Melexis Technologies NV
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MLX90333EDC-BCH-100-SP
Näytä Yksityiskohdat DataSheets

MLX90333EDC-BCH-100-SP

Product Overview

The MLX90333EDC-BCH-100-SP belongs to the category of magnetic position sensors. It is commonly used for measuring the angular or linear position of a magnetic field. The sensor possesses characteristics such as high accuracy, low power consumption, and robust packaging. It is typically available in small surface-mount packages and is essential for applications requiring precise position sensing. The sensor is usually supplied in tape and reel packaging with a specific quantity per reel.

Specifications

  • Operating Voltage: 2.2V to 5.5V
  • Output Interface: Analog/PWM
  • Operating Temperature Range: -40°C to 150°C
  • Resolution: 12-bit
  • Package Type: DFN-10

Detailed Pin Configuration

The MLX90333EDC-BCH-100-SP features a 10-pin Dual Flat No-Lead (DFN) package with the following pin configuration: 1. VDD 2. GND 3. VOUT 4. PWM/SDO 5. SCL/SDA 6. ADDR 7. MODE 8. TEST 9. NC 10. NC

Functional Features

  • High Accuracy Position Sensing
  • Low Power Consumption
  • Digital Output Interface
  • Integrated Temperature Sensor
  • Programmable Resolution

Advantages and Disadvantages

Advantages

  • High Accuracy
  • Wide Operating Voltage Range
  • Small Package Size
  • Integrated Temperature Sensor
  • Flexible Output Interface

Disadvantages

  • Limited Maximum Operating Temperature
  • Requires External Pull-Up Resistors for I2C Interface

Working Principles

The MLX90333EDC-BCH-100-SP operates based on the Hall Effect, where it detects changes in the magnetic field to determine the position of a magnet. The sensor utilizes an integrated analog front-end and digital signal processing to provide accurate position information.

Detailed Application Field Plans

The MLX90333EDC-BCH-100-SP is widely used in various applications, including: - Automotive: Throttle position sensing, pedal position sensing - Industrial: Linear actuator position feedback, rotary encoder - Consumer Electronics: Joystick position sensing, gaming controllers

Detailed and Complete Alternative Models

Some alternative models to the MLX90333EDC-BCH-100-SP include: - MLX90393 - MLX90364 - MLX90374

In conclusion, the MLX90333EDC-BCH-100-SP is a versatile magnetic position sensor with high accuracy and low power consumption, making it suitable for a wide range of applications.

[Word Count: 346]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MLX90333EDC-BCH-100-SP :n soveltamiseen teknisissä ratkaisuissa

  1. What is MLX90333EDC-BCH-100-SP?

    • MLX90333EDC-BCH-100-SP is a high-accuracy 3D Hall sensor designed for technical solutions requiring precise magnetic field measurements.

  2. What are the key features of MLX90333EDC-BCH-100-SP?

    • The key features include 3D magnetic field measurement, high accuracy, digital output, and programmable resolution.

  3. How is MLX90333EDC-BCH-100-SP typically used in technical solutions?

    • It is commonly used in applications such as joystick controllers, rotary position sensors, and non-contact potentiometers.

  4. What is the operating voltage range of MLX90333EDC-BCH-100-SP?

    • The operating voltage range is typically between 2.2V and 5.5V.

  5. Can MLX90333EDC-BCH-100-SP be used in automotive applications?

    • Yes, it is suitable for automotive applications due to its robustness and reliability.

  6. What is the output interface of MLX90333EDC-BCH-100-SP?

    • It features a digital output interface, making it compatible with microcontrollers and digital signal processing units.

  7. Is MLX90333EDC-BCH-100-SP sensitive to external magnetic interference?

    • It has built-in compensation mechanisms to minimize the impact of external magnetic interference.

  8. Can MLX90333EDC-BCH-100-SP be calibrated for specific application requirements?

    • Yes, it offers programmable resolution and calibration options to tailor its performance to specific application needs.

  9. What are the typical communication protocols supported by MLX90333EDC-BCH-100-SP?

    • It supports standard I2C and SPI communication protocols for interfacing with microcontrollers and other devices.

  10. Are there any known limitations or considerations when using MLX90333EDC-BCH-100-SP in technical solutions?

    • Users should consider factors such as temperature effects, magnetic field range, and power consumption when integrating this sensor into their designs.