Microsemi Corporation
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
JANTX1N4965C
Näytä Yksityiskohdat DataSheets

JANTX1N4965C

Product Overview

Category

The JANTX1N4965C belongs to the category of semiconductor diodes.

Use

It is commonly used in electronic circuits for rectification, voltage regulation, and signal demodulation.

Characteristics

  • High current carrying capability
  • Low forward voltage drop
  • Fast switching speed
  • High reliability

Package

The JANTX1N4965C is typically available in a DO-41 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) and for regulating voltage in electronic devices.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Forward Voltage: 1.1V
  • Reverse Voltage: 200V
  • Forward Current: 1A
  • Reverse Recovery Time: 4ns

Detailed Pin Configuration

The JANTX1N4965C has two pins, an anode and a cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

  • Efficient rectification of AC to DC
  • Precise voltage regulation
  • Fast response time for signal demodulation

Advantages

  • High current handling capacity
  • Low power dissipation
  • Reliable performance over a wide temperature range

Disadvantages

  • Higher forward voltage compared to some modern diode alternatives
  • Sensitive to reverse voltage spikes

Working Principles

The JANTX1N4965C operates based on the principles of semiconductor physics, utilizing the properties of P-N junctions to allow current flow in one direction while blocking it in the reverse direction.

Detailed Application Field Plans

The JANTX1N4965C is widely used in: - Power supply units - Voltage regulators - Signal demodulation circuits - Rectifiers in electronic equipment

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N4965C include: - 1N4001: General-purpose diode with similar characteristics - 1N5408: Higher voltage rating diode - 1N5819: Schottky diode with lower forward voltage drop

This completes the English editing encyclopedia entry structure format for the JANTX1N4965C, covering its product details, specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät JANTX1N4965C :n soveltamiseen teknisissä ratkaisuissa

  1. What is the JANTX1N4965C diode used for?

    • The JANTX1N4965C diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.

  2. What are the key specifications of the JANTX1N4965C diode?

    • The JANTX1N4965C diode is a 200V, 10A rectifier diode with fast recovery times and low forward voltage drop.

  3. How does the JANTX1N4965C diode compare to other similar diodes?

    • The JANTX1N4965C diode offers high reliability, rugged construction, and consistent performance, making it suitable for demanding applications.

  4. Can the JANTX1N4965C diode handle high current surges?

    • Yes, the JANTX1N4965C diode is designed to withstand high current surges, making it suitable for applications where transient overvoltage protection is required.

  5. In what types of technical solutions is the JANTX1N4965C diode commonly used?

    • The JANTX1N4965C diode is often used in power supplies, industrial equipment, automotive systems, and aerospace applications due to its robustness and reliability.

  6. What are the temperature ratings for the JANTX1N4965C diode?

    • The JANTX1N4965C diode is rated for operation over a wide temperature range, typically from -65°C to 175°C, ensuring its suitability for harsh environments.

  7. Does the JANTX1N4965C diode require any special mounting considerations?

    • The JANTX1N4965C diode should be mounted on a suitable heat sink to ensure proper thermal management, especially in high-power applications.

  8. Are there any common failure modes associated with the JANTX1N4965C diode?

    • While the JANTX1N4965C diode is highly reliable, common failure modes can include thermal overstress or excessive reverse voltage, emphasizing the importance of proper application design.

  9. Can the JANTX1N4965C diode be used in parallel for higher current applications?

    • Yes, the JANTX1N4965C diode can be used in parallel to increase current-handling capability, but careful attention must be paid to current sharing and thermal considerations.

  10. Where can I find detailed application notes and guidelines for using the JANTX1N4965C diode in technical solutions?

    • Detailed application notes and guidelines for the JANTX1N4965C diode can be found in the manufacturer's datasheet, which provides comprehensive information on its usage and performance characteristics.