NVE Corp/Sensor Products
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
AD706-00E
Näytä Yksityiskohdat DataSheets

AD706-00E

Product Overview

The AD706-00E belongs to the category of operational amplifiers (op-amps) and is widely used in electronic circuits for signal processing and amplification. Known for its high precision and low noise characteristics, this op-amp is commonly utilized in audio equipment, instrumentation, and control systems. The AD706-00E comes in a small package with essential features that make it suitable for various applications.

Basic Information

  • Category: Operational Amplifier
  • Use: Signal processing and amplification
  • Characteristics: High precision, low noise
  • Package: Small form factor
  • Essence: Reliable and accurate signal amplification
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Supply Voltage: ±5V to ±18V
  • Input Offset Voltage: 0.3mV maximum
  • Gain Bandwidth Product: 1MHz
  • Slew Rate: 0.6V/µs
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The AD706-00E op-amp has a standard pin configuration with the following layout: 1. Non-Inverting Input (+) 2. Inverting Input (-) 3. Output 4. V- 5. Offset Null 6. V+ 7. NC (No Connection) 8. NC (No Connection)

Functional Features

  • Low input offset voltage
  • High open-loop gain
  • Wide supply voltage range
  • Low input bias current
  • Unity-gain stable

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Low noise performance
  • Versatile and reliable
  • Wide operating temperature range

Disadvantages

  • Limited gain bandwidth product compared to some alternatives
  • Higher power consumption in certain applications

Working Principles

The AD706-00E operates based on the principles of differential amplification and feedback control. It amplifies the voltage difference between its two input terminals while maintaining stability and linearity across a wide range of operating conditions.

Detailed Application Field Plans

The AD706-00E finds extensive use in the following application fields: - Audio signal processing and amplification - Instrumentation and measurement equipment - Control systems and automation - Sensor signal conditioning

Detailed and Complete Alternative Models

Some alternative models to the AD706-00E include: - AD711 - AD712 - AD713 - AD715

In summary, the AD706-00E operational amplifier offers high precision and low noise characteristics, making it suitable for a wide range of signal processing and amplification applications. Its compact package and versatile performance make it a popular choice among electronic designers and engineers.

Word Count: 411

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät AD706-00E :n soveltamiseen teknisissä ratkaisuissa

  1. What is the AD706-00E?

    • The AD706-00E is a precision, low power, high speed, dual operational amplifier that is commonly used in various technical solutions.

  2. What are the key features of the AD706-00E?

    • The AD706-00E features low offset voltage, low input bias current, high open-loop gain, and low noise, making it suitable for precision applications.

  3. What are the typical applications of the AD706-00E?

    • Typical applications include active filters, instrumentation amplifiers, precision integrators, and data acquisition systems.

  4. What is the supply voltage range for the AD706-00E?

    • The AD706-00E operates from a single or dual power supply ranging from ±2.25 V to ±18 V.

  5. What is the input offset voltage of the AD706-00E?

    • The input offset voltage is typically 150 µV, which is crucial for precision applications.

  6. Does the AD706-00E have thermal shutdown protection?

    • No, the AD706-00E does not have built-in thermal shutdown protection.

  7. What is the maximum output current of the AD706-00E?

    • The maximum output current is ±20 mA, allowing it to drive a wide range of loads.

  8. Is the AD706-00E suitable for low power applications?

    • Yes, the AD706-00E has low power consumption, making it suitable for battery-powered and portable devices.

  9. What is the temperature range for the AD706-00E?

    • The AD706-00E operates over a temperature range of -40°C to +125°C, ensuring its suitability for various environments.

  10. Can the AD706-00E be used in audio applications?

    • Yes, the AD706-00E can be used in audio applications such as audio preamplifiers and equalizers due to its low noise and high bandwidth characteristics.