ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
74LVTH240MTCX
Näytä Yksityiskohdat DataSheets

74LVTH240MTCX

Product Overview

Category

The 74LVTH240MTCX belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used as a buffer/inverter in various electronic applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger inputs for noise immunity
  • 3-state outputs for bus-oriented applications

Package

The 74LVTH240MTCX is available in a small outline package (TSSOP) with 20 pins.

Essence

The essence of this product lies in its ability to provide reliable signal buffering and inversion, ensuring proper signal transmission and compatibility between different parts of an electronic circuit.

Packaging/Quantity

The 74LVTH240MTCX is typically packaged in reels or tubes, containing a quantity of 250 or 300 units per package.

Specifications

  • Supply Voltage: 2.0V to 5.5V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 4.5ns (typical)
  • Output Current: ±32mA

Detailed Pin Configuration

The 74LVTH240MTCX has a total of 20 pins, which are assigned specific functions as follows:

  1. A1: Input A1
  2. Y1: Output Y1
  3. A2: Input A2
  4. Y2: Output Y2
  5. GND: Ground
  6. A3: Input A3
  7. Y3: Output Y3
  8. A4: Input A4
  9. Y4: Output Y4
  10. OE: Output Enable
  11. Y5: Output Y5
  12. A5: Input A5
  13. Y6: Output Y6
  14. A6: Input A6
  15. Y7: Output Y7
  16. VCC: Supply Voltage
  17. A7: Input A7
  18. Y8: Output Y8
  19. A8: Input A8
  20. GND: Ground

Functional Features

  • Buffering: The 74LVTH240MTCX acts as a buffer, ensuring proper signal transmission between different parts of an electronic circuit.
  • Inversion: It can also invert the input signals, providing compatibility between circuits with different logic levels.
  • Noise Immunity: The Schmitt-trigger inputs enhance noise immunity, allowing reliable operation in noisy environments.
  • Bus-Oriented Applications: The 3-state outputs enable bus-oriented applications, where multiple devices can share a common data bus.

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient signal processing.
  • Low power consumption helps conserve energy in battery-powered devices.
  • Wide operating voltage range provides flexibility in various applications.
  • Schmitt-trigger inputs ensure reliable operation in noisy environments.
  • 3-state outputs facilitate bus-oriented applications.

Disadvantages

  • Limited output current may restrict its use in high-current applications.
  • The small outline package (TSSOP) may require careful handling during assembly.

Working Principles

The 74LVTH240MTCX operates based on CMOS technology, utilizing MOSFET transistors to achieve high-speed and low-power performance. It buffers and/or inverts the input signals according to the specified logic function. The Schmitt-trigger inputs help eliminate noise-induced errors, while the 3-state outputs allow multiple devices to share a common bus without interfering with each other.

Detailed Application Field Plans

The 74LVTH240MTCX finds applications in various electronic systems, including but not limited to: - Microcontrollers and microprocessors - Communication systems - Data acquisition systems - Industrial automation - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74LVTH240MTCX include: - SN74LVC240A by Texas Instruments - MC74VHC240 by ON Semiconductor - CD74HCT240 by Texas Instruments - 74ACT240 by Fairchild Semiconductor

These alternatives may have slight variations in specifications and pin configurations, so it is important to consult their respective datasheets for detailed information.

Word count: 577 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 74LVTH240MTCX :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of 74LVTH240MTCX in technical solutions:

  1. Q: What is the function of the 74LVTH240MTCX? A: The 74LVTH240MTCX is an octal inverting buffer/line driver with 3-state outputs.

  2. Q: What is the voltage supply range for the 74LVTH240MTCX? A: The voltage supply range for this IC is typically between 2.7V and 3.6V.

  3. Q: Can the 74LVTH240MTCX be used as a level shifter? A: Yes, it can be used as a level shifter since it supports both TTL and CMOS voltage levels.

  4. Q: What is the maximum output current of the 74LVTH240MTCX? A: The maximum output current is typically around 12mA.

  5. Q: Does the 74LVTH240MTCX have internal pull-up or pull-down resistors? A: No, it does not have internal pull-up or pull-down resistors.

  6. Q: Can I use the 74LVTH240MTCX in high-speed applications? A: Yes, this IC is designed for high-speed operation and has a propagation delay of only a few nanoseconds.

  7. Q: How many inputs and outputs does the 74LVTH240MTCX have? A: It has 8 inputs and 8 outputs.

  8. Q: Is the 74LVTH240MTCX compatible with other logic families? A: Yes, it is compatible with both TTL and CMOS logic families.

  9. Q: Can I connect multiple 74LVTH240MTCX ICs together to increase the number of inputs/outputs? A: Yes, you can connect multiple ICs in parallel to achieve more inputs or outputs.

  10. Q: What is the package type for the 74LVTH240MTCX? A: The 74LVTH240MTCX comes in a TSSOP-20 package.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for the 74LVTH240MTCX.