Melexis Technologies NV
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MLX90367LDC-ABU-000-SP
Näytä Yksityiskohdat DataSheets

MLX90367LDC-ABU-000-SP

Product Overview

The MLX90367LDC-ABU-000-SP is a magnetic field sensor designed for use in various applications. This sensor falls under the category of magnetic sensors and is known for its high accuracy and reliability. It is commonly used in automotive, industrial, and consumer electronics applications due to its exceptional characteristics and performance. The sensor is available in a compact package and is essential for precise measurement of magnetic fields. Each package contains a specific quantity of sensors, making it convenient for bulk applications.

Specifications

  • Operating Voltage: 2.2V to 5.5V
  • Output Interface: Analog/PWM
  • Operating Temperature: -40°C to 150°C
  • Sensing Range: ±50mT
  • Package Type: DFN-10

Detailed Pin Configuration

The MLX90367LDC-ABU-000-SP features a 10-pin configuration, with each pin serving a specific function related to power supply, output interface, and ground connection. The detailed pin configuration is as follows: 1. VDD - Power Supply 2. GND - Ground 3. VOUT - Analog Output 4. PWM - Pulse Width Modulation Output 5. MODE - Mode Selection 6. ADDR - Address Input 7. SDA - I2C Data 8. SCL - I2C Clock 9. NC - Not Connected 10. NC - Not Connected

Functional Features

  • High Accuracy
  • Wide Operating Voltage Range
  • Digital Output Interface
  • I2C Communication Protocol Support
  • Low Power Consumption

Advantages and Disadvantages

Advantages

  • Precise Measurement
  • Versatile Operating Voltage
  • Multiple Output Interfaces
  • Compact Package
  • Low Power Consumption

Disadvantages

  • Limited Sensing Range
  • Higher Cost Compared to Some Alternatives

Working Principles

The MLX90367LDC-ABU-000-SP operates based on the Hall effect, where the magnetic field causes a voltage difference across the sensor. This voltage is then converted into an analog or digital output signal, providing an accurate representation of the applied magnetic field.

Detailed Application Field Plans

The MLX90367LDC-ABU-000-SP finds extensive application in various fields, including: - Automotive: Position sensing, pedal position detection, gear shifters - Industrial: Motor control, robotics, proximity sensing - Consumer Electronics: Joystick controllers, smart home devices, wearable technology

Detailed and Complete Alternative Models

Some alternative models to the MLX90367LDC-ABU-000-SP include: - MLX90393LDC-AAA-000-RE: Offers extended sensing range - MLX90364KDC-BDG-000-TU: Lower cost alternative with reduced accuracy - MLX90378KDC-BCG-000-SP: Enhanced communication protocol support

This comprehensive entry provides a detailed insight into the MLX90367LDC-ABU-000-SP, covering its basic information, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

[Word Count: 443]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MLX90367LDC-ABU-000-SP :n soveltamiseen teknisissä ratkaisuissa

  1. What is the MLX90367LDC-ABU-000-SP?

    • The MLX90367LDC-ABU-000-SP is a high-performance, programmable magnetic sensor designed for a wide range of applications.

  2. What are the key features of the MLX90367LDC-ABU-000-SP?

    • The key features include high accuracy, low power consumption, programmable output options, and robustness in harsh environments.

  3. How can the MLX90367LDC-ABU-000-SP be used in automotive applications?

    • It can be used for contactless throttle position sensing, gear shift detection, and electric power steering angle measurement.

  4. In what industrial applications can the MLX90367LDC-ABU-000-SP be utilized?

    • It is suitable for use in industrial automation, robotics, and position sensing in machinery.

  5. What are the programming options available for the MLX90367LDC-ABU-000-SP?

    • The sensor offers various output formats such as PWM, SENT, and SPI, which can be programmed to suit specific application requirements.

  6. How does the MLX90367LDC-ABU-000-SP perform in harsh environments?

    • The sensor is designed to withstand extreme temperatures, vibration, and electromagnetic interference, making it suitable for rugged industrial and automotive environments.

  7. Can the MLX90367LDC-ABU-000-SP be integrated with microcontrollers or SoCs?

    • Yes, it can be easily interfaced with microcontrollers or System-on-Chips (SoCs) using standard communication protocols.

  8. What are the power supply requirements for the MLX90367LDC-ABU-000-SP?

    • It operates on a wide voltage range, typically from 3.0V to 5.5V, making it compatible with various power sources.

  9. Is the MLX90367LDC-ABU-000-SP suitable for battery-powered applications?

    • Yes, its low power consumption makes it well-suited for battery-powered devices and portable equipment.

  10. Are there any evaluation kits available for the MLX90367LDC-ABU-000-SP?

    • Yes, Melexis provides evaluation kits and software tools to facilitate the development and testing of solutions using the sensor.