ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
DM74S157N
Näytä Yksityiskohdat DataSheets

DM74S157N

Product Overview

Category

DM74S157N belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronics for data multiplexing applications.

Characteristics

  • DM74S157N is a quad 2-input multiplexer with complementary outputs.
  • It operates on a supply voltage range of 4.75V to 5.25V.
  • The IC has a low power consumption and high noise immunity.
  • It is designed to work in a wide temperature range, typically from -55°C to +125°C.

Package

DM74S157N is available in a 16-pin dual in-line package (DIP).

Essence

The essence of DM74S157N lies in its ability to select one of four data inputs and route it to a single output line based on the control inputs.

Packaging/Quantity

DM74S157N is typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier.

Specifications

  • Supply Voltage Range: 4.75V to 5.25V
  • Input Voltage Range: 0V to Vcc
  • Output Voltage Range: 0V to Vcc
  • Operating Temperature Range: -55°C to +125°C
  • Propagation Delay Time: 15ns (max)
  • Power Dissipation: 400mW (max)

Detailed Pin Configuration

  1. A0: Data Input A0
  2. B0: Data Input B0
  3. C0: Data Input C0
  4. D0: Data Input D0
  5. GND: Ground
  6. Y: Multiplexed Output
  7. E: Enable Input
  8. Vcc: Positive Power Supply
  9. D1: Data Input D1
  10. C1: Data Input C1
  11. B1: Data Input B1
  12. A1: Data Input A1
  13. D2: Data Input D2
  14. C2: Data Input C2
  15. B2: Data Input B2
  16. A2: Data Input A2

Functional Features

  • DM74S157N can select one of the four data inputs (A, B, C, or D) based on the control inputs (A0, A1, and A2).
  • The selected input is routed to the output pin (Y).
  • The complementary outputs provide both inverted and non-inverted versions of the selected input.

Advantages and Disadvantages

Advantages

  • High noise immunity ensures reliable operation in noisy environments.
  • Low power consumption makes it suitable for battery-powered applications.
  • Wide operating temperature range allows for use in extreme conditions.
  • Complementary outputs provide flexibility in circuit design.

Disadvantages

  • Limited number of inputs may restrict its application in complex systems.
  • Propagation delay time may affect the overall system performance in high-speed applications.

Working Principles

DM74S157N operates based on the principle of multiplexing. It uses the control inputs (A0, A1, and A2) to select one of the four data inputs (A, B, C, or D). The selected input is then routed to the output pin (Y). The complementary outputs (Y and Y̅) provide both the inverted and non-inverted versions of the selected input.

Detailed Application Field Plans

DM74S157N finds applications in various digital systems where data multiplexing is required. Some common application areas include:

  1. Data communication systems
  2. Digital signal processing
  3. Microcontrollers and microprocessors
  4. Industrial automation
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. SN74LS157N: Similar quad 2-input multiplexer with complementary outputs, but operates on a different supply voltage range.
  2. CD4051B: Analog multiplexer/demultiplexer IC with similar pin configuration, but designed for analog signals.
  3. MC14051B: CMOS analog multiplexer/demultiplexer IC with higher input/output voltage range.

These alternative models can be considered based on specific requirements and compatibility with the system design.

Word count: 570 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät DM74S157N :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of DM74S157N in technical solutions:

  1. Q: What is DM74S157N? A: DM74S157N is a quad 2-input multiplexer IC (Integrated Circuit) commonly used in digital electronics.

  2. Q: What is the purpose of DM74S157N? A: The purpose of DM74S157N is to select one of four input data lines and route it to a single output line based on the control inputs.

  3. Q: How many input lines does DM74S157N have? A: DM74S157N has four input lines, labeled A, B, C, and D.

  4. Q: How many control inputs does DM74S157N have? A: DM74S157N has two control inputs, labeled G1 and G2.

  5. Q: How does DM74S157N work? A: When G1 and G2 are set to specific logic levels, the selected input line is connected to the output line.

  6. Q: What is the output line called in DM74S157N? A: The output line is called Y.

  7. Q: What is the power supply voltage range for DM74S157N? A: The power supply voltage range for DM74S157N is typically between 4.75V and 5.25V.

  8. Q: What is the maximum operating frequency of DM74S157N? A: The maximum operating frequency of DM74S157N is typically around 50 MHz.

  9. Q: Can DM74S157N be used in both digital and analog circuits? A: No, DM74S157N is specifically designed for digital circuits and should not be used in analog applications.

  10. Q: What are some common applications of DM74S157N? A: DM74S157N is commonly used in multiplexing data inputs, address decoding, data routing, and signal selection in various digital systems.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.