Microchip Technology
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
AT94K10AL-25AJI
Näytä Yksityiskohdat DataSheets

AT94K10AL-25AJI

Product Overview

Category

AT94K10AL-25AJI belongs to the category of Field-Programmable Gate Arrays (FPGAs).

Use

This product is primarily used in digital logic circuits for various applications such as telecommunications, automotive electronics, consumer electronics, and industrial automation.

Characteristics

  • High-performance FPGA with advanced features
  • Low power consumption
  • Flexible and reprogrammable design
  • High-speed data processing capabilities

Package

AT94K10AL-25AJI is available in a compact and durable package suitable for surface mount technology (SMT) assembly.

Essence

The essence of this product lies in its ability to provide customizable digital logic functionality through programmable interconnects and configurable logic blocks.

Packaging/Quantity

AT94K10AL-25AJI is typically packaged in reels or trays, with each reel containing a specific quantity of units. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Model: AT94K10AL-25AJI
  • Operating Voltage: 2.5V
  • Logic Cells: 10,000
  • Maximum Frequency: 100 MHz
  • I/O Pins: 64
  • Memory Capacity: 256 Kbits
  • Configuration Method: Serial or Parallel

Detailed Pin Configuration

The pin configuration of AT94K10AL-25AJI is as follows:

  1. VCCIO
  2. GND
  3. IO0
  4. IO1
  5. IO2
  6. IO3
  7. IO4
  8. IO5
  9. IO6
  10. IO7
  11. IO8
  12. IO9
  13. IO10
  14. IO11
  15. IO12
  16. IO13
  17. IO14
  18. IO15
  19. IO16
  20. IO17
  21. IO18
  22. IO19
  23. IO20
  24. IO21
  25. IO22
  26. IO23
  27. IO24
  28. IO25
  29. IO26
  30. IO27
  31. IO28
  32. IO29
  33. IO30
  34. IO31
  35. IO32
  36. IO33
  37. IO34
  38. IO35
  39. IO36
  40. IO37
  41. IO38
  42. IO39
  43. IO40
  44. IO41
  45. IO42
  46. IO43
  47. IO44
  48. IO45
  49. IO46
  50. IO47
  51. IO48
  52. IO49
  53. IO50
  54. IO51
  55. IO52
  56. IO53
  57. IO54
  58. IO55
  59. IO56
  60. IO57
  61. IO58
  62. IO59
  63. IO60
  64. IO61

Functional Features

  • Configurable logic blocks for implementing custom digital circuits
  • Programmable interconnects for flexible routing of signals
  • On-chip memory for storing configuration data
  • Built-in clock management resources for precise timing control
  • Support for various I/O standards and protocols
  • Integrated power management features for efficient operation

Advantages and Disadvantages

Advantages

  • Versatile and adaptable design for a wide range of applications
  • High-performance capabilities with fast data processing speeds
  • Low power consumption for energy-efficient operation
  • Reprogrammable nature allows for iterative development and updates
  • Compact package size suitable for space-constrained designs

Disadvantages

  • Initial setup and configuration may require specialized knowledge
  • Limited memory capacity compared to some other FPGA models
  • Higher cost compared to traditional fixed-function integrated circuits

Working Principles

AT94K10AL-25AJI operates based on the principles of reconfigurable digital logic. It consists of configurable logic blocks (CLBs) that can be programmed to implement desired logic functions. These CLBs are interconnected through programmable interconnects, allowing for flexible routing of signals. The configuration data is stored in on-chip memory and can be loaded during startup or dynamically updated during operation.

Detailed Application Field Plans

AT94K10AL-25AJI finds applications in various fields, including:

  1. Telecommunications: Used in network routers, switches, and communication equipment for high-speed data processing and protocol handling.
  2. Automotive Electronics: Employed in automotive control systems, infotainment systems, and driver assistance systems for efficient signal processing and control.
  3. Consumer Electronics: Utilized in multimedia devices, gaming consoles, and smart home appliances for implementing complex functionality and signal processing algorithms.
  4. Industrial Automation: Integrated into industrial control systems, robotics, and factory automation equipment for real-time

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät AT94K10AL-25AJI :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of AT94K10AL-25AJI in technical solutions:

  1. Q: What is the AT94K10AL-25AJI? A: The AT94K10AL-25AJI is a high-performance Field Programmable Gate Array (FPGA) device manufactured by Microchip Technology.

  2. Q: What are the key features of the AT94K10AL-25AJI? A: The key features of this FPGA include 10,000 logic cells, 25 MHz operating frequency, 5V voltage supply, and JTAG programming interface.

  3. Q: What are some typical applications of the AT94K10AL-25AJI? A: This FPGA can be used in various applications such as industrial automation, telecommunications, automotive electronics, medical devices, and consumer electronics.

  4. Q: How can I program the AT94K10AL-25AJI? A: The AT94K10AL-25AJI can be programmed using the Joint Test Action Group (JTAG) interface, which allows for easy configuration and reconfiguration of the FPGA.

  5. Q: What development tools are available for designing with the AT94K10AL-25AJI? A: Microchip provides development tools like the Atmel Studio IDE and Atmel Hardware Platform Kits that support the design and programming of this FPGA.

  6. Q: Can I interface the AT94K10AL-25AJI with other components or peripherals? A: Yes, the FPGA has various I/O pins that can be used to interface with other components or peripherals such as sensors, displays, memory devices, and communication modules.

  7. Q: What is the power consumption of the AT94K10AL-25AJI? A: The power consumption of this FPGA depends on the design and operating conditions, but it is typically low due to its advanced architecture and power management features.

  8. Q: Is the AT94K10AL-25AJI suitable for real-time applications? A: Yes, this FPGA can be used in real-time applications as it offers high-speed processing capabilities and deterministic performance when properly designed.

  9. Q: Can I use the AT94K10AL-25AJI in harsh environments? A: Yes, the AT94K10AL-25AJI is designed to operate reliably in a wide range of temperature and humidity conditions, making it suitable for harsh industrial or automotive environments.

  10. Q: Are there any limitations or considerations when using the AT94K10AL-25AJI? A: Some considerations include proper power supply design, managing I/O voltage levels, and ensuring compatibility with other system components. Additionally, understanding the FPGA's resources and limitations is important for efficient design implementation.

Please note that these answers are general and may vary depending on specific application requirements and design considerations.