Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
74VHC4053N

Encyclopedia Entry: 74VHC4053N

Product Overview

Category

The 74VHC4053N belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic circuits for analog and digital signal multiplexing and demultiplexing applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Three independent 2-channel multiplexers
  • Break-before-make switching action

Package

The 74VHC4053N is available in a standard 16-pin DIP (Dual Inline Package) format.

Essence

The essence of the 74VHC4053N lies in its ability to efficiently route multiple input signals to a single output or vice versa, enabling effective signal management in various electronic systems.

Packaging/Quantity

The 74VHC4053N is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • Input Voltage Range: GND to VCC
  • On-state Resistance: 80Ω (typical)
  • On-state Flatness: ±10Ω (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74VHC4053N features a total of 16 pins, each serving a specific purpose. The pin configuration is as follows:

  1. S1 (Select Input 1)
  2. D1 (Data Input/Output 1)
  3. E1 (Enable Input 1)
  4. S2 (Select Input 2)
  5. D2 (Data Input/Output 2)
  6. E2 (Enable Input 2)
  7. GND (Ground)
  8. D3 (Data Input/Output 3)
  9. E3 (Enable Input 3)
  10. S3 (Select Input 3)
  11. D4 (Data Input/Output 4)
  12. E4 (Enable Input 4)
  13. VCC (Supply Voltage)
  14. NC (No Connection)
  15. Z (Common Output)
  16. GND (Ground)

Functional Features

  • Three independent 2-channel multiplexers
  • Wide operating voltage range allows compatibility with various systems
  • Break-before-make switching action ensures signal integrity during switching operations
  • High-speed operation enables efficient signal routing in time-critical applications
  • Low power consumption contributes to energy-efficient designs

Advantages and Disadvantages

Advantages

  • Versatile multiplexing and demultiplexing capabilities
  • Wide operating voltage range for compatibility
  • High-speed operation for time-critical applications
  • Low power consumption for energy efficiency

Disadvantages

  • Limited number of channels compared to other ICs in the same category
  • May require additional external components for certain applications

Working Principles

The 74VHC4053N operates based on the principle of analog and digital signal multiplexing and demultiplexing. It utilizes internal switches controlled by the select inputs (S1, S2, S3) to route the desired input signals to the common output (Z). The enable inputs (E1, E2, E3) control the activation of the respective multiplexers.

Detailed Application Field Plans

The 74VHC4053N finds application in various electronic systems, including but not limited to: - Audio and video signal routing in multimedia devices - Data acquisition systems - Communication equipment - Industrial automation - Test and measurement instruments

Detailed and Complete Alternative Models

  • CD4053B: Similar functionality, available in different package options
  • 74HC4053: Compatible with a wider supply voltage range
  • DG406DJ: Higher channel count, suitable for more complex signal routing requirements

These alternative models offer similar or enhanced features compared to the 74VHC4053N, providing flexibility in choosing the most suitable IC for specific applications.

In conclusion, the 74VHC4053N is a versatile integrated circuit used for signal multiplexing and demultiplexing. Its high-speed operation, low power consumption, and wide operating voltage range make it an ideal choice for various electronic systems. While it has some limitations in terms of channel count, there are alternative models available to cater to different application requirements.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 74VHC4053N :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of 74VHC4053N in technical solutions:

  1. Q: What is the 74VHC4053N? A: The 74VHC4053N is a triple 2-channel analog multiplexer/demultiplexer IC.

  2. Q: What is the purpose of the 74VHC4053N? A: The purpose of this IC is to provide a means of routing analog signals between multiple inputs and outputs in electronic circuits.

  3. Q: What is the voltage range supported by the 74VHC4053N? A: The 74VHC4053N supports a wide voltage range from 2V to 5.5V, making it compatible with various digital and analog systems.

  4. Q: How many channels does the 74VHC4053N have? A: The 74VHC4053N has three independent channels, each with two input/output pins.

  5. Q: Can the 74VHC4053N handle both analog and digital signals? A: Yes, the 74VHC4053N can handle both analog and digital signals, making it versatile for various applications.

  6. Q: What is the maximum current rating of the 74VHC4053N? A: The 74VHC4053N has a maximum current rating of 25mA per channel.

  7. Q: How does the 74VHC4053N control the routing of signals? A: The routing of signals is controlled by the logic levels applied to the select pins (S0, S1, and S2) of the IC.

  8. Q: Can the 74VHC4053N be used for bidirectional signal routing? A: Yes, the 74VHC4053N can be used for bidirectional signal routing, allowing signals to flow in both directions.

  9. Q: What is the typical ON resistance of the 74VHC4053N? A: The typical ON resistance of the 74VHC4053N is around 100 ohms.

  10. Q: Are there any specific precautions to consider when using the 74VHC4053N? A: It is important to ensure that the voltage levels applied to the IC do not exceed its specified limits and to avoid exceeding the maximum current ratings to prevent damage to the device.

Please note that these answers are general and may vary depending on the specific application and requirements. Always refer to the datasheet and consult with an expert for accurate information.