Microchip Technology
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
93C46B/P
Näytä Yksityiskohdat DataSheets

93C46B/P

Product Overview

Category

The 93C46B/P is a serial electrically erasable programmable read-only memory (EEPROM) chip.

Use

It is commonly used for non-volatile data storage in various electronic devices, such as automotive electronics, consumer electronics, and industrial applications.

Characteristics

  • The 93C46B/P offers low-power consumption and high reliability.
  • It comes in a compact 8-pin package.
  • The chip has a wide operating voltage range and can withstand harsh environmental conditions.

Package

The 93C46B/P is available in an 8-pin DIP (Dual In-line Package) or SOIC (Small Outline Integrated Circuit) package.

Essence

This EEPROM chip serves as a reliable and durable solution for storing critical data in electronic systems.

Packaging/Quantity

The 93C46B/P is typically sold in reels containing multiple units, with quantities varying based on the manufacturer's specifications.

Specifications

  • Memory Capacity: 1 Kbit (128 x 8 or 64 x 16 organization)
  • Operating Voltage Range: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Interface: Serial Microwire

Detailed Pin Configuration

  1. Chip Select (/CS)
  2. Serial Data Input (DI)
  3. Serial Data Output (DO)
  4. Serial Clock (SK)
  5. VSS (Ground)
  6. Write Enable (/W)
  7. VCC (Power Supply)
  8. Organization Select (NC)

Functional Features

  • Byte or Page Write Operation
  • Self-Timed Write Cycle
  • Enhanced ESD/Latch-Up Protection
  • Sequential Read Operation

Advantages and Disadvantages

Advantages

  • Low Power Consumption
  • Compact Package Size
  • High Reliability and Endurance
  • Wide Operating Voltage Range

Disadvantages

  • Limited Memory Capacity
  • Slower Write Speed Compared to Some Alternatives

Working Principles

The 93C46B/P operates by using an internal charge pump to generate the necessary programming voltage for write operations. It utilizes a serial interface for communication with the host system and employs a self-timed write cycle to ensure data integrity.

Detailed Application Field Plans

The 93C46B/P finds extensive use in automotive electronics for storing vehicle configuration data, in consumer electronics for firmware storage, and in industrial applications for parameter storage in control systems.

Detailed and Complete Alternative Models

Some alternative models to the 93C46B/P include the 93C66B/P, 93C86B/P, and 93C56B/P, which offer varying memory capacities and interface options to suit different application requirements.

In conclusion, the 93C46B/P EEPROM chip provides a reliable and efficient solution for non-volatile data storage in a wide range of electronic devices, making it a valuable component in modern technology.

[Word Count: 411]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 93C46B/P :n soveltamiseen teknisissä ratkaisuissa

  1. What is the 93C46B/P?
    The 93C46B/P is a serial electrically erasable programmable read-only memory (EEPROM) chip commonly used for non-volatile storage in various electronic devices.

  2. What is the operating voltage range of the 93C46B/P?
    The 93C46B/P typically operates within a voltage range of 4.5V to 5.5V.

  3. How much data can the 93C46B/P store?
    The 93C46B/P has a storage capacity of 1 kilobit, which is equivalent to 128 bytes.

  4. What is the maximum clock frequency supported by the 93C46B/P?
    The 93C46B/P supports a maximum clock frequency of 2 MHz.

  5. Can the 93C46B/P be reprogrammed multiple times?
    Yes, the 93C46B/P is designed for multiple reprogramming cycles, making it suitable for applications requiring frequent data updates.

  6. What are the typical applications of the 93C46B/P?
    The 93C46B/P is commonly used in automotive electronics, industrial control systems, and consumer electronics for storing calibration data, configuration settings, and identification information.

  7. Does the 93C46B/P have built-in security features?
    The 93C46B/P does not have advanced built-in security features, so additional measures may be required to protect sensitive data stored in the chip.

  8. What is the recommended operating temperature range for the 93C46B/P?
    The 93C46B/P is typically rated for operation within a temperature range of -40°C to 85°C.

  9. Can the 93C46B/P be directly interfaced with microcontrollers?
    Yes, the 93C46B/P can be easily interfaced with microcontrollers using standard serial communication protocols such as SPI or I2C.

  10. Is the 93C46B/P RoHS compliant?
    Yes, the 93C46B/P is compliant with the Restriction of Hazardous Substances (RoHS) directive, making it suitable for use in environmentally conscious designs.