Nexperia USA Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
74HC595D,112
Näytä Yksityiskohdat DataSheets

74HC595D,112

Product Overview

Category

The 74HC595D,112 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used as a shift register and output latch in various digital applications.

Characteristics

  • High-speed operation
  • Wide operating voltage range
  • Low power consumption
  • Serial-to-parallel data conversion
  • Cascadable for larger applications

Package

The 74HC595D,112 is available in a small outline package (SOP) with 16 pins.

Essence

The essence of this product lies in its ability to efficiently control multiple outputs using a minimal number of microcontroller pins.

Packaging/Quantity

The 74HC595D,112 is typically packaged in reels or tubes, with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: 2V to 6V
  • Output Current: 35mA
  • Operating Temperature Range: -40°C to +125°C
  • Shift Register Stages: 8
  • Clock Frequency: Up to 25MHz

Detailed Pin Configuration

  1. SER (Serial Data Input)
  2. RCLK (Register Clock Input)
  3. SRCLK (Shift Register Clock Input)
  4. OE (Output Enable Input)
  5. SRCLR (Shift Register Clear Input)
  6. QA-QH (Parallel Outputs)
  7. GND (Ground)
  8. VCC (Supply Voltage)

Functional Features

  • Serial data input with parallel output capability
  • Cascadable for expanding the number of outputs
  • Output enable and shift register clear functions for flexible control
  • High-speed operation allows for efficient data transfer

Advantages and Disadvantages

Advantages

  • Simplifies microcontroller pin usage
  • Allows control of multiple outputs with fewer resources
  • High-speed operation for time-critical applications

Disadvantages

  • Limited number of output pins
  • Requires additional components for cascading multiple ICs

Working Principles

The 74HC595D,112 operates by shifting data in a serial manner into its internal shift register. The clock inputs control the shifting process, while the latch input transfers the parallel data to the output pins. The output enable and shift register clear inputs provide additional control over the outputs.

Detailed Application Field Plans

The 74HC595D,112 finds application in various fields, including:

  1. LED Matrix Displays: Controlling multiple LEDs with limited microcontroller pins.
  2. Seven-Segment Displays: Driving multiple segments using minimal resources.
  3. Motor Control: Sequentially activating motor coils for precise control.
  4. Data Storage: Storing and retrieving data in a serial-to-parallel fashion.
  5. Multiplexing: Efficiently switching between multiple inputs or outputs.

Detailed and Complete Alternative Models

  1. 74HC595N: Similar functionality but available in a DIP package.
  2. SN74HC595: Equivalent IC from a different manufacturer.
  3. CD74HC595: Another alternative with comparable specifications.

(Note: This list is not exhaustive and other alternatives may exist.)

Word count: 440 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 74HC595D,112 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of 74HC595D,112 in technical solutions:

  1. Q: What is the 74HC595D,112? A: The 74HC595D,112 is an 8-bit serial-in, serial or parallel-out shift register with output latches. It can be used to expand the number of digital outputs in a microcontroller-based system.

  2. Q: How does the 74HC595D,112 work? A: The 74HC595D,112 receives data serially and shifts it into its internal registers. The shifted data can then be outputted in parallel to control multiple devices such as LEDs, relays, or other digital components.

  3. Q: What is the maximum clock frequency for the 74HC595D,112? A: The maximum clock frequency for the 74HC595D,112 is typically around 25 MHz.

  4. Q: Can I daisy-chain multiple 74HC595D,112 chips together? A: Yes, you can daisy-chain multiple 74HC595D,112 chips together to further expand the number of outputs. The output of one chip can be connected to the input of another.

  5. Q: How many outputs can I control with a single 74HC595D,112? A: With a single 74HC595D,112, you can control up to 8 outputs. However, by daisy-chaining multiple chips, you can control even more outputs.

  6. Q: Can I use the 74HC595D,112 with both 3.3V and 5V microcontrollers? A: Yes, the 74HC595D,112 is compatible with both 3.3V and 5V microcontrollers. It has a wide operating voltage range of 2V to 6V.

  7. Q: How do I connect the 74HC595D,112 to a microcontroller? A: The 74HC595D,112 requires three control signals: serial data input (SER), clock input (SRCLK), and latch enable (RCLK). These signals need to be connected to appropriate pins on the microcontroller.

  8. Q: Can I use the 74HC595D,112 to drive high-power devices like motors? A: No, the 74HC595D,112 is not designed to directly drive high-power devices. It can only provide a limited amount of current per output pin. You may need additional driver circuits or transistors to control high-power devices.

  9. Q: Are there any limitations to the maximum current that can be sourced or sunk by the outputs of the 74HC595D,112? A: Yes, the maximum current that can be sourced or sunk by each output pin of the 74HC595D,112 is typically around 6 mA. Exceeding this limit can damage the chip.

  10. Q: Are there any specific precautions I should take when using the 74HC595D,112? A: It is important to ensure that the voltage levels of the signals connected to the 74HC595D,112 are within its specified operating range. Additionally, avoid short-circuits and static discharge while handling the chip to prevent damage.

Please note that these answers are general and may vary depending on the specific application and datasheet of the 74HC595D,112. Always refer to the manufacturer's documentation for accurate information.