Micro Commercial Co
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
P6KE27A-TP
Näytä Yksityiskohdat DataSheets

P6KE27A-TP: Product Overview and Detailed Information

Introduction

The P6KE27A-TP belongs to the category of transient voltage suppressor diodes. These diodes are used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge. The P6KE27A-TP is designed to clamp voltage surges and divert excess current away from sensitive circuits, thereby safeguarding them from damage.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage transients
  • Characteristics: High surge capability, fast response time
  • Package: DO-15
  • Essence: Safeguarding sensitive electronic components
  • Packaging/Quantity: Available in reels or bulk packaging

Specifications

  • Peak Power Dissipation: 600W
  • Breakdown Voltage: 24.4V to 27V
  • Operating Temperature Range: -55°C to +175°C
  • Reverse Standoff Voltage: 24.4V
  • Maximum Clamping Voltage: 41.4V at 10A

Detailed Pin Configuration

The P6KE27A-TP follows a standard DO-15 package configuration with two leads. The anode is connected to one lead, while the cathode is connected to the other lead.

Functional Features

  • Transient Voltage Suppression: Effectively clamps voltage surges to protect downstream components.
  • Fast Response Time: Rapidly responds to transient events to minimize potential damage.
  • High Surge Capability: Capable of handling high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • High surge capability

Disadvantages

  • Can degrade over time with repeated transient events
  • Requires proper installation for optimal performance

Working Principles

When a voltage transient occurs, the P6KE27A-TP conducts current and clamps the voltage to a safe level, preventing it from reaching sensitive components. This is achieved through the reverse-biased PN junction, which rapidly conducts when the voltage exceeds the breakdown voltage.

Detailed Application Field Plans

The P6KE27A-TP is commonly used in various applications, including: - Power supply units - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • P6KE6.8A-TP: Breakdown Voltage: 6.12V to 6.8V
  • P6KE10A-TP: Breakdown Voltage: 9.5V to 10.5V
  • P6KE18A-TP: Breakdown Voltage: 17.1V to 18.9V
  • P6KE33A-TP: Breakdown Voltage: 30.4V to 33.2V

In conclusion, the P6KE27A-TP transient voltage suppressor diode offers effective protection against voltage transients, making it an essential component in various electronic systems.

[Word Count: 411]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät P6KE27A-TP :n soveltamiseen teknisissä ratkaisuissa

Sure, here are 10 common questions and answers related to the application of P6KE27A-TP:

  1. What is the P6KE27A-TP?

    • The P6KE27A-TP is a transient voltage suppressor diode designed to protect electronic circuits from voltage spikes and transients.

  2. What is the maximum peak pulse power of P6KE27A-TP?

    • The maximum peak pulse power of P6KE27A-TP is 600 watts.

  3. What is the breakdown voltage of P6KE27A-TP?

    • The breakdown voltage of P6KE27A-TP is 27 volts.

  4. What are the typical applications of P6KE27A-TP?

    • P6KE27A-TP is commonly used in surge protection for sensitive electronics, such as in power supplies, communication equipment, and automotive electronics.

  5. How does P6KE27A-TP protect electronic circuits?

    • P6KE27A-TP clamps the voltage during transient events, diverting excess current away from the protected circuit, thus preventing damage.

  6. What is the response time of P6KE27A-TP?

    • The response time of P6KE27A-TP is very fast, typically in the nanosecond range.

  7. Can P6KE27A-TP be used in high-speed data lines?

    • Yes, P6KE27A-TP can be used to protect high-speed data lines from voltage surges and transients.

  8. Is P6KE27A-TP suitable for outdoor applications?

    • Yes, P6KE27A-TP is suitable for outdoor applications due to its rugged construction and ability to withstand harsh environmental conditions.

  9. What is the operating temperature range of P6KE27A-TP?

    • The operating temperature range of P6KE27A-TP is typically -55°C to 175°C.

  10. Are there any special handling considerations for P6KE27A-TP?

    • P6KE27A-TP should be handled carefully to avoid electrostatic discharge (ESD) and should be stored in a dry environment to prevent moisture absorption.

I hope these questions and answers are helpful! Let me know if you need further assistance.