ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MC100EL16DT
Näytä Yksityiskohdat DataSheets

MC100EL16DT

Product Overview

Category

MC100EL16DT belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for signal transmission and reception.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Differential input and output capability

Package

MC100EL16DT is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of MC100EL16DT lies in its ability to provide reliable and efficient signal transmission and reception in high-speed electronic systems.

Packaging/Quantity

MC100EL16DT is typically sold in reels, with each reel containing a quantity of 250 units.

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Input Voltage Range: -2.0V to VCC + 2.0V
  • Output Voltage Range: -2.0V to VCC + 2.0V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.4 ns (typical)
  • Maximum Clock Frequency: 2.5 GHz

Detailed Pin Configuration

  1. VCC - Power supply voltage
  2. GND - Ground reference
  3. CLK - Clock input
  4. D - Differential data input
  5. Q - Differential data output
  6. /Q - Complementary differential data output
  7. /CLK - Complementary clock input
  8. NC - No connection

Functional Features

  • High-speed differential data transmission
  • Compatible with various logic families
  • ESD protection on all inputs and outputs
  • Internal biasing for improved noise immunity

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data transmission.
  • Wide operating voltage range allows compatibility with different systems.
  • Differential input and output capability reduces noise interference.

Disadvantages

  • Limited availability of alternative models from other manufacturers.
  • Relatively higher cost compared to some similar ICs.

Working Principles

MC100EL16DT operates based on differential signaling, where data is transmitted as the difference between two complementary signals. This differential approach provides improved noise immunity and enables high-speed operation.

Detailed Application Field Plans

MC100EL16DT finds applications in various fields, including: 1. Telecommunications: Used in high-speed data transmission systems. 2. Networking: Employed in network switches and routers for efficient signal processing. 3. Industrial Automation: Integrated into control systems for reliable data communication. 4. Test and Measurement: Utilized in equipment for accurate signal analysis.

Detailed and Complete Alternative Models

While MC100EL16DT is a widely used IC, there are alternative models available from other manufacturers that offer similar functionality. Some notable alternatives include: - SN65LVDS31 from Texas Instruments - SY100EL16VZC from Micrel Inc. - MAX9126 from Maxim Integrated

These alternative models can be considered based on specific requirements and availability in the market.

Word count: 460 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MC100EL16DT :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MC100EL16DT in technical solutions:

  1. Q: What is MC100EL16DT? A: MC100EL16DT is a differential receiver IC (integrated circuit) commonly used in high-speed digital communication systems.

  2. Q: What is the operating voltage range for MC100EL16DT? A: The operating voltage range for MC100EL16DT is typically between -4.2V and -5.7V.

  3. Q: What is the maximum data rate supported by MC100EL16DT? A: MC100EL16DT can support data rates up to 3.8 Gbps (gigabits per second).

  4. Q: Can MC100EL16DT be used in both single-ended and differential applications? A: No, MC100EL16DT is specifically designed for differential applications only.

  5. Q: What is the input common-mode voltage range for MC100EL16DT? A: The input common-mode voltage range for MC100EL16DT is typically between -2V and -4V.

  6. Q: Does MC100EL16DT require external termination resistors? A: Yes, MC100EL16DT requires external termination resistors to match the characteristic impedance of the transmission line.

  7. Q: Can MC100EL16DT be used in low-power applications? A: No, MC100EL16DT is not suitable for low-power applications as it consumes relatively higher power.

  8. Q: Is MC100EL16DT compatible with other logic families? A: MC100EL16DT is compatible with ECL (Emitter-Coupled Logic) logic family but may require level shifting for compatibility with other logic families.

  9. Q: What is the typical propagation delay of MC100EL16DT? A: The typical propagation delay of MC100EL16DT is around 400 ps (picoseconds).

  10. Q: Can MC100EL16DT be used in high-temperature environments? A: Yes, MC100EL16DT has a wide operating temperature range and can be used in high-temperature environments up to 125°C.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.