Micro Commercial Co
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SM8S22A-TP
Näytä Yksityiskohdat DataSheets

SM8S22A-TP

Introduction

The SM8S22A-TP is a high-performance TVS (Transient Voltage Suppressor) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Product Overview

  • Category: Electronic Component
  • Use: Protection against voltage transients
  • Characteristics: High performance, reliability, fast response time
  • Package: SMC (DO-214AB)
  • Essence: Transient voltage suppression
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Standoff Voltage: 22V
  • Breakdown Voltage: 24.4V
  • Peak Pulse Power: 3kW
  • Operating Temperature Range: -55°C to +150°C
  • RoHS Compliant: Yes

Detailed Pin Configuration

The SM8S22A-TP follows the standard SMC (DO-214AB) package configuration with two leads.

Functional Features

  • Fast response time
  • Low clamping voltage
  • High surge capability
  • RoHS compliant

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Wide operating temperature range
  • RoHS compliant

Disadvantages

  • Higher initial cost compared to traditional diodes
  • Requires proper installation for optimal performance

Working Principles

The SM8S22A-TP operates based on the principle of avalanche breakdown, where it rapidly diverts excessive current away from sensitive components when a transient voltage event occurs. This protects the downstream circuitry from damage.

Detailed Application Field Plans

The SM8S22A-TP is widely used in various applications, including: - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics - Power supplies

Detailed and Complete Alternative Models

  • SM8S24A-TP
  • SM8S26A-TP
  • SM8S28A-TP
  • SM8S30A-TP

In conclusion, the SM8S22A-TP is a reliable and high-performance TVS diode that provides effective protection against voltage transients. Its fast response time, low clamping voltage, and high surge capability make it suitable for a wide range of applications in different industries.

[Word Count: 346]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SM8S22A-TP :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum peak pulse power of SM8S22A-TP?

    • The maximum peak pulse power of SM8S22A-TP is 800 watts for a 10/1000μs waveform.

  2. What is the breakdown voltage of SM8S22A-TP?

    • The breakdown voltage of SM8S22A-TP is 24.4V minimum and 27.1V maximum at 1mA.

  3. What is the operating temperature range of SM8S22A-TP?

    • The operating temperature range of SM8S22A-TP is -55°C to +150°C.

  4. What is the typical clamping voltage of SM8S22A-TP?

    • The typical clamping voltage of SM8S22A-TP is 35.5V at 10A.

  5. What is the reverse stand-off voltage of SM8S22A-TP?

    • The reverse stand-off voltage of SM8S22A-TP is 22V.

  6. What is the peak pulse current of SM8S22A-TP?

    • The peak pulse current of SM8S22A-TP is 87.7A for an 8/20μs waveform.

  7. What is the package type of SM8S22A-TP?

    • SM8S22A-TP comes in a DO-218AB package.

  8. Is SM8S22A-TP RoHS compliant?

    • Yes, SM8S22A-TP is RoHS compliant.

  9. What are the typical applications for SM8S22A-TP?

    • SM8S22A-TP is commonly used in surge protection for telecommunications equipment, power supplies, and other electronic devices.

  10. What are the key features of SM8S22A-TP?

    • The key features of SM8S22A-TP include low clamping voltage, fast response time, and high surge capability, making it suitable for various transient voltage suppression applications.