ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MC74LVX245MELG
Näytä Yksityiskohdat DataSheets

MC74LVX245MELG

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifter and Voltage Translator
  • Characteristics: Low-voltage, high-speed, non-inverting
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Logic Level Converter
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • High-Level Input Voltage: 2.0V to VCC
  • Low-Level Input Voltage: GND to 0.8V
  • High-Level Output Voltage: VCC - 0.3V
  • Low-Level Output Voltage: 0.3V
  • Maximum Input Current: ±10mA
  • Maximum Output Current: ±24mA
  • Propagation Delay Time: 6ns (typical)

Detailed Pin Configuration

  1. OE (Output Enable)
  2. A1 (Input/Output)
  3. B1 (Input/Output)
  4. A2 (Input/Output)
  5. B2 (Input/Output)
  6. A3 (Input/Output)
  7. B3 (Input/Output)
  8. GND (Ground)
  9. B4 (Input/Output)
  10. A4 (Input/Output)
  11. B5 (Input/Output)
  12. A5 (Input/Output)
  13. B6 (Input/Output)
  14. A6 (Input/Output)
  15. VCC (Supply Voltage)
  16. DIR (Direction Control)

Functional Features

  • Non-inverting level shifting between two voltage domains
  • Wide supply voltage range allows compatibility with various systems
  • High-speed operation for efficient data transfer
  • Output enable pin for easy control of the device
  • Direction control pin for bidirectional data transmission

Advantages

  • Provides seamless voltage translation between different logic levels
  • Supports bidirectional data transfer
  • Low power consumption
  • Compact and easy-to-use package
  • High-speed operation for time-critical applications

Disadvantages

  • Limited number of input/output channels (6 channels)
  • Not suitable for high-voltage applications
  • Requires careful consideration of signal integrity in mixed voltage systems

Working Principles

The MC74LVX245MELG is a non-inverting level shifter and voltage translator integrated circuit. It allows seamless translation of digital signals between two voltage domains, typically between low-voltage and higher-voltage systems. The device operates by using a combination of MOSFETs and CMOS technology to ensure efficient and reliable data transfer.

Detailed Application Field Plans

The MC74LVX245MELG is commonly used in various applications where level shifting and voltage translation are required. Some of the typical application fields include: 1. Communication systems 2. Data acquisition systems 3. Industrial automation 4. Consumer electronics 5. Automotive electronics

Detailed and Complete Alternative Models

  1. SN74LVC245A: Similar functionality with 8 channels and wider supply voltage range.
  2. TXB0108: Bidirectional voltage-level translator with 8 channels and automatic direction control.
  3. PCA9306: I2C-bus voltage-level translator with 2 channels and built-in level shifting logic.

Please note that the above alternatives may have different specifications and pin configurations. It is important to refer to the respective datasheets for detailed information.

Word count: 346 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MC74LVX245MELG :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MC74LVX245MELG:

  1. Question: What is MC74LVX245MELG?
    - Answer: MC74LVX245MELG is a specific type of integrated circuit (IC) known as a bus transceiver. It is commonly used for level shifting and voltage translation in digital systems.

  2. Question: What is the operating voltage range of MC74LVX245MELG?
    - Answer: The operating voltage range of MC74LVX245MELG is typically between 2.0V and 5.5V.

  3. Question: How many channels does MC74LVX245MELG have?
    - Answer: MC74LVX245MELG has 8 bidirectional channels, which means it can transmit and receive data on 8 different lines.

  4. Question: Can MC74LVX245MELG be used for level shifting between different voltage domains?
    - Answer: Yes, MC74LVX245MELG is commonly used for level shifting between different voltage domains, such as between 3.3V and 5V systems.

  5. Question: What is the maximum data transfer rate supported by MC74LVX245MELG?
    - Answer: MC74LVX245MELG supports high-speed data transfer rates up to 100 MHz.

  6. Question: Does MC74LVX245MELG have any built-in protection features?
    - Answer: Yes, MC74LVX245MELG has built-in ESD protection diodes to safeguard against electrostatic discharge.

  7. Question: Can MC74LVX245MELG be used in both parallel and serial communication systems?
    - Answer: Yes, MC74LVX245MELG can be used in both parallel and serial communication systems, depending on the application requirements.

  8. Question: What is the power supply voltage required for MC74LVX245MELG?
    - Answer: MC74LVX245MELG typically requires a single power supply voltage of 3.3V or 5V.

  9. Question: Can MC74LVX245MELG handle bidirectional data transmission?
    - Answer: Yes, MC74LVX245MELG is designed to handle bidirectional data transmission, allowing data to flow in both directions simultaneously.

  10. Question: Are there any specific precautions to consider when using MC74LVX245MELG?
    - Answer: It is important to ensure that the input and output voltage levels are within the specified range to prevent damage to the IC. Additionally, proper decoupling capacitors should be used to stabilize the power supply.