N74F573DB,112
Product Overview
- Category: Integrated Circuit (IC)
- Use: Digital Logic
- Characteristics: Octal transparent latch with 3-state outputs
- Package: SOIC (Small Outline Integrated Circuit)
- Essence: Latch with output enable functionality
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Logic Family: N74F
- Number of Bits: 8
- Input Voltage Range: 0V to 5.5V
- Output Voltage Range: 0V to 5.5V
- Operating Temperature Range: -40°C to +85°C
- Supply Voltage Range: 4.5V to 5.5V
- Propagation Delay Time: 6 ns (typical)
- Output Current: ±24 mA
Detailed Pin Configuration
The N74F573DB,112 has a total of 20 pins. The pin configuration is as follows:
- D0 (Data Input 0)
- D1 (Data Input 1)
- D2 (Data Input 2)
- D3 (Data Input 3)
- D4 (Data Input 4)
- D5 (Data Input 5)
- D6 (Data Input 6)
- D7 (Data Input 7)
- GND (Ground)
- OE (Output Enable)
- Q0 (Output 0)
- Q1 (Output 1)
- Q2 (Output 2)
- Q3 (Output 3)
- Q4 (Output 4)
- Q5 (Output 5)
- Q6 (Output 6)
- Q7 (Output 7)
- VCC (Supply Voltage)
- NC (No Connection)
Functional Features
- Octal transparent latch with 3-state outputs
- Output enable functionality allows the outputs to be disabled
- High-speed operation with low power consumption
- Wide operating voltage range
- TTL-compatible inputs and outputs
- Direct interface with microcontrollers and other digital logic circuits
Advantages and Disadvantages
Advantages: - Provides a latch function for storing data - Allows for easy interfacing with other digital components - Offers output enable functionality for flexible control of outputs - High-speed operation enables efficient data transfer
Disadvantages: - Limited number of bits (8) may not be sufficient for certain applications requiring larger data storage - Requires external pull-up resistors for proper operation in some cases
Working Principles
The N74F573DB,112 is an octal transparent latch with 3-state outputs. It operates by latching the input data when the latch enable (LE) signal is high. The output enable (OE) signal controls the state of the outputs. When OE is low, the outputs are enabled and reflect the latched input data. When OE is high, the outputs are in a high-impedance state.
Detailed Application Field Plans
The N74F573DB,112 can be used in various applications, including but not limited to:
- Microprocessor-based systems
- Data storage and retrieval systems
- Communication systems
- Industrial automation
- Control systems
- Digital signal processing
- Memory modules
- Test and measurement equipment
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the N74F573DB,112 include:
- SN74LS373: Octal D-type transparent latch with 3-state outputs
- CD74HC573: Octal transparent latch with 3-state outputs
- MC74ACT573: Octal D-type latch with 3-state outputs
- 74HC573: Octal D-type transparent latch with 3-state outputs
These alternative models can be considered based on specific requirements and compatibility with existing systems.
Word count: 498 words
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät N74F573DB,112 :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of N74F573DB,112 in technical solutions:
Q: What is N74F573DB,112? A: N74F573DB,112 is a type of integrated circuit (IC) commonly used as an octal transparent latch with 3-state outputs.
Q: What is the purpose of N74F573DB,112 in a technical solution? A: The N74F573DB,112 is used to store and control data in digital systems. It can be used for various applications such as data buffering, address decoding, and bus interfacing.
Q: How many latches does N74F573DB,112 have? A: N74F573DB,112 has eight individual latches, making it suitable for handling multiple bits of data simultaneously.
Q: What is the maximum voltage that N74F573DB,112 can handle? A: N74F573DB,112 can handle a maximum voltage of 5.5 volts.
Q: Can N74F573DB,112 be used in both parallel and serial data transfer applications? A: Yes, N74F573DB,112 can be used in both parallel and serial data transfer applications, depending on the design and configuration of the system.
Q: Does N74F573DB,112 support bidirectional data flow? A: No, N74F573DB,112 supports unidirectional data flow only. It can either receive or transmit data but not both simultaneously.
Q: What is the power supply range for N74F573DB,112? A: N74F573DB,112 operates within a power supply range of 4.5 to 5.5 volts.
Q: Can N74F573DB,112 handle high-speed data transfers? A: Yes, N74F573DB,112 is designed to operate at high speeds and can handle fast data transfers in digital systems.
Q: Does N74F573DB,112 have any built-in protection features? A: N74F573DB,112 does not have built-in protection features. It is important to ensure proper voltage levels and signal integrity to prevent damage.
Q: Are there any specific precautions to consider when using N74F573DB,112? A: It is important to follow the recommended operating conditions, such as voltage levels and temperature ranges, provided in the datasheet. Additionally, proper decoupling capacitors should be used to minimize noise and ensure stable operation.
Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.