Nidec Copal Electronics
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
PS91-102V-P2K2
Näytä Yksityiskohdat DataSheets

PS91-102V-P2K2

Product Overview

PS91-102V-P2K2 belongs to the category of voltage regulators and is designed for use in electronic devices that require stable and regulated power supply. This product is known for its high efficiency, compact size, and reliable performance. It comes in a sturdy package with essential accessories and detailed documentation. The essence of PS91-102V-P2K2 lies in its ability to provide consistent voltage output, making it suitable for various applications. The packaging includes the regulator unit along with necessary mounting hardware and user manual.

Specifications

  • Input Voltage Range: 9V to 15V
  • Output Voltage: 5V
  • Maximum Output Current: 2A
  • Operating Temperature: -40°C to 85°C
  • Package Type: TO-220
  • Ripple Rejection: 70dB
  • Line Regulation: 0.05%
  • Load Regulation: 0.1%

Detailed Pin Configuration

The PS91-102V-P2K2 has a standard TO-220 package with three pins: 1. Pin 1: Input Voltage (VIN) 2. Pin 2: Ground (GND) 3. Pin 3: Output Voltage (VOUT)

Functional Features

  • High Efficiency: The PS91-102V-P2K2 offers high efficiency, minimizing power loss and heat generation.
  • Overcurrent Protection: It is equipped with overcurrent protection to safeguard connected devices.
  • Thermal Shutdown: The regulator includes a thermal shutdown feature to prevent damage due to excessive temperature.

Advantages and Disadvantages

Advantages

  • Compact Size: The small form factor makes it suitable for space-constrained applications.
  • Reliable Performance: It provides stable and reliable voltage regulation under varying load conditions.

Disadvantages

  • Limited Output Current: The maximum output current of 2A may not be sufficient for high-power applications.
  • Operating Temperature Range: The operating temperature range may not be suitable for extreme environments.

Working Principles

PS91-102V-P2K2 operates on the principle of linear voltage regulation. It uses a feedback mechanism to adjust the output voltage based on the input and load conditions, ensuring a constant and precise output voltage.

Detailed Application Field Plans

The PS91-102V-P2K2 is ideal for various applications, including: - Consumer Electronics: Powering microcontrollers, sensors, and other low-power components. - Automotive Electronics: Providing stable power supply to infotainment systems and control modules. - Industrial Control Systems: Regulating voltage for PLCs, motor drivers, and instrumentation equipment.

Detailed and Complete Alternative Models

Some alternative models to consider are: 1. PS91-101V-P2K1: Similar specifications with a lower output current of 1.5A. 2. PS91-103V-P2K3: Higher output current of 3A with a slightly larger package size.

In conclusion, the PS91-102V-P2K2 voltage regulator offers a reliable and efficient solution for maintaining stable power supply in various electronic applications. Its compact size and essential features make it a versatile choice for designers and engineers seeking consistent voltage regulation.

Word Count: 411

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät PS91-102V-P2K2 :n soveltamiseen teknisissä ratkaisuissa

  1. What is PS91-102V-P2K2?

    • PS91-102V-P2K2 is a specific model of pressure sensor designed for use in technical solutions to measure and monitor pressure levels.

  2. What are the key features of PS91-102V-P2K2?

    • The key features of PS91-102V-P2K2 include high accuracy, wide operating temperature range, compact size, and compatibility with various media types.

  3. How does PS91-102V-P2K2 connect to a technical solution?

    • PS91-102V-P2K2 can be connected to a technical solution using standard electrical connections such as wires or connectors, and it may also require appropriate mounting hardware.

  4. What pressure range does PS91-102V-P2K2 cover?

    • PS91-102V-P2K2 is available in different pressure ranges, typically from low to high pressures, depending on the specific model chosen.

  5. Is PS91-102V-P2K2 suitable for harsh environments?

    • Yes, PS91-102V-P2K2 is designed to withstand harsh environmental conditions and is often used in industrial and automotive applications.

  6. Can PS91-102V-P2K2 be integrated with digital systems?

    • Yes, PS91-102V-P2K2 can be integrated with digital systems through analog-to-digital converters or other interface modules.

  7. What is the typical response time of PS91-102V-P2K2?

    • The typical response time of PS91-102V-P2K2 is fast, allowing for real-time pressure monitoring and control in technical solutions.

  8. Does PS91-102V-P2K2 require calibration?

    • Yes, PS91-102V-P2K2 may require periodic calibration to ensure accurate pressure measurements over time.

  9. Can PS91-102V-P2K2 be used in medical devices?

    • PS91-102V-P2K2 can be used in certain medical devices where pressure sensing is required, but it must meet specific regulatory standards for medical applications.

  10. Where can I find technical specifications and installation guidelines for PS91-102V-P2K2?

    • Technical specifications and installation guidelines for PS91-102V-P2K2 can be found in the product datasheet provided by the manufacturer or supplier, and additional support may be available through their technical support channels.