Microsemi Corporation
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MPLAD7.5KP45A/TR
Näytä Yksityiskohdat DataSheets

MPLAD7.5KP45A/TR

Introduction

The MPLAD7.5KP45A/TR is a high-performance transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides an overview of the MPLAD7.5KP45A/TR, including its product category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category

The MPLAD7.5KP45A/TR belongs to the category of TVS diodes, which are widely used in various electronic systems to protect against voltage surges and transients.

Basic Information Overview

  • Use: The MPLAD7.5KP45A/TR is used to provide surge protection for sensitive electronic components and circuits.
  • Characteristics: It offers high surge capability, low clamping voltage, and fast response time.
  • Package: The device is available in a compact, surface-mount package.
  • Essence: Its essence lies in providing robust protection against transient voltage events.
  • Packaging/Quantity: The MPLAD7.5KP45A/TR is typically supplied in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Voltage Rating: 7.5kV
  • Peak Pulse Power: 45A
  • Operating Temperature Range: -55°C to +175°C
  • Breakdown Voltage: 8.33V to 9.21V
  • Package Type: SMC (DO-214AB)

Detailed Pin Configuration

The MPLAD7.5KP45A/TR typically features a standard SMC (DO-214AB) package with two pins for surface-mount installation.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to safe levels.
  • Fast Response Time: Rapid reaction to transient events ensures minimal impact on protected circuits.
  • Low Clamping Voltage: Provides efficient protection without compromising circuit performance.

Advantages and Disadvantages

Advantages

  • High surge capability
  • Fast response time
  • Compact form factor

Disadvantages

  • Higher cost compared to standard diodes
  • Limited to specific voltage and current ratings

Working Principles

The MPLAD7.5KP45A/TR operates by diverting excessive transient currents away from sensitive components, thereby limiting the voltage across the protected circuit.

Detailed Application Field Plans

The MPLAD7.5KP45A/TR is commonly employed in the following applications: - Telecommunication equipment - Industrial control systems - Power supply units - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • MPLAD5.0KP10A/TR: Lower voltage rating with similar power handling capabilities.
  • MPLAD15KP100A/TR: Higher voltage rating and peak pulse power for more demanding applications.
  • MPLAD6.0KP30A/TR: Intermediate voltage rating with moderate surge protection.

In conclusion, the MPLAD7.5KP45A/TR is a reliable TVS diode offering robust transient voltage suppression for a wide range of electronic applications.

[Word count: 443]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MPLAD7.5KP45A/TR :n soveltamiseen teknisissä ratkaisuissa

  1. What is MPLAD7.5KP45A/TR?

    • MPLAD7.5KP45A/TR is a high-power transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

  2. What is the maximum peak pulse power of MPLAD7.5KP45A/TR?

    • The maximum peak pulse power of MPLAD7.5KP45A/TR is 7500W, making it suitable for handling high transient power surges.

  3. What is the breakdown voltage of MPLAD7.5KP45A/TR?

    • The breakdown voltage of MPLAD7.5KP45A/TR ranges from 7.5V to 45V, providing protection against a wide range of voltage transients.

  4. In what applications can MPLAD7.5KP45A/TR be used?

    • MPLAD7.5KP45A/TR can be used in various applications such as power supplies, industrial equipment, automotive electronics, and telecommunications equipment to protect them from voltage surges.

  5. What are the key features of MPLAD7.5KP45A/TR?

    • The key features of MPLAD7.5KP45A/TR include low clamping voltage, fast response time, high surge capability, and compact package size.

  6. How does MPLAD7.5KP45A/TR provide protection against voltage transients?

    • MPLAD7.5KP45A/TR utilizes avalanche breakdown to divert excessive current away from sensitive components, thereby protecting them from damage due to voltage transients.

  7. What are the temperature specifications for MPLAD7.5KP45A/TR?

    • MPLAD7.5KP45A/TR has an operating temperature range of -55°C to +175°C, allowing it to function effectively in harsh environmental conditions.

  8. Is MPLAD7.5KP45A/TR compliant with industry standards?

    • Yes, MPLAD7.5KP45A/TR complies with industry standards such as RoHS (Restriction of Hazardous Substances) and is designed to meet the requirements of various regulatory bodies.

  9. Can MPLAD7.5KP45A/TR be used for surge protection in outdoor applications?

    • Yes, MPLAD7.5KP45A/TR is suitable for outdoor applications where protection against lightning-induced surges is required, thanks to its high surge capability and robust construction.

  10. Are there any application notes or reference designs available for using MPLAD7.5KP45A/TR in technical solutions?

    • Yes, application notes and reference designs are available from the manufacturer to guide engineers and designers in implementing MPLAD7.5KP45A/TR effectively in their technical solutions.