Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
24LC02B/SN

24LC02B/SN

Product Overview

Category

The 24LC02B/SN is a serial electrically erasable programmable read-only memory (EEPROM) integrated circuit.

Use

It is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, sensors, and other digital systems.

Characteristics

  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Non-volatile memory with I2C interface
  • Packaging/Quantity: Available in tape and reel packaging, with quantities varying based on supplier

Specifications

  • Memory Size: 2 Kbits
  • Interface Type: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

  1. A0: Chip Address Input
  2. A1: Chip Address Input
  3. A2: Chip Address Input
  4. VSS: Ground
  5. SDA: Serial Data
  6. SCL: Serial Clock
  7. WP: Write Protect
  8. VCC: Power Supply

Functional Features

  • Byte and Page Write Modes
  • Random and Sequential Read Modes
  • Self-timed Write Cycle
  • Hardware Write Protection

Advantages

  • Low power consumption
  • Small form factor
  • Easy interfacing with microcontrollers
  • High reliability and endurance

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 24LC02B/SN operates by using the I2C protocol to communicate with the host device. It stores and retrieves data through a series of read and write operations, utilizing its non-volatile memory cells.

Detailed Application Field Plans

  • Embedded Systems: Used for storing configuration data and firmware updates
  • IoT Devices: Utilized for storing sensor data and device settings
  • Consumer Electronics: Integrated into products for storing user preferences and calibration data

Detailed and Complete Alternative Models

  • 24LC04B/SN: 4 Kbit EEPROM with similar characteristics
  • 24AA02E48-I/SN: 2 Kbit EEPROM with EUI-48 Node Identity

This comprehensive entry provides an in-depth understanding of the 24LC02B/SN, covering its specifications, features, applications, and alternatives within the realm of non-volatile memory technology.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 24LC02B/SN :n soveltamiseen teknisissä ratkaisuissa

  1. Question: What is the maximum clock frequency for 24LC02B/SN?
    Answer: The maximum clock frequency for 24LC02B/SN is 400 kHz.

  2. Question: What is the operating voltage range for 24LC02B/SN?
    Answer: The operating voltage range for 24LC02B/SN is 1.7V to 5.5V.

  3. Question: Can 24LC02B/SN be used in automotive applications?
    Answer: Yes, 24LC02B/SN is suitable for use in automotive applications.

  4. Question: What is the typical write cycle time for 24LC02B/SN?
    Answer: The typical write cycle time for 24LC02B/SN is 5 ms.

  5. Question: Is 24LC02B/SN compatible with I2C communication protocol?
    Answer: Yes, 24LC02B/SN is compatible with I2C communication protocol.

  6. Question: What is the storage temperature range for 24LC02B/SN?
    Answer: The storage temperature range for 24LC02B/SN is -40°C to +125°C.

  7. Question: Can 24LC02B/SN be used in battery-powered devices?
    Answer: Yes, 24LC02B/SN can be used in battery-powered devices due to its low power consumption.

  8. Question: What is the maximum data transfer rate for 24LC02B/SN?
    Answer: The maximum data transfer rate for 24LC02B/SN is 100 kHz at 1.7V and 400 kHz at 5.5V.

  9. Question: Does 24LC02B/SN have built-in write protection?
    Answer: Yes, 24LC02B/SN features built-in hardware write protection.

  10. Question: Can 24LC02B/SN be used in industrial control systems?
    Answer: Yes, 24LC02B/SN is suitable for use in industrial control systems.