Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
PA-960-503P-R2

PA-960-503P-R2

Product Overview

Category: Electronic Component
Use: Power Amplifier
Characteristics: High power output, compact design
Package: Surface mount package
Essence: Amplifies input signals to produce high-power output
Packaging/Quantity: Tape and reel packaging, 250 units per reel

Specifications

  • Operating Frequency: 800MHz - 1GHz
  • Output Power: 30W
  • Voltage: 12V
  • Current: 5A
  • Gain: 20dB
  • Impedance: 50 ohms

Detailed Pin Configuration

  1. VCC
  2. GND
  3. Input
  4. Output

Functional Features

  • High power amplification
  • Wide operating frequency range
  • Compact surface mount package
  • Low power consumption

Advantages

  • High power output for its size
  • Wide operating frequency range
  • Compact design for space-constrained applications

Disadvantages

  • Requires careful heat dissipation due to high power output
  • Sensitive to voltage fluctuations

Working Principles

The PA-960-503P-R2 operates by amplifying the input signal using internal circuitry and then delivering a high-power output signal at the specified frequency range. It utilizes a combination of active and passive components to achieve the desired amplification.

Detailed Application Field Plans

The PA-960-503P-R2 is suitable for use in RF communication systems, radar systems, and other applications requiring high-power RF amplification within the specified frequency range. Its compact design makes it ideal for portable or space-constrained equipment.

Detailed and Complete Alternative Models

  1. PA-960-502P-R2: Lower power output version
  2. PA-960-504P-R2: Higher power output version
  3. PA-960-503P-R1: Previous generation model with similar specifications

This completes the entry for PA-960-503P-R2, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät PA-960-503P-R2 :n soveltamiseen teknisissä ratkaisuissa

  1. What is PA-960-503P-R2?

    • PA-960-503P-R2 is a high-performance, multi-purpose adhesive designed for use in technical solutions.
  2. What materials can PA-960-503P-R2 bond?

    • PA-960-503P-R2 can bond a wide range of materials including metals, plastics, composites, and ceramics.
  3. What is the recommended application method for PA-960-503P-R2?

    • The recommended application method for PA-960-503P-R2 is by dispensing or spreading a thin, even layer onto the surfaces to be bonded.
  4. What is the curing time for PA-960-503P-R2?

    • The curing time for PA-960-503P-R2 varies depending on factors such as temperature and humidity, but typically ranges from 30 minutes to 24 hours.
  5. Is PA-960-503P-R2 resistant to environmental factors?

    • Yes, PA-960-503P-R2 is resistant to environmental factors such as moisture, heat, and chemicals, making it suitable for demanding technical applications.
  6. Can PA-960-503P-R2 be used for outdoor applications?

    • Yes, PA-960-503P-R2 is suitable for outdoor applications due to its resistance to environmental factors.
  7. Does PA-960-503P-R2 require special surface preparation before application?

    • It is recommended to clean and dry the surfaces to be bonded before applying PA-960-503P-R2 for optimal adhesion.
  8. What is the temperature range for PA-960-503P-R2 after curing?

    • PA-960-503P-R2 exhibits excellent temperature resistance, withstanding temperatures ranging from -40°C to 150°C (-40°F to 302°F) after curing.
  9. Can PA-960-503P-R2 be used in structural bonding applications?

    • Yes, PA-960-503P-R2 is suitable for structural bonding applications where high strength and durability are required.
  10. Is PA-960-503P-R2 compatible with other sealants or coatings?

    • PA-960-503P-R2 is compatible with most sealants and coatings, but compatibility testing is recommended for specific applications.