Maxim Integrated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MAX9762ETI+
Näytä Yksityiskohdat DataSheets

MAX9762ETI+

Introduction

The MAX9762ETI+ belongs to the category of audio amplifiers and is commonly used in audio applications such as portable speakers, home entertainment systems, and automotive audio systems. This integrated circuit amplifier is known for its high performance and compact package, making it suitable for various audio amplification needs.

Basic Information Overview

  • Category: Audio Amplifier IC
  • Use: Audio amplification in portable speakers, home entertainment systems, automotive audio systems
  • Characteristics: High performance, compact package
  • Package: 28-pin TQFN (Thin Quad Flat No-Lead)
  • Essence: Efficient audio amplification
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Power Supply Voltage: 2.7V to 5.5V
  • Output Power: Up to 3.2W per channel
  • Total Harmonic Distortion + Noise (THD+N): 0.15% at 1kHz, 1.6W into 4Ω
  • Signal-to-Noise Ratio (SNR): 96dB at 1kHz, 1.6W into 4Ω
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX9762ETI+ features a detailed pin configuration with specific functions assigned to each pin, facilitating easy integration into audio amplifier circuits.

Functional Features

  • Integrated DirectDrive® headphone amplifier
  • Automatic level control (ALC) for speaker protection
  • Low quiescent current consumption
  • Thermal and short-circuit protection

Advantages and Disadvantages

Advantages: - High output power capability - Compact package for space-constrained designs - Integrated headphone amplifier for versatile audio applications

Disadvantages: - Limited output power compared to higher wattage amplifiers - May require additional heat dissipation in high-power applications

Working Principles

The MAX9762ETI+ operates by amplifying the input audio signal and delivering it to the connected speakers or headphones. The integrated ALC ensures that the output remains within safe levels, protecting the speakers from damage due to excessive power.

Detailed Application Field Plans

  • Portable Speakers: The MAX9762ETI+ can be integrated into compact portable speaker designs, providing efficient audio amplification for on-the-go use.
  • Home Entertainment Systems: It can be utilized in home audio setups to drive speakers and deliver high-quality sound output.
  • Automotive Audio Systems: The amplifier can enhance the audio experience in vehicles by powering the audio system with its high-performance capabilities.

Detailed and Complete Alternative Models

  • MAX9763: Similar performance with additional features
  • MAX98357A: Higher output power with similar form factor
  • TPA3116D2: Alternative audio amplifier IC with comparable specifications

In conclusion, the MAX9762ETI+ offers a balance of performance and size, making it an ideal choice for various audio amplification applications.

Word Count: 443

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MAX9762ETI+ :n soveltamiseen teknisissä ratkaisuissa

  1. What is the MAX9762ETI+?

    • The MAX9762ETI+ is a high-power, mono Class D amplifier with integrated volume control and automatic gain control (AGC).

  2. What is the maximum output power of the MAX9762ETI+?

    • The MAX9762ETI+ can deliver up to 20W into an 8Ω load or 32W into a 4Ω load.

  3. What is the input voltage range for the MAX9762ETI+?

    • The input voltage range for the MAX9762ETI+ is typically between 4.5V and 14V.

  4. Does the MAX9762ETI+ require external heat sinking?

    • No, the MAX9762ETI+ does not require external heat sinking due to its high efficiency and thermal protection features.

  5. Can the MAX9762ETI+ be used in automotive applications?

    • Yes, the MAX9762ETI+ is suitable for automotive applications, as it can operate over a wide supply voltage range and has built-in short-circuit and thermal protection.

  6. What are the key features of the MAX9762ETI+?

    • The key features of the MAX9762ETI+ include integrated volume control, AGC, low quiescent current, and high efficiency.

  7. How is the MAX9762ETI+ controlled?

    • The MAX9762ETI+ can be controlled using a simple I2C interface for setting volume levels and configuring AGC parameters.

  8. What are the typical applications for the MAX9762ETI+?

    • Typical applications for the MAX9762ETI+ include portable speakers, gaming systems, and multimedia monitors.

  9. Does the MAX9762ETI+ support stereo output?

    • No, the MAX9762ETI+ is a mono amplifier and does not support stereo output without additional circuitry.

  10. What are the recommended external components for using the MAX9762ETI+?

    • The recommended external components for the MAX9762ETI+ include input and output capacitors, as well as resistors for setting the gain and AGC parameters.