1N5225B-TP
Product Overview
Category
The 1N5225B-TP belongs to the category of Zener diodes.
Use
It is commonly used for voltage regulation and protection in electronic circuits.
Characteristics
- Zener voltage: 3.3V
- Power dissipation: 500mW
- Package type: DO-35
- Operating temperature range: -65°C to +200°C
- Reverse leakage current: 5μA
Packaging/Quantity
The 1N5225B-TP is typically available in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Zener voltage: 3.3V
- Power dissipation: 500mW
- Maximum forward voltage: 1.2V
- Maximum reverse current: 5μA
- Operating temperature range: -65°C to +200°C
Detailed Pin Configuration
The 1N5225B-TP has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.
Functional Features
- Voltage regulation: The 1N5225B-TP maintains a constant output voltage even when there are fluctuations in the input voltage.
- Overvoltage protection: It prevents damage to sensitive components by diverting excess voltage away from the circuit.
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- Compact size
- Wide operating temperature range
Disadvantages
- Limited power dissipation capability
- Susceptible to thermal runaway if not properly heatsinked
Working Principles
The 1N5225B-TP operates based on the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased at the specified Zener voltage.
Detailed Application Field Plans
The 1N5225B-TP is widely used in: - Voltage regulators - Power supplies - Overvoltage protection circuits - Signal clamping circuits
Detailed and Complete Alternative Models
Some alternative models to the 1N5225B-TP include: - 1N5221B-TP (2.4V Zener voltage) - 1N5229B-TP (4.7V Zener voltage) - BZX84C3V3 (3.3V Zener voltage)
In conclusion, the 1N5225B-TP Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its compact size and wide operating temperature range make it suitable for various applications in electronics.
Word count: 366
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 1N5225B-TP :n soveltamiseen teknisissä ratkaisuissa
What is the 1N5225B-TP diode used for?
- The 1N5225B-TP diode is commonly used as a voltage regulator in various technical solutions.
What is the maximum forward current rating of the 1N5225B-TP diode?
- The maximum forward current rating of the 1N5225B-TP diode is typically around 500 mA.
What is the voltage rating of the 1N5225B-TP diode?
- The 1N5225B-TP diode has a voltage rating of 3.3 volts.
Can the 1N5225B-TP diode be used for reverse voltage protection?
- Yes, the 1N5225B-TP diode can be used for reverse voltage protection due to its characteristics.
What are the typical applications of the 1N5225B-TP diode?
- Typical applications include voltage regulation, overvoltage protection, and signal clamping in electronic circuits.
Is the 1N5225B-TP diode suitable for low power applications?
- Yes, the 1N5225B-TP diode is suitable for low power applications due to its relatively low forward current rating.
What is the temperature range for the 1N5225B-TP diode?
- The 1N5225B-TP diode typically operates within a temperature range of -65°C to +200°C.
Can the 1N5225B-TP diode be used in automotive electronics?
- Yes, the 1N5225B-TP diode can be used in automotive electronics due to its temperature range and voltage regulation capabilities.
Does the 1N5225B-TP diode require a heat sink for certain applications?
- In high-power applications, it may be necessary to use a heat sink with the 1N5225B-TP diode to dissipate heat effectively.
Are there any common failure modes associated with the 1N5225B-TP diode?
- Common failure modes include thermal runaway under high current conditions and voltage breakdown under reverse bias, so proper design considerations are important.