Micro Commercial Co
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
15KP170CA-TP
Näytä Yksityiskohdat DataSheets

15KP170CA-TP Product Overview

Introduction

The 15KP170CA-TP is a high-performance transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides a comprehensive overview of the 15KP170CA-TP, including its product details, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage transients induced by lightning and other transient voltage events
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: Through-hole
  • Essence: Provides robust protection for sensitive electronic equipment
  • Packaging/Quantity: Available in various packaging options, typically supplied in reels or tubes

Specifications

  • Peak Pulse Power: 15000 W
  • Standoff Voltage: 144 V
  • Breakdown Voltage: 160 V
  • Clamping Voltage: 231 V
  • Maximum Reverse Leakage Current: 1 µA
  • Operating Temperature Range: -55°C to +175°C
  • Package Type: DO-201AD

Detailed Pin Configuration

The 15KP170CA-TP TVS diode has a standard DO-201AD package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Robust surge protection
  • Fast response time
  • Low clamping voltage
  • High surge capability
  • Reliable performance under transient voltage events

Advantages and Disadvantages

Advantages

  • Provides effective protection against voltage transients
  • Fast response time ensures minimal impact on protected circuits
  • High surge capability for enhanced reliability
  • Wide operating temperature range

Disadvantages

  • Higher clamping voltage compared to some alternative models
  • Limited to specific voltage ratings

Working Principles

The 15KP170CA-TP operates based on the principle of avalanche breakdown. When a transient voltage event occurs, the diode rapidly conducts and clamps the voltage to a safe level, protecting downstream circuitry from damage.

Detailed Application Field Plans

The 15KP170CA-TP is widely used in various applications requiring robust transient voltage protection, including: - Power supplies - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the 15KP170CA-TP include: - 15KP160CA-TP - 15KP180CA-TP - 15KP200CA-TP - 15KP220CA-TP

These alternative models offer varying standoff voltages and clamping voltages to suit different application requirements.

In conclusion, the 15KP170CA-TP transient voltage suppressor diode offers robust protection against voltage transients and finds widespread use in diverse electronic applications. Its high surge capability, fast response time, and reliable performance make it a preferred choice for safeguarding sensitive electronic equipment.

[Word Count: 443]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 15KP170CA-TP :n soveltamiseen teknisissä ratkaisuissa

Sure, here are 10 common questions and answers related to the application of 15KP170CA-TP in technical solutions:

  1. What is the maximum peak pulse power of 15KP170CA-TP?

    • The maximum peak pulse power is 15000W for 10/1000μs waveform.

  2. What is the breakdown voltage of 15KP170CA-TP?

    • The breakdown voltage is typically 170V.

  3. What are the typical applications of 15KP170CA-TP?

    • It is commonly used in surge protection for sensitive electronics, such as in power supplies, industrial equipment, and telecommunications systems.

  4. What is the clamping voltage of 15KP170CA-TP?

    • The clamping voltage is typically 275V at 100A.

  5. Is 15KP170CA-TP suitable for overvoltage protection in automotive applications?

    • Yes, it can be used for overvoltage protection in automotive electronics and electrical systems.

  6. What is the response time of 15KP170CA-TP?

    • The response time is very fast, typically less than 1 picosecond.

  7. Can 15KP170CA-TP be used in high-speed data communication systems?

    • Yes, it is suitable for protecting high-speed data lines and communication equipment from transient voltage events.

  8. Does 15KP170CA-TP meet industry standards for surge protection devices?

    • Yes, it complies with industry standards such as IEC 61000-4-5 for surge immunity testing.

  9. What is the operating temperature range of 15KP170CA-TP?

    • The operating temperature range is -55°C to +175°C, making it suitable for a wide range of environments.

  10. Can 15KP170CA-TP be used in conjunction with other surge protection components?

    • Yes, it can be used in combination with varistors, gas discharge tubes, and other protective devices to provide comprehensive surge protection for complex systems.

I hope these questions and answers are helpful for your technical solutions! If you need further information, feel free to ask.