NXP USA Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
PDTC144VS,126
Näytä Yksityiskohdat DataSheets

PDTC144VS,126

Product Overview

Category

The PDTC144VS,126 belongs to the category of semiconductor devices.

Use

It is used as a voltage suppressor for electronic circuits.

Characteristics

  • Fast response time
  • Low clamping voltage
  • High surge current capability

Package

The PDTC144VS,126 is available in a SOT666 package.

Essence

This device provides protection against voltage spikes and transients in electronic circuits.

Packaging/Quantity

It is typically packaged in reels with a quantity of 3000 units per reel.

Specifications

  • Maximum Working Voltage: 12V
  • Clamping Voltage: 19.9V at 1A
  • Peak Pulse Current: 5A
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The PDTC144VS,126 has a SOT666 package with the following pin configuration: 1. Pin 1: Cathode 2. Pin 2: Anode 3. Pin 3: Not connected 4. Pin 4: Cathode 5. Pin 5: Anode 6. Pin 6: Not connected

Functional Features

  • Provides transient voltage suppression
  • Protects sensitive electronic components
  • Fast response to voltage spikes

Advantages

  • Small form factor
  • High surge current capability
  • Low clamping voltage

Disadvantages

  • Limited maximum working voltage
  • Requires careful PCB layout for optimal performance

Working Principles

The PDTC144VS,126 operates by diverting excess voltage away from sensitive components, thereby protecting them from damage due to voltage spikes and transients.

Detailed Application Field Plans

This device is commonly used in: - Consumer electronics - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the PDTC144VS,126 include: - P6SMBJ12CA - SMBJ12CA - PESD12VS1ULC

In conclusion, the PDTC144VS,126 is a semiconductor voltage suppressor that offers fast response, low clamping voltage, and high surge current capability. It is commonly used in various electronic applications to protect sensitive components from voltage transients and spikes.

Word count: 320

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät PDTC144VS,126 :n soveltamiseen teknisissä ratkaisuissa

  1. What is PDTC144VS,126?

    • PDTC144VS,126 is a NPN resistor-equipped transistor (RET) designed for general-purpose amplifier and switching applications.

  2. What are the key features of PDTC144VS,126?

    • The key features include low collector-emitter saturation voltage, high current gain, and low power dissipation.

  3. What are the typical applications of PDTC144VS,126?

    • Typical applications include audio amplification, signal processing, and general switching circuits.

  4. What is the maximum collector current of PDTC144VS,126?

    • The maximum collector current is 100mA.

  5. What is the maximum collector-emitter voltage of PDTC144VS,126?

    • The maximum collector-emitter voltage is 50V.

  6. What is the thermal resistance of PDTC144VS,126?

    • The thermal resistance is approximately 625°C/W.

  7. What is the operating temperature range of PDTC144VS,126?

    • The operating temperature range is -55°C to +150°C.

  8. What is the pin configuration of PDTC144VS,126?

    • The pin configuration is Emitter-Base-Collector.

  9. What is the package type of PDTC144VS,126?

    • The package type is SOT666.

  10. Are there any recommended alternative components to PDTC144VS,126?

    • Some recommended alternatives include BC847BS,235 and BC847BTT1G.