The CAT24C512XI-T2 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
The CAT24C512XI-T2 is available in an 8-pin SOIC (Small Outline Integrated Circuit) package.
The essence of this chip lies in its ability to store and retrieve data reliably, even in the absence of power. It provides a convenient and efficient solution for applications requiring non-volatile memory.
The CAT24C512XI-T2 is typically sold in reels containing multiple units. The exact quantity may vary depending on the supplier.
The CAT24C512XI-T2 features the following pin configuration:
| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | A0 | Address Input Bit 0 | | 2 | A1 | Address Input Bit 1 | | 3 | A2 | Address Input Bit 2 | | 4 | GND | Ground | | 5 | SDA | Serial Data Input/Output | | 6 | SCL | Serial Clock Input | | 7 | WP | Write Protect | | 8 | VCC | Power Supply Voltage |
The CAT24C512XI-T2 utilizes EEPROM technology to store data. It consists of an array of memory cells that can be electrically programmed and erased. When data is written to the chip, it is stored in these memory cells. The stored data can be read back at any time, even after power loss. The I2C interface facilitates communication between the chip and the host device, allowing for easy data transfer.
The CAT24C512XI-T2 finds applications in various fields, including:
These alternative models
Sure! Here are 10 common questions and answers related to the application of CAT24C512XI-T2 in technical solutions:
Q: What is CAT24C512XI-T2? A: CAT24C512XI-T2 is a 512-Kb I2C-compatible EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by ON Semiconductor.
Q: What is the operating voltage range for CAT24C512XI-T2? A: The operating voltage range for CAT24C512XI-T2 is typically between 1.7V and 5.5V.
Q: How much data can CAT24C512XI-T2 store? A: CAT24C512XI-T2 has a storage capacity of 512 kilobits, which is equivalent to 64 kilobytes or 65,536 bytes.
Q: What is the maximum clock frequency supported by CAT24C512XI-T2? A: CAT24C512XI-T2 supports a maximum clock frequency of 400 kHz.
Q: Can CAT24C512XI-T2 be used for both read and write operations? A: Yes, CAT24C512XI-T2 supports both read and write operations, allowing you to store and retrieve data as needed.
Q: Does CAT24C512XI-T2 have any built-in security features? A: No, CAT24C512XI-T2 does not have any built-in security features. It is a standard EEPROM chip without encryption or protection mechanisms.
Q: Can multiple CAT24C512XI-T2 chips be connected together on the same I2C bus? A: Yes, multiple CAT24C512XI-T2 chips can be connected together on the same I2C bus by assigning unique addresses to each chip.
Q: What is the typical write endurance of CAT24C512XI-T2? A: CAT24C512XI-T2 has a typical write endurance of 1 million cycles, meaning you can write data to it approximately 1 million times before it may start to degrade.
Q: Is CAT24C512XI-T2 suitable for automotive applications? A: Yes, CAT24C512XI-T2 is designed to meet the requirements of automotive applications and can operate in harsh environments.
Q: Can CAT24C512XI-T2 retain data during power loss? A: Yes, CAT24C512XI-T2 has built-in EEPROM technology that allows it to retain data even when power is lost, ensuring data integrity.
Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.