Nexperia USA Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
74HCT573PW,112
Näytä Yksityiskohdat DataSheets

74HCT573PW,112

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Octal D-type transparent latch with 3-state outputs
  • Characteristics: High-speed operation, wide operating voltage range, 3-state outputs, latch enable input, transparent latch operation
  • Package: TSSOP20
  • Essence: The 74HCT573PW,112 is a versatile integrated circuit that provides an octal D-type transparent latch with 3-state outputs. It is widely used in digital systems for data storage and transfer.

Specifications

  • Supply Voltage Range: 2.0V to 6.0V
  • Input Voltage Range: -0.5V to VCC + 0.5V
  • Output Voltage Range: -0.5V to VCC + 0.5V
  • Operating Temperature Range: -40°C to +125°C
  • Output Current: ±6mA
  • Propagation Delay: 13ns (typical)

Pin Configuration

The 74HCT573PW,112 has a total of 20 pins. Here is the detailed pin configuration:

  1. GND: Ground
  2. Q0: Output 0
  3. Q1: Output 1
  4. Q2: Output 2
  5. Q3: Output 3
  6. Q4: Output 4
  7. Q5: Output 5
  8. Q6: Output 6
  9. Q7: Output 7
  10. LE: Latch Enable
  11. D0: Data Input 0
  12. D1: Data Input 1
  13. D2: Data Input 2
  14. D3: Data Input 3
  15. D4: Data Input 4
  16. D5: Data Input 5
  17. D6: Data Input 6
  18. D7: Data Input 7
  19. OE: Output Enable
  20. VCC: Supply Voltage

Functional Features

  • Octal D-type transparent latch with 3-state outputs
  • Latch enable input for controlling the storage of data
  • Transparent latch operation allows data to be transferred when the latch enable is high
  • 3-state outputs provide flexibility in connecting multiple devices and bus systems

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transfer - Wide operating voltage range allows compatibility with various systems - 3-state outputs provide flexibility in system design - Transparent latch operation simplifies data transfer process

Disadvantages: - Limited output current may restrict use in certain applications - Propagation delay may affect timing-sensitive systems

Working Principles

The 74HCT573PW,112 operates as an octal D-type transparent latch with 3-state outputs. When the latch enable (LE) input is high, the data inputs (D0-D7) are transferred to the outputs (Q0-Q7). The latch remains transparent as long as the LE input is high, allowing continuous data transfer. When the LE input is low, the outputs are latched and hold the last transferred data.

The output enable (OE) input controls the 3-state outputs. When OE is high, the outputs are enabled and can drive external circuitry. When OE is low, the outputs are in a high-impedance state, effectively disconnecting them from the external circuitry.

Detailed Application Field Plans

The 74HCT573PW,112 finds applications in various digital systems where data storage and transfer are required. Some common application fields include:

  1. Microcontrollers and microprocessors
  2. Memory systems
  3. Communication systems
  4. Industrial automation
  5. Automotive electronics
  6. Consumer electronics

Detailed and Complete Alternative Models

  • 74HC573: Similar octal D-type transparent latch with 3-state outputs, but operates at a higher voltage range (2.0V to 6.0V)
  • SN74LS373: Octal D-type transparent latch with 3-state outputs, operates at a lower voltage range (4.75V to 5.25V), and has different pin configuration
  • CD74HCT573E: Octal D-type transparent latch with 3-state outputs, operates at a similar voltage range (2.0V to 6.0V), and has a different package (PDIP20)

These alternative models provide similar functionality to the 74HCT573PW,112 and can be used as replacements depending on specific requirements.

Word count: 511 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 74HCT573PW,112 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of 74HCT573PW,112 in technical solutions:

  1. Q: What is the function of the 74HCT573PW,112? A: The 74HCT573PW,112 is an octal transparent latch with 3-state outputs. It can be used to store and control the flow of data in digital circuits.

  2. Q: What is the operating voltage range for the 74HCT573PW,112? A: The operating voltage range for the 74HCT573PW,112 is typically between 4.5V and 5.5V.

  3. Q: How many bits can the 74HCT573PW,112 latch store? A: The 74HCT573PW,112 can store 8 bits of data, as it is an octal latch.

  4. Q: Can the 74HCT573PW,112 be used in both parallel and serial data transfer applications? A: Yes, the 74HCT573PW,112 can be used in both parallel and serial data transfer applications, depending on the configuration and connection.

  5. Q: What is the maximum clock frequency that the 74HCT573PW,112 can handle? A: The 74HCT573PW,112 can typically handle clock frequencies up to 25 MHz.

  6. Q: Does the 74HCT573PW,112 have any built-in protection features? A: Yes, the 74HCT573PW,112 has built-in diode clamps to protect against electrostatic discharge (ESD) and overvoltage.

  7. Q: Can the 74HCT573PW,112 drive LEDs directly? A: No, the 74HCT573PW,112 is not designed to drive LEDs directly. It requires additional current-limiting resistors or drivers for LED applications.

  8. Q: What is the power consumption of the 74HCT573PW,112? A: The power consumption of the 74HCT573PW,112 depends on various factors such as supply voltage, clock frequency, and output load. Refer to the datasheet for detailed information.

  9. Q: Can multiple 74HCT573PW,112 latches be cascaded together? A: Yes, multiple 74HCT573PW,112 latches can be cascaded together to increase the number of bits that can be stored.

  10. Q: Are there any specific precautions to consider when using the 74HCT573PW,112? A: It is important to ensure proper decoupling capacitors are used near the power supply pins, avoid exceeding the maximum ratings, and follow the recommended operating conditions mentioned in the datasheet.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. Always refer to the datasheet and consult with a qualified engineer for accurate information.