Microchip Technology
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
AT93C46-10PC-2.5
Näytä Yksityiskohdat DataSheets

AT93C46-10PC-2.5

Product Overview

Category

The AT93C46-10PC-2.5 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices, including consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • Low power consumption
  • Small form factor
  • High reliability
  • Wide operating voltage range

Package

The AT93C46-10PC-2.5 is typically available in a 8-pin DIP (Dual Inline Package) format.

Essence

The essence of the AT93C46-10PC-2.5 lies in its ability to store and retrieve data reliably in electronic systems.

Packaging/Quantity

It is usually supplied in reels or tubes with quantities varying based on manufacturer specifications.

Specifications

  • Memory Size: 1 Kbit (128 x 8)
  • Interface: Serial I2C
  • Operating Voltage: 2.5V
  • Operating Temperature Range: -40°C to 85°C
  • Data Retention: 100 years
  • Write/Erase Cycles: 1,000,000 cycles

Detailed Pin Configuration

  1. Chip Select (CS)
  2. Serial Data Input/Output (SDI/O)
  3. Serial Clock (SCK)
  4. Ground (GND)
  5. No Connection (NC)
  6. Serial Data Output (SDO)
  7. Write Enable (WEN)
  8. Power Supply (VCC)

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Enhanced ESD Protection
  • Sequential Read Operation

Advantages

  • Low power consumption
  • Small form factor
  • High reliability and durability
  • Ease of integration into various electronic systems

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write/erase cycles compared to some alternatives

Working Principles

The AT93C46-10PC-2.5 operates by using an I2C interface to communicate with the host system. It stores data in a non-volatile manner, allowing for reliable retention of information even when power is removed.

Detailed Application Field Plans

The AT93C46-10PC-2.5 finds application in a wide range of fields, including: - Automotive: storing vehicle configuration settings and diagnostic data - Consumer Electronics: storing user preferences and calibration data - Industrial Control Systems: storing critical parameters and operational logs

Detailed and Complete Alternative Models

Some alternative models to the AT93C46-10PC-2.5 include: - AT24C01C - CAT24C01 - 24AA02E48T-I/OT

In conclusion, the AT93C46-10PC-2.5 is a versatile EEPROM chip with a range of applications across different industries, offering reliable non-volatile data storage in a compact form factor.

Word Count: 410

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät AT93C46-10PC-2.5 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the AT93C46-10PC-2.5?

    • The AT93C46-10PC-2.5 is a 3-wire serial EEPROM with 1K bit of memory.

  2. What are the typical applications of AT93C46-10PC-2.5?

    • It is commonly used in applications such as automotive, industrial, and consumer electronics for storing configuration data, calibration constants, and other non-volatile data.

  3. What is the operating voltage range of AT93C46-10PC-2.5?

    • The operating voltage range is typically from 2.7V to 5.5V.

  4. How do I interface with AT93C46-10PC-2.5?

    • It can be interfaced using a simple 3-wire serial communication protocol (clock, data in, data out).

  5. What is the maximum clock frequency for AT93C46-10PC-2.5?

    • The maximum clock frequency is 2.5 MHz.

  6. Can AT93C46-10PC-2.5 be used for storing sensitive data?

    • It is not recommended for storing sensitive or critical data due to its limited security features.

  7. What are the temperature ranges for AT93C46-10PC-2.5?

    • It typically operates within the industrial temperature range of -40°C to 85°C.

  8. Is AT93C46-10PC-2.5 suitable for battery-powered devices?

    • Yes, it is suitable for battery-powered devices due to its low power consumption.

  9. Can AT93C46-10PC-2.5 be used in automotive applications?

    • Yes, it is commonly used in automotive applications for storing vehicle-specific data and configurations.

  10. Are there any special considerations for PCB layout when using AT93C46-10PC-2.5?

    • It is important to follow the manufacturer's guidelines for PCB layout to ensure reliable operation and signal integrity.

Let me know if you need anything else.