Monolithic Power Systems Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MP8757GL-P

MP8757GL-P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1.5A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP8757GL-P has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Compact size enables space-saving designs
  • Low power consumption prolongs battery life
  • Enable pin provides control over device operation
  • Feedback pin allows for voltage regulation adjustment

Advantages and Disadvantages

Advantages: - Wide input voltage range accommodates various power sources - High efficiency reduces energy waste and heat generation - Compact size facilitates integration into small form factor devices - Low power consumption extends battery life in portable applications

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The MP8757GL-P is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.6V and 3.3V. It achieves this by utilizing a switching regulator topology, which efficiently steps down the input voltage to the desired output level. The device employs a control loop that continuously adjusts the duty cycle of the internal power switch to maintain a stable output voltage despite variations in the input voltage and load conditions.

Detailed Application Field Plans

The MP8757GL-P is commonly used in various electronic devices and systems, including but not limited to:

  1. Portable electronic devices: Smartphones, tablets, portable media players
  2. Wearable devices: Smartwatches, fitness trackers
  3. IoT (Internet of Things) devices: Sensors, wireless modules
  4. Battery-powered applications: Handheld gaming consoles, remote controls
  5. Industrial equipment: Test and measurement instruments, automation systems

Detailed and Complete Alternative Models

  1. MP8758GL-P: Similar specifications with higher maximum output current (2A)
  2. MP8756GL-P: Similar specifications with lower maximum output current (1A)
  3. MP8760GL-P: Higher efficiency variant with similar specifications
  4. MP8742GL-P: Lower cost variant with slightly reduced efficiency

Note: The above alternative models are provided as examples and may not cover all available options in the market.

This entry provides an overview of the MP8757GL-P, a voltage regulator IC designed for power management applications. Its compact size, high efficiency, and low power consumption make it suitable for a wide range of electronic devices. The detailed specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models offer comprehensive information for users seeking to understand or utilize the MP8757GL-P.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MP8757GL-P :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MP8757GL-P in technical solutions:

  1. Q: What is the MP8757GL-P? A: The MP8757GL-P is a high-performance power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of the MP8757GL-P? A: The MP8757GL-P offers multiple voltage regulators, power switches, and other essential functions required for efficient power management in technical solutions.

  3. Q: What applications can benefit from using the MP8757GL-P? A: The MP8757GL-P is commonly used in applications such as industrial automation, robotics, consumer electronics, automotive systems, and more.

  4. Q: How many voltage regulators does the MP8757GL-P provide? A: The MP8757GL-P provides multiple voltage regulators, typically including buck converters, boost converters, and LDOs (low-dropout regulators).

  5. Q: Can the MP8757GL-P handle high current loads? A: Yes, the MP8757GL-P is designed to handle high current loads, making it suitable for power-hungry applications.

  6. Q: Does the MP8757GL-P support input/output voltage range flexibility? A: Yes, the MP8757GL-P typically supports a wide input voltage range and provides adjustable output voltages to accommodate different system requirements.

  7. Q: Is the MP8757GL-P easy to integrate into existing designs? A: Yes, the MP8757GL-P is designed to be easily integrated into existing designs, with features like small form factor packages and minimal external components.

  8. Q: Does the MP8757GL-P offer any protection features? A: Yes, the MP8757GL-P often includes protection features such as overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown to ensure system safety.

  9. Q: Can the MP8757GL-P operate in different temperature ranges? A: Yes, the MP8757GL-P is typically designed to operate within a wide temperature range, making it suitable for various environments.

  10. Q: Where can I find more information about the MP8757GL-P? A: You can refer to the datasheet, application notes, or contact the manufacturer's technical support for more detailed information about the MP8757GL-P.