NXP USA Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MPXY8021A6T1
Näytä Yksityiskohdat DataSheets

MPXY8021A6T1

Introduction

The MPXY8021A6T1 is a sensor product belonging to the category of pressure sensors. This device is widely used in various applications to measure and monitor pressure levels in different systems. The following entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MPXY8021A6T1.

Basic Information Overview

  • Category: Pressure Sensor
  • Use: Measurement and monitoring of pressure levels
  • Characteristics: High accuracy, compact size, low power consumption
  • Package: Surface-mount package
  • Essence: Accurate pressure sensing for diverse applications
  • Packaging/Quantity: Typically available in reels of 2500 units

Specifications

  • Pressure Range: 0 to 100 kPa
  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature: -40°C to 125°C
  • Output Type: Analog Voltage
  • Accuracy: ±1.5% full scale

Detailed Pin Configuration

The MPXY8021A6T1 features a standard 8-pin surface-mount package with the following pin configuration: 1. VDD (Power Supply) 2. VSS (Ground) 3. VOUT (Analog Output) 4. NC (No Connection) 5. NC (No Connection) 6. NC (No Connection) 7. MISO (Serial Data Output) 8. SCLK (Serial Clock Input)

Functional Features

  • High Accuracy: Provides precise pressure measurements
  • Low Power Consumption: Suitable for battery-powered devices
  • Small Form Factor: Enables integration into compact designs
  • Analog Output: Compatible with various microcontrollers and data acquisition systems

Advantages and Disadvantages

Advantages

  • Accurate pressure sensing
  • Low power consumption
  • Compact size

Disadvantages

  • Limited pressure range
  • Analog output may require additional signal conditioning

Working Principles

The MPXY8021A6T1 operates based on the principle of piezoresistive sensing. When pressure is applied, the internal resistors change their values, resulting in a corresponding change in the output voltage. This voltage is then proportional to the applied pressure, providing an accurate representation of the pressure level.

Detailed Application Field Plans

The MPXY8021A6T1 is suitable for a wide range of applications, including: - Medical Devices: Blood pressure monitors, respiratory equipment - Automotive Systems: Tire pressure monitoring, engine management - Industrial Automation: Hydraulic systems, pneumatic controls - Consumer Electronics: Smartphones, wearables

Detailed and Complete Alternative Models

Some alternative models to the MPXY8021A6T1 include: - MPX5700AP: Offers a wider pressure range - MPXV5010GC6U: Digital output interface for simplified integration - MPXHZ6250AC6T1: High-temperature operation capability

In conclusion, the MPXY8021A6T1 is a versatile pressure sensor with high accuracy and low power consumption, making it suitable for diverse applications across various industries.

[Word Count: 460]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MPXY8021A6T1 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the MPXY8021A6T1?

    • The MPXY8021A6T1 is a pressure sensor designed for use in automotive and industrial applications.

  2. What is the operating voltage range of the MPXY8021A6T1?

    • The operating voltage range of the MPXY8021A6T1 is typically 4.75V to 5.25V.

  3. What is the pressure range that the MPXY8021A6T1 can measure?

    • The MPXY8021A6T1 can measure pressure within the range of 15 to 115 kPa.

  4. What output does the MPXY8021A6T1 provide?

    • The MPXY8021A6T1 provides a digital output in the form of a pulse-width modulated (PWM) signal.

  5. Is the MPXY8021A6T1 suitable for harsh environments?

    • Yes, the MPXY8021A6T1 is designed to be robust and can withstand harsh environmental conditions.

  6. What is the accuracy of the MPXY8021A6T1?

    • The MPXY8021A6T1 has a typical accuracy of ±1.5% over its specified temperature range.

  7. Can the MPXY8021A6T1 be used for liquid pressure measurement?

    • No, the MPXY8021A6T1 is specifically designed for air and non-corrosive gas pressure measurement.

  8. What is the response time of the MPXY8021A6T1?

    • The response time of the MPXY8021A6T1 is typically less than 1 millisecond.

  9. Does the MPXY8021A6T1 require calibration?

    • The MPXY8021A6T1 is factory calibrated and typically does not require user calibration.

  10. What are some common applications for the MPXY8021A6T1?

    • Common applications for the MPXY8021A6T1 include tire pressure monitoring systems, HVAC systems, and industrial automation.