Microsemi Corporation
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
JANTX1N4484CUS
Näytä Yksityiskohdat DataSheets

JANTX1N4484CUS

Product Overview

Category

The JANTX1N4484CUS belongs to the category of semiconductor diodes.

Use

It is commonly used for rectification, voltage regulation, and signal demodulation in electronic circuits.

Characteristics

  • High current carrying capability
  • Low forward voltage drop
  • Fast switching speed
  • High reliability

Package

The JANTX1N4484CUS is typically available in a DO-41 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) and for regulating voltage in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Forward Voltage: 1V
  • Maximum Reverse Voltage: 100V
  • Maximum Forward Current: 1A
  • Reverse Recovery Time: 4ns
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The JANTX1N4484CUS has two pins, an anode and a cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

  • Efficient rectification of AC to DC
  • Precise voltage regulation
  • Fast response time for signal demodulation

Advantages

  • High current handling capacity
  • Low power dissipation
  • Compact size
  • Wide operating temperature range

Disadvantages

  • Higher forward voltage drop compared to Schottky diodes
  • Limited reverse voltage tolerance

Working Principles

The JANTX1N4484CUS operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the reverse direction. When forward biased, it conducts current with minimal voltage drop, enabling efficient rectification and voltage regulation.

Detailed Application Field Plans

Power Supplies

The diode is widely used in power supply circuits for converting AC mains voltage to DC, providing a stable output for various electronic devices.

Signal Demodulation

In communication systems, the diode is utilized for demodulating amplitude-modulated (AM) signals, extracting the original information from the modulated carrier wave.

Voltage Regulation

It is employed in voltage regulator circuits to maintain a constant output voltage despite fluctuations in input voltage or load variations.

Detailed and Complete Alternative Models

  • 1N4001
  • 1N4002
  • 1N4003
  • 1N4004
  • 1N4005

These alternative models offer similar characteristics and are interchangeable with the JANTX1N4484CUS in many applications.

This content provides a comprehensive overview of the JANTX1N4484CUS semiconductor diode, covering its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät JANTX1N4484CUS :n soveltamiseen teknisissä ratkaisuissa

Sure, here are 10 common questions and answers related to the application of JANTX1N4484CUS:

  1. What is the JANTX1N4484CUS diode used for?

    • The JANTX1N4484CUS is a high-reliability, military-grade diode commonly used in aerospace, defense, and other critical applications.

  2. What are the key specifications of the JANTX1N4484CUS diode?

    • The JANTX1N4484CUS is a 1N4484 diode with specific military and aerospace qualifications, including extended temperature range, high reliability, and stringent testing requirements.

  3. How does the JANTX1N4484CUS diode differ from commercial diodes?

    • The JANTX1N4484CUS diode undergoes additional testing and screening to meet strict military and aerospace standards, ensuring higher reliability and performance in harsh environments.

  4. In what types of technical solutions is the JANTX1N4484CUS diode commonly used?

    • The JANTX1N4484CUS diode is often used in avionics, radar systems, communication equipment, power supplies, and other mission-critical electronic systems.

  5. What are the temperature and voltage ratings of the JANTX1N4484CUS diode?

    • The JANTX1N4484CUS diode is rated for operation over a wide temperature range (-65°C to +175°C) and can handle voltages up to 200 volts.

  6. Can the JANTX1N4484CUS diode be used in high-frequency applications?

    • Yes, the JANTX1N4484CUS diode has a fast response time and low capacitance, making it suitable for high-frequency applications such as RF and microwave circuits.

  7. Is the JANTX1N4484CUS diode available in surface-mount packages?

    • Yes, the JANTX1N4484CUS diode is available in various surface-mount packages, making it suitable for modern compact electronic designs.

  8. What are the reliability qualifications of the JANTX1N4484CUS diode?

    • The JANTX1N4484CUS diode meets MIL-PRF-19500/528 specifications, ensuring high reliability and performance under extreme conditions.

  9. Can the JANTX1N4484CUS diode withstand mechanical shock and vibration?

    • Yes, the JANTX1N4484CUS diode is designed to withstand mechanical shock and vibration, making it suitable for rugged applications.

  10. Where can I find detailed specifications and application notes for the JANTX1N4484CUS diode?

    • Detailed specifications and application notes for the JANTX1N4484CUS diode can be found in the manufacturer's datasheets and application guides, as well as in military and aerospace electronic component catalogs.