ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
FPF1004
Näytä Yksityiskohdat DataSheets

FPF1004 - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuits (ICs)

Use: Power Switch IC

Characteristics: - Low RDS(ON) MOSFET - Overcurrent Protection - Thermal Shutdown Protection - Under Voltage Lockout (UVLO) - Fault Flag Indication

Package: 6-Lead WLCSP (Wafer Level Chip Scale Package)

Essence: The FPF1004 is a power switch IC designed for various applications that require high efficiency and protection features.

Packaging/Quantity: The FPF1004 is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Maximum Continuous Current: 1.5A
  • RDS(ON): 80mΩ (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The FPF1004 has the following pin configuration:

  1. EN (Enable): Enable control pin.
  2. IN (Input): Power input pin.
  3. OUT (Output): Power output pin.
  4. GND (Ground): Ground reference pin.
  5. FLT (Fault): Fault flag indication pin.
  6. VBAT (Battery): Battery voltage input pin.

Functional Features

  1. Low RDS(ON) MOSFET: The FPF1004 incorporates a low resistance MOSFET, resulting in reduced power dissipation and improved efficiency.

  2. Overcurrent Protection: The IC provides overcurrent protection, safeguarding the circuit from excessive current flow.

  3. Thermal Shutdown Protection: In case of excessive temperature rise, the FPF1004 activates thermal shutdown protection, preventing damage to the device.

  4. Under Voltage Lockout (UVLO): The UVLO feature ensures that the IC operates within the specified voltage range, enhancing system reliability.

  5. Fault Flag Indication: The FLT pin provides a fault flag indication, allowing for easy detection and troubleshooting of any issues.

Advantages and Disadvantages

Advantages: - Low power dissipation - High efficiency - Overcurrent and thermal protection - Compact package size

Disadvantages: - Limited maximum continuous current (1.5A)

Working Principles

The FPF1004 acts as a power switch, controlling the flow of current between the input and output pins. When the EN pin is activated, the internal MOSFET conducts, allowing power to pass through from the input to the output. The IC continuously monitors the current and temperature, activating protection features when necessary.

Detailed Application Field Plans

The FPF1004 is suitable for various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Power management circuits

Detailed and Complete Alternative Models

  1. FPF1003: Similar to FPF1004, but with a lower maximum continuous current rating of 1A.
  2. FPF1005: Similar to FPF1004, but with a higher maximum continuous current rating of 2A.
  3. FPF1006: Similar to FPF1004, but with additional features such as reverse polarity protection.

These alternative models provide options with varying specifications to cater to different application requirements.

Word count: 342 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät FPF1004 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of FPF1004 in technical solutions:

  1. Q: What is FPF1004? A: FPF1004 is a power switch integrated circuit (IC) commonly used for load management and protection in various technical solutions.

  2. Q: What is the maximum voltage rating of FPF1004? A: The maximum voltage rating of FPF1004 is typically 20 volts.

  3. Q: Can FPF1004 handle high current loads? A: Yes, FPF1004 is designed to handle high current loads up to a certain limit, usually around 5 amps.

  4. Q: How does FPF1004 protect against overcurrent conditions? A: FPF1004 incorporates built-in overcurrent protection mechanisms such as current limiting and thermal shutdown to safeguard the circuit from excessive current flow.

  5. Q: Can FPF1004 be used for reverse polarity protection? A: Yes, FPF1004 can be utilized for reverse polarity protection by connecting it in series with the power supply.

  6. Q: Is FPF1004 suitable for battery-powered applications? A: Yes, FPF1004 is commonly used in battery-powered applications due to its low quiescent current and efficient power management features.

  7. Q: Does FPF1004 have any input/output voltage limitations? A: FPF1004 has a wide input voltage range, typically from 2.7 volts to 20 volts, making it compatible with various power supply configurations.

  8. Q: Can FPF1004 be controlled using a microcontroller or digital signals? A: Yes, FPF1004 can be controlled using digital signals or microcontrollers through its enable pin or other control inputs.

  9. Q: Does FPF1004 have any built-in protection against short circuits? A: Yes, FPF1004 incorporates short circuit protection mechanisms to prevent damage to the load or the IC itself.

  10. Q: What are some common applications of FPF1004? A: FPF1004 is commonly used in applications such as portable devices, battery chargers, power distribution systems, and automotive electronics for load management and protection purposes.

Please note that the specific details and specifications may vary depending on the manufacturer's datasheet and application requirements.