suitable for automotive applications as it can operate over a wide temperature range.

  10. Q: What are some typical applications of the MAX9718HEBL+TG45? A: The MAX9718HEBL+TG45 can be used in portable speakers, gaming consoles, multimedia devices, and other audio playback systems.

Please note that these answers are general and may vary depending on specific design considerations and requirements.