Microchip Technology
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
KSZ8893MBLI
Näytä Yksityiskohdat DataSheets

KSZ8893MBLI

Product Overview

Category

The KSZ8893MBLI belongs to the category of Ethernet switches.

Use

It is primarily used for networking applications, specifically in Ethernet-based systems.

Characteristics

  • High-performance Ethernet switch
  • Integrated 3-port switch with advanced features
  • Low power consumption
  • Small form factor

Package

The KSZ8893MBLI comes in a compact package, suitable for easy integration into various electronic devices.

Essence

The essence of the KSZ8893MBLI lies in its ability to provide efficient and reliable Ethernet switching capabilities.

Packaging/Quantity

The product is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.

Specifications

The KSZ8893MBLI offers the following specifications:

  • Number of Ports: 3
  • Data Transfer Rate: Up to 100 Mbps
  • Power Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: QFN

Detailed Pin Configuration

The pin configuration of the KSZ8893MBLI is as follows:

  1. VDD33
  2. TXD0
  3. TXD1
  4. TXD2
  5. RXD0
  6. RXD1
  7. RXD2
  8. MDC
  9. MDIO
  10. CRS
  11. COL
  12. RXDV
  13. RXERR
  14. TXEN
  15. TXCLK
  16. RXCLK
  17. RESET
  18. VSS

Functional Features

The KSZ8893MBLI offers the following functional features:

  • VLAN support
  • Quality of Service (QoS) prioritization
  • Auto-negotiation
  • Flow control
  • Energy-efficient Ethernet (EEE)
  • Jumbo frame support

Advantages and Disadvantages

Advantages

  • High-performance switching capabilities
  • Low power consumption
  • Compact form factor
  • Advanced features for efficient networking

Disadvantages

  • Limited number of ports (3)
  • Relatively high cost compared to simpler Ethernet switches

Working Principles

The KSZ8893MBLI operates based on the principles of Ethernet switching. It receives incoming data packets, examines their destination addresses, and forwards them to the appropriate port. This process ensures efficient communication between connected devices.

Detailed Application Field Plans

The KSZ8893MBLI is suitable for various application fields, including:

  1. Industrial automation systems
  2. Home networking devices
  3. Internet of Things (IoT) applications
  4. Embedded systems
  5. Communication equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the KSZ8893MBLI include:

  1. KSZ8863RLL: A 3-port Ethernet switch with integrated PHYs.
  2. KSZ8463MLI: A 3-port managed Ethernet switch with advanced features.
  3. KSZ9563RLL: A 3-port Gigabit Ethernet switch with integrated PHYs.

These alternative models provide options for different requirements and specifications within the Ethernet switch category.

In conclusion, the KSZ8893MBLI is a high-performance Ethernet switch with advanced features. Its compact size, low power consumption, and efficient networking capabilities make it suitable for various applications in industrial automation, home networking, IoT, embedded systems, and communication equipment. While it has a limited number of ports, there are alternative models available to cater to different needs within the Ethernet switch category.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät KSZ8893MBLI :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of KSZ8893MBLI in technical solutions:

  1. Q: What is KSZ8893MBLI? A: KSZ8893MBLI is a highly integrated Ethernet switch IC designed for use in industrial and embedded applications.

  2. Q: What are the key features of KSZ8893MBLI? A: Some key features of KSZ8893MBLI include three integrated 10/100 Ethernet transceivers, advanced QoS capabilities, VLAN support, and low power consumption.

  3. Q: Can KSZ8893MBLI be used in PoE (Power over Ethernet) applications? A: No, KSZ8893MBLI does not support Power over Ethernet functionality. It is primarily designed for data switching applications.

  4. Q: Is KSZ8893MBLI suitable for industrial environments? A: Yes, KSZ8893MBLI is designed to operate reliably in harsh industrial environments, making it suitable for various industrial applications.

  5. Q: Does KSZ8893MBLI support any management interfaces? A: Yes, KSZ8893MBLI supports both SPI and I2C management interfaces, allowing for easy configuration and monitoring of the switch.

  6. Q: Can KSZ8893MBLI be used in a redundant network setup? A: Yes, KSZ8893MBLI supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), enabling the creation of redundant network topologies.

  7. Q: What is the maximum number of VLANs supported by KSZ8893MBLI? A: KSZ8893MBLI supports up to 64 VLANs, allowing for efficient network segmentation and traffic isolation.

  8. Q: Does KSZ8893MBLI support jumbo frames? A: Yes, KSZ8893MBLI supports jumbo frames up to 9 KB in size, which can be beneficial for certain applications that require large data transfers.

  9. Q: Can KSZ8893MBLI operate in a power-saving mode? A: Yes, KSZ8893MBLI features an energy-efficient Ethernet (EEE) mode, which reduces power consumption during periods of low network activity.

  10. Q: Are there any reference designs or evaluation boards available for KSZ8893MBLI? A: Yes, Microchip provides reference designs and evaluation boards that can help developers quickly prototype and evaluate their solutions using KSZ8893MBLI.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.