NXP USA Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
PCA9515DP,118
Näytä Yksityiskohdat DataSheets

PCA9515DP,118

Product Overview

Category

PCA9515DP,118 belongs to the category of integrated circuits (ICs).

Use

The PCA9515DP,118 is commonly used as a level translator and voltage-level shifter.

Characteristics

  • The device operates at a wide supply voltage range, making it suitable for various applications.
  • It provides bidirectional voltage translation between different logic levels.
  • The PCA9515DP,118 has built-in overvoltage tolerance, ensuring reliable operation in demanding environments.
  • It features low standby current consumption, making it energy-efficient.

Package

The PCA9515DP,118 is available in a small outline package (SOP) with 8 pins.

Essence

The essence of PCA9515DP,118 lies in its ability to facilitate communication between devices operating at different voltage levels.

Packaging/Quantity

The PCA9515DP,118 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 2.3V to 5.5V
  • Logic Voltage Levels: 1.2V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Data Rate: 400kHz
  • Standby Current: 10µA (typical)

Detailed Pin Configuration

The PCA9515DP,118 has the following pin configuration:

  1. SDA1: Bidirectional I2C data line for channel 1.
  2. SCL1: Input/output clock line for channel 1.
  3. VREF1: Reference voltage for channel 1.
  4. GND: Ground connection.
  5. VCC: Positive power supply.
  6. SDA2: Bidirectional I2C data line for channel 2.
  7. SCL2: Input/output clock line for channel 2.
  8. VREF2: Reference voltage for channel 2.

Functional Features

  • Bidirectional voltage translation between two I2C buses operating at different voltage levels.
  • Automatic direction sensing and control.
  • Overvoltage tolerance for robust operation.
  • Low standby current consumption for energy efficiency.

Advantages and Disadvantages

Advantages

  • Enables communication between devices with different voltage levels.
  • Wide supply voltage range allows for versatile applications.
  • Built-in overvoltage tolerance ensures reliability.
  • Low standby current consumption for energy efficiency.

Disadvantages

  • Limited to I2C bus communication.
  • Maximum data rate of 400kHz may not be sufficient for high-speed applications.

Working Principles

The PCA9515DP,118 operates by monitoring the voltage levels on its input channels (SDA1/SCL1 and SDA2/SCL2) and automatically adjusting the direction of data flow accordingly. It translates the logic levels between the two channels, allowing devices operating at different voltage levels to communicate seamlessly.

Detailed Application Field Plans

The PCA9515DP,118 finds applications in various fields, including:

  1. Industrial automation: Facilitating communication between devices with different voltage requirements in industrial control systems.
  2. Consumer electronics: Enabling interoperability between devices operating at different logic levels, such as smartphones, tablets, and peripherals.
  3. Automotive electronics: Supporting communication between components with varying voltage levels in automotive systems.
  4. Internet of Things (IoT): Bridging the gap between IoT devices with different voltage requirements, enhancing connectivity and compatibility.

Detailed and Complete Alternative Models

  1. PCA9306: Similar bidirectional I2C voltage-level translator with automatic direction sensing.
  2. TXB0108: Octal bidirectional voltage-level translator with configurable voltage levels.
  3. SN74LVC4245A: Octal dual-supply bus transceiver with voltage-level translation capabilities.

These alternative models offer similar functionality to the PCA9515DP,118 and can be considered as alternatives based on specific application requirements.

Word count: 534 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät PCA9515DP,118 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of PCA9515DP,118:

  1. Q: What is PCA9515DP,118? A: PCA9515DP,118 is a level-translating I2C-bus repeater that provides bidirectional voltage-level translation between low-voltage (down to 0.9V) and higher-voltage (up to 5.5V) I2C-bus or SMBus applications.

  2. Q: What is the purpose of PCA9515DP,118? A: The purpose of PCA9515DP,118 is to enable communication between devices operating at different voltage levels in an I2C-bus or SMBus system.

  3. Q: How many channels does PCA9515DP,118 have? A: PCA9515DP,118 has two bidirectional channels, allowing it to translate voltage levels for two separate I2C-bus or SMBus lines.

  4. Q: What is the maximum data rate supported by PCA9515DP,118? A: PCA9515DP,118 supports a maximum data rate of 400 kHz.

  5. Q: Can PCA9515DP,118 be used as a level shifter for other protocols besides I2C-bus and SMBus? A: No, PCA9515DP,118 is specifically designed for level translation in I2C-bus and SMBus applications and may not be suitable for other protocols.

  6. Q: What is the supply voltage range for PCA9515DP,118? A: PCA9515DP,118 operates with a supply voltage range from 1.65V to 5.5V.

  7. Q: Does PCA9515DP,118 require external pull-up resistors? A: Yes, PCA9515DP,118 requires external pull-up resistors on the SDA and SCL lines.

  8. Q: Can PCA9515DP,118 be used in a hot-swappable system? A: Yes, PCA9515DP,118 supports hot-swapping of devices without causing bus contention or data corruption.

  9. Q: Is PCA9515DP,118 compatible with both 3.3V and 5V systems? A: Yes, PCA9515DP,118 is compatible with both 3.3V and 5V systems, making it versatile for various applications.

  10. Q: Are there any application notes or reference designs available for PCA9515DP,118? A: Yes, NXP provides application notes and reference designs that can help in understanding and implementing PCA9515DP,118 in different technical solutions.