ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BC182LB_J35Z
Näytä Yksityiskohdat DataSheets

BC182LB_J35Z

Product Overview

Category: Electronic Component
Use: Amplification in electronic circuits
Characteristics: Small signal NPN transistor, low power consumption, high gain
Package: TO-92
Essence: Amplifying weak electrical signals
Packaging/Quantity: Typically sold in reels of 2000 units

Specifications

  • Maximum Collector-Emitter Voltage: 50V
  • Maximum Collector Current: 100mA
  • Power Dissipation: 500mW
  • Transition Frequency: 250MHz
  • Operating Temperature Range: -65°C to 150°C

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High voltage and current gain
  • Low noise and distortion
  • Wide frequency response

Advantages and Disadvantages

Advantages: - Small size - Low cost - Versatile usage

Disadvantages: - Limited power handling capability - Susceptible to temperature variations

Working Principles

The BC182LB_J35Z operates as a small-signal NPN transistor, amplifying weak electrical signals by controlling the flow of current between its collector and emitter terminals.

Detailed Application Field Plans

  1. Audio amplification circuits
  2. Signal processing circuits
  3. Oscillator circuits

Detailed and Complete Alternative Models

  1. BC547
  2. 2N2222
  3. 2N3904
  4. BC548

This completes the entry for BC182LB_J35Z, providing comprehensive information on its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BC182LB_J35Z :n soveltamiseen teknisissä ratkaisuissa

  1. What is BC182LB_J35Z?

    • BC182LB_J35Z is a small-signal NPN bipolar junction transistor (BJT) commonly used in electronic circuits for amplification and switching purposes.

  2. What are the typical applications of BC182LB_J35Z?

    • BC182LB_J35Z is often used in audio amplifiers, signal processing circuits, and general purpose switching applications.

  3. What are the key electrical characteristics of BC182LB_J35Z?

    • The key electrical characteristics include a maximum collector current of 100mA, a maximum collector-emitter voltage of 50V, and a DC current gain (hFE) ranging from 110 to 800.

  4. How do I identify the pinout of BC182LB_J35Z?

    • The pinout of BC182LB_J35Z is typically identified as the emitter (E), base (B), and collector (C) pins, with the flat side of the transistor facing towards you and the pins pointing down.

  5. What are some common alternatives to BC182LB_J35Z?

    • Common alternatives to BC182LB_J35Z include 2N2222, 2N3904, and PN2222A transistors, which have similar characteristics and can be used as substitutes in many applications.

  6. Can BC182LB_J35Z be used in high-frequency applications?

    • BC182LB_J35Z is not suitable for high-frequency applications due to its limited frequency response and transition frequency.

  7. What are the recommended operating conditions for BC182LB_J35Z?

    • The recommended operating conditions include a maximum collector current of 100mA, a maximum power dissipation of 500mW, and an operating temperature range of -65°C to 200°C.

  8. How should BC182LB_J35Z be handled to prevent damage?

    • BC182LB_J35Z should be handled with care to avoid static discharge and excessive heat, and it should be stored in anti-static packaging when not in use.

  9. Can BC182LB_J35Z be used in automotive applications?

    • BC182LB_J35Z is not specifically designed for automotive applications and may not meet the stringent requirements for automotive-grade components.

  10. Where can I find detailed datasheets and application notes for BC182LB_J35Z?

    • Detailed datasheets and application notes for BC182LB_J35Z can be found on semiconductor manufacturer websites, distributor platforms, and electronics component databases.