Microchip Technology
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MCP2003B-E/MC
Näytä Yksityiskohdat DataSheets

MCP2003B-E/MC

Product Overview

Category

The MCP2003B-E/MC belongs to the category of integrated circuits (ICs) specifically designed for automotive applications.

Use

This product is primarily used for communication and control purposes in automotive systems. It enables reliable data transmission between various components within a vehicle.

Characteristics

  • Robust design suitable for harsh automotive environments
  • Low power consumption
  • High noise immunity
  • Wide operating voltage range
  • Enhanced ESD protection

Package

The MCP2003B-E/MC is available in a small outline integrated circuit (SOIC) package, which ensures easy integration into automotive electronic systems.

Essence

The essence of the MCP2003B-E/MC lies in its ability to facilitate efficient and secure communication between different automotive modules, ensuring smooth operation of the vehicle's electrical systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +125°C
  • Communication Protocol: LIN (Local Interconnect Network)
  • Maximum Data Rate: 20 Kbps
  • Number of Pins: 8

Detailed Pin Configuration

  1. VDD - Power supply input
  2. GND - Ground reference
  3. TXD - LIN bus transmit data
  4. RXD - LIN bus receive data
  5. WAKE - Wake-up signal input
  6. INH - Inhibit input
  7. VBAT - Battery voltage input
  8. VSUP - Voltage supply output

Functional Features

  • LIN bus communication interface
  • Sleep mode with wake-up capability
  • Overvoltage and undervoltage detection
  • Short-circuit and overtemperature protection
  • Integrated voltage regulator

Advantages and Disadvantages

Advantages

  • Reliable communication in automotive systems
  • Low power consumption for improved energy efficiency
  • Robust design suitable for harsh environments
  • Enhanced protection against electrical disturbances
  • Compact package for easy integration

Disadvantages

  • Limited data rate compared to other communication protocols
  • Restricted to automotive applications

Working Principles

The MCP2003B-E/MC operates based on the LIN protocol, which is a widely used communication standard in the automotive industry. It utilizes a master-slave architecture, where one module acts as the master and others as slaves. The master module initiates communication by transmitting data frames, while the slave modules respond accordingly.

Detailed Application Field Plans

The MCP2003B-E/MC finds extensive application in various automotive systems, including:

  1. Body control modules
  2. Climate control systems
  3. Lighting systems
  4. Powertrain control units
  5. Infotainment systems

Detailed and Complete Alternative Models

  1. MCP2021-E/P - LIN transceiver with higher data rate capability
  2. MCP2025-E/P - LIN transceiver with enhanced ESD protection
  3. MCP2026-E/P - LIN transceiver with integrated voltage regulator

These alternative models offer similar functionality to the MCP2003B-E/MC but may have different specifications or additional features.

In conclusion, the MCP2003B-E/MC is a reliable and efficient LIN transceiver designed specifically for automotive applications. Its robust design, low power consumption, and enhanced protection make it an ideal choice for various automotive systems.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MCP2003B-E/MC :n soveltamiseen teknisissä ratkaisuissa

  1. What is the MCP2003B-E/MC?

    • The MCP2003B-E/MC is a low-power, high-voltage, dual-channel CAN transceiver with integrated wake-up and protection features.

  2. What is the operating voltage range of the MCP2003B-E/MC?

    • The operating voltage range of the MCP2003B-E/MC is from 4.5V to 28V.

  3. What are the typical applications of the MCP2003B-E/MC?

    • Typical applications include automotive and industrial networks, battery management systems, and various other CAN-based communication systems.

  4. Does the MCP2003B-E/MC support bus fault protection?

    • Yes, the MCP2003B-E/MC features bus fault protection for overvoltage, undervoltage, and overtemperature conditions.

  5. What is the maximum data rate supported by the MCP2003B-E/MC?

    • The MCP2003B-E/MC supports data rates up to 1 Mbps.

  6. Is the MCP2003B-E/MC compatible with ISO11898-2 and ISO11898-5 standards?

    • Yes, the MCP2003B-E/MC is fully compatible with both ISO11898-2 and ISO11898-5 standards.

  7. Can the MCP2003B-E/MC be used in harsh automotive environments?

    • Yes, the MCP2003B-E/MC is designed to operate reliably in harsh automotive environments, meeting AEC-Q100 Grade 0 requirements.

  8. What is the quiescent current consumption of the MCP2003B-E/MC?

    • The quiescent current consumption of the MCP2003B-E/MC is typically 10 µA.

  9. Does the MCP2003B-E/MC have built-in ESD protection?

    • Yes, the MCP2003B-E/MC features built-in ESD protection up to ±8 kV on the bus pins.

  10. Is the MCP2003B-E/MC available in different package options?

    • Yes, the MCP2003B-E/MC is available in SOIC and DFN package options to suit different application requirements.