NXP USA Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MPC8347EVVAJD
Näytä Yksityiskohdat DataSheets

MPC8347EVVAJD

Product Overview

Category

MPC8347EVVAJD belongs to the category of microprocessors.

Use

This product is primarily used in embedded systems and networking applications.

Characteristics

  • High-performance microprocessor
  • Power-efficient design
  • Integrated peripherals for enhanced functionality
  • Suitable for various networking protocols

Package

MPC8347EVVAJD is available in a compact and durable package, ensuring easy integration into different systems.

Essence

The essence of MPC8347EVVAJD lies in its ability to provide reliable processing power and efficient networking capabilities.

Packaging/Quantity

This product is typically packaged individually and is available in varying quantities depending on customer requirements.

Specifications

  • Architecture: PowerPC e300 Core
  • Clock Speed: Up to 667 MHz
  • Cache: L1 Instruction Cache (32 KB), L1 Data Cache (32 KB)
  • Memory Interface: DDR2, SDRAM
  • Ethernet: 10/100/1000 Mbps
  • USB: 2.0
  • Serial Interfaces: UART, SPI, I2C
  • GPIO: General Purpose Input/Output pins
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of MPC8347EVVAJD is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power Supply Voltage | | 2 | GND | Ground | | 3 | RESET | Reset Signal | | 4 | CLKIN | External Clock Input | | 5 | IRQ | Interrupt Request | | ... | ... | ... |

Functional Features

  • High-performance processing capabilities
  • Integrated memory controller for efficient data access
  • Multiple communication interfaces for connectivity
  • Support for various networking protocols
  • Power-efficient design for reduced energy consumption

Advantages and Disadvantages

Advantages

  • High processing power for demanding applications
  • Integrated peripherals reduce the need for additional components
  • Suitable for a wide range of networking applications
  • Power-efficient design helps in reducing overall system power consumption

Disadvantages

  • Limited availability of alternative models
  • May require additional support components for specific applications
  • Higher cost compared to lower-end microprocessors

Working Principles

MPC8347EVVAJD operates on the PowerPC e300 core architecture. It utilizes a combination of high-performance processing units, integrated peripherals, and efficient memory access to deliver reliable performance in embedded systems and networking applications.

The microprocessor executes instructions fetched from the memory, performs data processing tasks, and communicates with external devices through various interfaces. Its working principle revolves around efficient data flow, optimized resource utilization, and reliable communication.

Detailed Application Field Plans

MPC8347EVVAJD finds extensive application in the following fields:

  1. Networking equipment such as routers, switches, and gateways
  2. Industrial automation systems
  3. Telecommunication infrastructure
  4. Embedded systems for automotive applications
  5. Network-attached storage (NAS) devices

Detailed and Complete Alternative Models

While MPC8347EVVAJD is a highly capable microprocessor, there are alternative models available in the market that offer similar functionality. Some notable alternatives include:

  1. Freescale MPC8360E: Offers higher clock speed and enhanced peripheral integration.
  2. NXP QorIQ P1020: Provides improved power efficiency and advanced security features.
  3. Texas Instruments AM335x: Suitable for low-power embedded applications with integrated graphics capabilities.

These alternative models can be considered based on specific project requirements and desired features.

In conclusion, MPC8347EVVAJD is a high-performance microprocessor designed for embedded systems and networking applications. Its powerful processing capabilities, integrated peripherals, and efficient design make it a suitable choice for various industries. While it has certain limitations, alternative models are available to cater to specific needs.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MPC8347EVVAJD :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MPC8347EVVAJD in technical solutions:

  1. Q: What is the MPC8347EVVAJD? A: The MPC8347EVVAJD is a highly integrated system-on-chip (SoC) designed for embedded applications, offering a PowerPC processor core, various peripherals, and advanced connectivity options.

  2. Q: What are the key features of the MPC8347EVVAJD? A: The key features include a 400 MHz PowerPC e300 core, DDR2 memory controller, Ethernet MACs, USB ports, PCI interface, UARTs, I2C, SPI, and GPIOs.

  3. Q: What are some typical applications of the MPC8347EVVAJD? A: The MPC8347EVVAJD is commonly used in networking equipment, industrial automation, telecommunications systems, storage devices, and other embedded applications requiring high-performance processing and connectivity.

  4. Q: What operating systems are supported by the MPC8347EVVAJD? A: The MPC8347EVVAJD supports various operating systems such as Linux, VxWorks, QNX, and others that can be ported to the PowerPC architecture.

  5. Q: How much power does the MPC8347EVVAJD consume? A: The power consumption of the MPC8347EVVAJD depends on the specific configuration and usage scenario. It typically ranges from 1.5W to 3W.

  6. Q: Can the MPC8347EVVAJD handle real-time tasks? A: Yes, the MPC8347EVVAJD's PowerPC core supports real-time operations and can be utilized for time-critical applications with appropriate software design.

  7. Q: What interfaces does the MPC8347EVVAJD support for external connectivity? A: The MPC8347EVVAJD supports interfaces such as Ethernet (10/100/1000 Mbps), USB 2.0, PCI, UARTs, I2C, SPI, and GPIOs, enabling seamless integration with various peripherals and networks.

  8. Q: What is the maximum memory capacity supported by the MPC8347EVVAJD? A: The MPC8347EVVAJD can address up to 4 GB of DDR2 SDRAM, providing ample memory capacity for most embedded applications.

  9. Q: Can the MPC8347EVVAJD be used in harsh environments? A: Yes, the MPC8347EVVAJD is designed to operate reliably in industrial temperature ranges (-40°C to +85°C) and can withstand challenging environmental conditions.

  10. Q: Are development tools available for programming and debugging the MPC8347EVVAJD? A: Yes, there are various development tools available, including compilers, debuggers, and integrated development environments (IDEs), which facilitate software development and debugging for the MPC8347EVVAJD platform.

Please note that these answers are general and may vary depending on specific implementations and requirements.